I provided Roadmaster with your serial number, and I'm sorry to say that your tow bar is old enough that Roadmaster no longer offers replacement arms for it. Your best bet would be to replace the tow bar with a new Sterling, part # RM-576. view full answer...
The Bestop Rear Window replacement # B354-24 will only work with the Bestop Replace-A-Top # B5136401 which is for certain model Chevy Tracker, Geo Tracker, and Suzuki Sidekick models. This absolutely will not fit your Jeep.
On your 2003 Jeep Wrangler, a Bestop will have certain features. I've attached an article to help with the frame comparison.
I've linked the page to replacement options like the Bestop Replace-A-Top for Jeep - Black Diamond # B5117835 for a complete replacement... view full answer...
There is indeed a replacement rubber cover for etrailer base plates like your etrailer Invisible Base Plate Kit # e98949. The correct replacement cover for your base plates are the following:
- Replacement Cover for Demco RV Tabless Base Plates # DM15675 view full answer...
The small pin that holds the brackets to the ramp of the MaxxTow carrier # MT70260 should fit in a 5/16 inch diameter hole. We have 5/16 inch diameter snapper pin # 516-134TR that could work for you. It is a little longer than the regular pins on the carrier. view full answer...
Based on the information you have given me you have the Roadmaster Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars # RM-035 or # RM-035-1.
Since you want to stick with Roadmaster parts, the correct replacement pin is the Replacement Hitch Pin for Roadmaster Jeep D-Ring Bumper Mount Tow Bar Adapters - Qty 1 # RM-910044. This hitch pin is the direct replacement part for the pin that came with the # RM-035 and # RM-035-1. The adapter is designed to fit D tabs... view full answer...
We do offer a complete side- and rear-window kit from Bestop that fits the 2008 Wrangler, part # B5812935. This kits features 31-percent-tint and heavy-duty zippers.
A replacement rear window only will need to be sourced from Jeep. view full answer...
Trailer wiring can't be used in reverse in a flat towing situation. You would need to go with a flat towing wiring kit confirmed as a fit for your 2016 Jeep Wrangler.
For that the Hopkins kit part # HM56200 would be exactly what you need. I attached an install video for this for more info as well. view full answer...
The soft tops we offer for your 1997 Jeep Wrangler all have windows included. We do offer some soft tops for your Wrangler that do not have the doors included.
One of the systems I recommend is the Rampage Jeep Top, part # RA109735. This top is made of heavy-duty sailcloth fabric and removable windows. This top requires no bows and uses the factory hardware for installation. This is a Black Diamond Color.
I have attached a link to our product page for the tops we have available for your... view full answer...
It sure is!
The part you're looking for is # TJD2SP-12900-GBX - Replacement Gearbox for etrailer and Ram 2-Speed Square Jacks - 10,000 lbs. This is the correct replacement for your jack with part # TJD2SP-12000SP-F. view full answer...
You are correct that Thule now owns TracRac, but that doesn't mean that you're out of luck when it comes to parts! Although they'll look different than the ones that you currently have, Thule tells me that you can use the Replacement Modular Clamp for TracRac G2 and TracONE Truck Bed Ladder Racks # PT-27064 to replace the old 01-22913 clamps that came on your TracRac 22940. These are sold as single clamps, so you would need to purchase 8 of them to get all of the clamps you need to re-mount... view full answer...
The Bestop TrailMax II Fixed High Back seats are available in Spice, Charcoal, Black and Black Denim.
You can see all of the available seats by clicking on the provided link.
The seats are designed to be installed on the OE seat riser. view full answer...
Both your axles will use the same Grease Seal # 58846. I am going to list all the common replacement parts for each axle so that you have that information.
4,400lb Axle
Inner Bearing # L68149
Outer Bearing # LM67048
Inner Race # L68111
Outer Race # LM67010
Grease Seal # 58846
Brake Assemblies # K23-462-463-00
3,500lb Axle
Inner Bearing # L68149
Outer Bearing # L44649
Inner Race # L68111
Outer Race # L44610
Grease Seal # 58846
Brake Assemblies # 23-468-469 view full answer...
It actually looks like the ladder you currently have is exactly what you're already looking for - you just need to remove the screws from those bottom supports and then you can flip the ladder up since it's hinged higher up. If that isn't working then what you can do is remove your current ladder and then use a fold-up ladder like the Telesteps # TE74FR which can then be stored in your motorhome. view full answer...
We have the door skins that can be used on your Jeep door frames in Spice color. These are part # RA89717.
I have attached a photo of the door skin so you can see what color the skin is. We do not offer a door frame with the skin other than in Black but we also offer the door frame that can be used with the # RA89717. The door frame without a skin installed is part # RA89799. view full answer...
I contacted our representative at Bestop to inquire about the Replace-A-Top for Jeep, part # B5112009, for your 1989 Jeep Wrangler.
Our representative at Bestop informed me that part # B5112009 is a factory replacement top and that you would need to obtain hardware from your Jeep dealership.
For a complete replacement top with hardware, we have the Bestop Supertop Soft Top, part # B5159901.
I have linked an FAQ on Jeep top replacement hardware that you may find as a good reference. view full answer...
It sounds like you are needing the Rampage Replacement Windshield Channel # RA901001. This will replace your old or damaged factory windshield channel so that you can attach the factory or Rampage soft top to the Jeep. These are confirmed to fit your 1990 Jeep Wrangler and all of the necessary hardware is included.
I have attached the complete installation instructions on this product that you can also take a look at. view full answer...
To replace the covers on your Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521448-5 on your 2015 Jeep Wrangler you need the Base Plate 1-1/2" Receiver Covers # RM-210.
Please note that you might need to trim them a little to get them to fit properly since they'll be a bit snug. view full answer...
When picking out the correct rise/drop ball mount for a towing setup you sometimes can't get exactly the amount you need. The good news is that if you get as close as you can (in your case within 1/2 inch) you will be fine. So using the hitch ball # 40038 that you referenced with the ball mount # C45240 would be a great choice and would work well for you. view full answer...
I have a solution for you and it looks like the C001478 and C001477 are the arms for a Roadmaster 921-3 MX series base plate kit, which would be the Roadmaster Direct-Connect Base Plate Kit - Removable Arms
Item # 1429-3 for your 2008 Jeep Wrangler. To replace those arms you will need to use the Roadmaster Replacement Arms for Base Plate Kits part # RM-ARMS.
There is a form attached to this page that will need to be filled out and sent in so we can ensure that the parts you're ordering... view full answer...
It sounds like your 2008 Jeep Wrangler has the base plate with the crossbar and you need the Replacement Quick Disconnect Crossbar Assembly for Roadmaster Motorhome Mounted Tow Bars # 910021-00. If you have the base plate with the arms and not the crossbars then you would need the # RM-ARMS to connect to the # RM-520 instead.
If you don't have a base plate at all on your Wrangler then the correct base plate will depend on the bumper style. See the link below which lists all of the available... view full answer...
Go To Results