Individual parts from the Westin Installation Hardware Kit # 23-110PK referenced in your question are unfortunately not available from the manufacturer by themselves. If you need only one or a few of the included parts then you will need to obtain the entire kit.
This will at least give you spare parts for your Nerf Bars if anything else were to need replacement further down the line. This particular kit is designed to replace the mounting hardware for the Westin E-Series Round Nerf Bars... view full answer...
To replace the Velcro strips for the TruXedo Lo Pro Tonneau Cover # TX577601 on your 2008 Ford F-150 you just need the part # TX1115174. Just keep in mind that you will need to cut the strip down to size as it's technically made for the 6-1/2 foot bed. TruXedo does not offer a replacement Velcro kit specific to 5-1/2 foot beds so this is what you need.
The kit includes 2 Velcro Brand fasteners. I have attached a short video review that you can check out as well. view full answer...
You can still see well enough through the Aries Switchback Headache Rack # AA1110109 that it would not cause visibility issues when looking through the rear view mirror. The holes are big enough you can see anything you'd need to see through the back windshield. view full answer...
To get the replacement hardware for a Curt # 13355 hitch, you'll need the # RHK replacement hardware kit. Us the provided link, when you reach the product page, type '13355' into the provided field and choose 'Curt' from the drop down menu. view full answer...
If you have the newer Extang Trifecta 2.0 Soft Tonneau Cover part # EX92405 with the redesigned frame, hinges, and corners, then the Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover part # EX92405-20 is the one for you. view full answer...
We do have a selection of bunk boards available which you can use for a variety of lengths. Below are the different lengths we carry:
2' - # CE27850
3' - # CE27800
4' - # CE27810
5' - # CE27820
6' - # CE27840
7' - # CE27845
Since bunk board brackets can sit at different locations along the boat frame you'll just need to compare the different lengths to what you currently have and you'll be good to go! view full answer...
We did get one photo which I've attached. The replacement head you are seeking for your # RP66084 system is the Replacement Head for Reese Weight Distribution System - Trunnion Bar # RP58167. I've attached a video of this product to assist. view full answer...
For a replacement 7-way and 4-Pole Trailer Connector Socket w/ Mounting Bracket you would will need the part # HM40975. The 4' Pigtail mating connector and wiring harness # PK11998 serve as a bridge between your vehicle wiring and a 7-pole trailer connector. This harness will splice into your factory tow package. I have a linked video that shows at the 0:47 mark how to splice and connect the new harness. view full answer...
The correct Base Rails for Thule TracRac SR or G2 Sliding Truck Bed Ladder Racks for a 2018 Ford F-150 with 6-1/2' bed is part # TH21501. This would then give you the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-501. view full answer...
From what we have found there actually is no difference between the # 16900 and # C16901 aside from the cost. They are identical. The best choice is the one that has the lowest price. view full answer...
The correct replacement tarp for the TruXedo TruXport Soft, Roll-Up Tonneau Cover part # TX298101 on a 2013 Ford F-150 6.5 bed is the Replacement Tarp for TruXedo TruXport Soft, Roll-up Tonneau Cover part # TX2981-CVR. The serial number you provided will need to be entered before ordering. view full answer...
I think the lock core on your Sears Sport 20-SV cargo box is 009 which would then mean that the correct replacement key is part # THKEYN009. We've actually had a number of people talk about a 600 lock core number but there isn't actually a 600 key and when we told them the 009 worked they purchased it and it was the correct key for their application. view full answer...
The only way to correctly match up a replacement tarp for your Extang Blackmax tonneau cover is to find the part number; this is typically on the front rail or under the cover towards the front of the bed. Then you can match up a replacement cover or forward the part number to me and I will match up the replacement tarp for you. For example, if you happen to have part number EX2710 then you would go with Replacement Tarp for Extang BlackMax Soft Tonneau Cover - Black # EX1710 and if you... view full answer...
Without a part number it is difficult to find a replacement tarp for your tonneau cover. I recommend looking everywhere to verify what brand or model you have; typically the serial number is towards the front of the bed on the bottom side of the cover or sometimes it is on one of the rails.
I see you were looking at Truxedo covers in which case there are two different covers for your 2000 Ford F-150 6-1/2' bed (non-stepside). If you happen to have TruXedo TruXport Soft, Roll-Up Tonneau... view full answer...
Sure thing!
For your TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX597601, you're going to want the:
-Replacement Tarp for TruXedo Lo Pro Soft Tonneau Cover # TX577601-CVR.
This is just the cover like you needed and will require all the original hardware and rails for installation. view full answer...
The heads of the Equal-i-zer weight distribution systems are different based on the tongue weight rating of the system so you'd have to also replace the head with the part # EQ90-02-1400 with spring bars # EQ90-01-1499 to upgrade your system to a higher rated setup. view full answer...
Since you have a 1992 Ford F-150 that means your current TruXport tonneau cover is the TruXedo TruXport Soft, Roll-Up Tonneau Cover # TX238601. The correct replacement tarp for this cover is the Replacement Tarp for TruXedo TruXport Soft, Roll-up Tonneau Cover - Black # TX2386-CVR view full answer...
According to my contacts at Titan there are replacement parts available for the Titan Diamond HD Allow Snow Tire Chains # TC2524 snow chains.
A self tensioner is included with these tire chains, and an additional tensioner is not necessary. view full answer...
While it can be difficult to get started on these the two panels will slide into the Replacement Tail Hinge for Extang Solid Fold 2.0 Hard Tonneau Cover part # EX83475-64. Of course there is the seal to get out of the way so you can begin sliding the old hinge out. The sections have a round piece that will slide into the rounded opening of the hinge. view full answer...
Thanks for the info! I was able to use the serial number that you provided (D7686254) to find the correct replacement braking assemblies and hub/drum assemblies for your trailer. I have attached these for you below:
Dexter Electric Trailer Brake Assembly part # 23-451 (Right Hand)
Dexter Electric Trailer Brake Assembly part # 23-450 (Left Hand)
Dexter Trailer Hub and Drum Assembly part # K08-288-90 view full answer...