Correct Replacement Tarp and Rear Seal for TruXedo TruXport On 2013 Ford F-150 6.5 Bed

Question

Question:

Thanks for the info. I have located most things I need except for the seal that goes across the tail gate between the cover frame that holds the rear end of the cover and the top of the tail gate.

asked by: Brian J

0

Expert Reply:

The correct replacement tarp for the TruXedo TruXport Soft, Roll-Up Tonneau Cover part # TX298101 on a 2013 Ford F-150 6.5 bed is the Replacement Tarp for TruXedo TruXport Soft, Roll-up Tonneau Cover part # TX2981-CVR. The serial number you provided will need to be entered before ordering.

expert reply by: Conner L

0

Brian

6/8/2020

Thanks for the info. I have located most things I need except for the seal that goes across the tail gate between the cover frame that holds the rear end of the cover and the top of the tail gate.

Reply

Conner L.

6/8/2020

That should be the Replacement Rear Header Seal for TruXedo TruXport Tonneau Cover part # TX1705227.

Reply

Answer 1

You found the correct replacement tarp for your 2008 Ford F-150 5-1/2 foot bed as part #TX577601-CVR. The cover you have on your truck based on the year/make/model and bed length is the part #TX577601 so the #TX577601-CVR is correct for it.

view full answer...

Answer 2

For your tonneau cover #TX279101 the correct replacement tarp is the part #TX58FR that you referenced.

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 8

If you check out the attached picture you can see where you'll find the serial number and date code on your cover.

view full answer...

Answer 9

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Answer 10

For a hard folding tonneau cover that is rack compatible on your 2023 Ford F-150 I recommend the BAKFlip MX4 Hard Tonneau Cover. You will need one of the following based on your bed length: -BAKFlip MX4 #BAK76FR (5-1/2' bed) -BAKFlip MX4 #BAK46FR…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

Based on the information I could find the Samsung MR1031UWC is a countertop style microwave that is 20-11/32" wide, 13-11/32" tall and 14-5/8" deep. Currently we only have over the range and built in style microwaves. If your microwave…

view full answer...