The black washers are called conical tooth washers. The ones that are included with the Curt round bar systems are 3/4 inch so for a replacement you can use # 3232. They are sold in quantities of 1. view full answer...
I contacted Westin and the mounting kit/hardware for their # 28-51035 R5 Nerf Bars is not available separately at this time. The only thing we could do to replace it would be a full replacement of the entire system, unfortunately. view full answer...
GM actually uses the # HM40975 as the OEM trailer connector, so that's what I'd recommend you use. The connector will plug into the socket located above the spare tire. You'll need to free the connector from the frame member and uncoil it so it will reach the rear bumper.
The truck is indeed pre-wired for a brake controller. To complete the installation, you'll need brake controller and the vehicle-specific wiring harness. I'd highly recommend the Tekonsh P3, part # 90195. The P3... view full answer...
If you need to add a ladder rack to your 2021 GMC Sierra 1500 wit the 5-3/4 foot bed but already have a RetraxPRO MX # RT80471 installed, you are in luck! We have actually been asked this a few times as it is pretty common to want both options.
With that said, you will need to swap out your current side rails for the Replacement Side Rails for RetraxPRO Hard Tonneau Cover with Trax Rails # RTX27FR. We have confirmed with Retrax that this is ok to do and it will give you the ability to... view full answer...
The replacement hardware kit for a Westin HDX Grille Guard for a 2014 GMC Sierra 1500 # 57-3690 or # 57-3695 is available with # 57-369PK. I can't confirm that this will work on anything outside of a Westin HDX and to my knowledge Westin is still doing business under that name. view full answer...
You need the Replacement Tarp # A38BG for the Access Lorado Soft, Roll-Up Tonneau Cover # A42319 on your 2018 GMC Sierra 1500 with a 5-1/2' bed. This is what your serial number O1704278 is confirmed to fit. view full answer...
The part you need is the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera # FR87PR. This works with your 2021 GMC Sierra 1500. view full answer...
The replacement hardware for the Westin Sportsman Grille Guard # 40-3695 on your 2014 GMC Sierra 1500 can be found with the part # 40-369PK. This includes all the necessary hardware to mount this particular grille guard to your Sierra. view full answer...
I can certainly point you in the right direction. When replacing an equalizer we want to keep it as close to the stock size as possible. There is a small amount of tolerance, but not much. The Dexter easy flex # K71-653-00 i'm afraid is going to be too big to fit correctly into your suspension.
If you want to do an equalizer upgrade, I recommend the Road Armor Shock Absorbing Equalizer # LC696740. This measures 6" long center hole to center hole, and 3-1/4" tall. This will be much closer... view full answer...
It sounds like you are looking for a replacement threaded hitch pin for your Thule bike rack.
Since all Thule bike racks use the same pin, you can use part # 853-5917 to replace yours. I've linked to a video review of this bolt for you to look at.
Of course, if you need more than just the bolt, we also have the M12 Lock Washer, part # 956122159. view full answer...
If you are just looking to replace just the knobs on the Toolbox Mounting Kit for TracRac part # TH25200 then you can use the Replacement Hand Knob for TracRac Ladder Rack part # TAKB-90004. These are round knobs and the knobs included in the toolbox mounting kit are more of a triangle shape but nonetheless will still work for you. We do not have the triangle shaped knobs at this time.
The above part is only for the replacement knob, you will also need the threaded stud in order to attach... view full answer...
The cover you need for your 2012 Palomino Bronco 1251 SB truck camper is the Camco UltraGuard Slide-In Camper Cover # CAM45771 which fits up to 16-1/2' long truck bed campers. There aren't any other options available but this is still a great cover backed by a 2-year limited warranty so you know they stand behind their product. view full answer...
If you have the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-782 on your 2015 GMC Sierra 1500 which is for a 5-1/2' long bed then you will need the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks part # TH21782 but if you have the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-781 on your 2015 GMC Sierra 1500 which is for a 6-1/2' long bed then you will need the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks part # TH21781. view full answer...
We do have a replacement shroud for the Coleman Mach air conditioners. The correct replacement is part # MA8335A5261.
If you click the provided link, you can see a product description video featuring the # MA8335A5261 replacement shroud. view full answer...
You will need the Replacement Inner Arm for Roadmaster BlackHawk 2 All Terrain and Falcon All-Terrain Tow Bar, part # 910021-65. It is a driver's side replacement inner arm for the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10K, part # RM-422, for serial numbers between 0 and 16,500.
I have included a product description link and a video review link below. view full answer...
I was able to get in touch with my contact over at Extang and they confirmed that you can use the # EX43445B as the replacement cover for your original Extang Trifecta tonneau cover. view full answer...
I spoke to a representative for Extang today. The tonneau cover you have installed on your 2012 Ram 3500 with the 6.5' truck bed is the Extang Trifecta Signature Soft Tonneau Cover - Folding - Canvas. Extang's representative told me that the replacement tarp for this cover is no longer available, since September of 2021.
As a result, you will have to replace the tonneau cover. The replacement model is the Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas, part # EX94430.... view full answer...