We do have a replacement 7-Way for the 2002 Ford Expedition. You can use # C55774. The 4-Way wiring harness, # 118344 would be for a vehicle that did not come with any wiring harness. And # 118242, is a fit for certain model and year F-150 and F-250 trucks. view full answer...
Finding information on the Tie Down 46250 was not an easy task as it was discontinued awhile back. From what I could find, it looks like the calipers marked 46250 often times have to change the mounting bracket and rotor/hub in addition to the calipers. This means the DeeMaxx Disc Brake Caliper # DE86VR would not be an exact replacement and likely not compatible.
Your best option is going to be a full replacement like the Kodiak Disc Brake Kit part # K2R35D if you have a 3,500 lb. axle... view full answer...
The Yakima Sweetroll Kayak Carrier # Y04074 does not come with lock cores but you can add them with the Yakima Same Key System (SKS) Lock Cores # Y07204 (pack of 4). If you just need a single lock core replaced and it has A137 stamped on the body of the core, you can use the # Y8771-A137 as a replacement that will work with your current keys.
If you've got a different number stamped on the lock cores or your existing key, let me know what number you've got and I can help you locate the... view full answer...
For a 2 inch square axle you are going to want u-bolt plate # TRTP200175. The hole spacing on center is 2-5/8 inches by 2-3/8 inches. For matching u-bolts go with # SP01-160. They have a 9/16 inch diameter.
I have included a link to a video review for you for the u-bolts. view full answer...
For a replacement 7-Way for your 2001 Ford Expedition you can use # 74682 that you have referenced. You will just need to unplug the old 7-Way at the back. In your picture the grey plastic part on the connector is a sort of lock that needs to be pulled out to release the wiring harness from the connector. Just revers the process to install the new one. view full answer...
The Curt T-Connector Wiring Harness # C55384 is what provides your 2004 Ford Expedition with a 4-way connector by plugging directly into the 7-way harness that is included with the factory tow package.
If you only have a 4-way that is hard wired into the Expedition then I recommend cutting off the existing defective plug and hardwiring a new one with the Curt Wiring Harness # C58044. view full answer...
There isn't a harness similar to # 118247 that fits your 2005 Ford Expedition with 4-Way connector but I do have a solution that will allow you to add a 7-Way fairly easily and retain the use of the 4-Way as well.
You will need connector # 37185. The 4-Way you have will plug into this adapter. The white wire grounds to the vehicle frame. The other wires will connect to tow package wiring under the vehicle. Follow your 4-Way forward under the vehicle to where it connects to another harness.... view full answer...
For a 1999 Ford Expedition with factory-installed 7-way the replacement connector is part # A10-7072VP. For a combination 4-pole/7-way instead you could use # HM40975. Both connect with a round U.S. Car Connector like the one shown in the linked photo.
If the Expedition has no factory trailer wiring you can still have a 7-way. You will start with the plug-and-play 4-pole kit # 118344 which installs at your tail light connectors with no cutting or splicing. If you need only basic lighting... view full answer...
To replace the brackets on a Fastway e2 # FA94-00-1000 with round bars you will need the following parts:
Replacement Outer Link Plate for Fastway e2 Sway-Control Bracket # FA93-02-5350
Replacement Inner Link Plate for Fastway e2 Sway-Control Bracket # FA93-02-5200
Replacement Hardware Kit for Fastway Sway Control Brackets # FA92-02-9200 or bolt only with the Replacement Bolt for Fastway e2 Sway-Control Bracket # FA93-02-9270
Replacement Sway-Control L-Bracket for Fastway e2 Weight... view full answer...
We've found that approaching a brake controller install on a 2017 Ford Expedition with a factory 4-way is easiest if you just convert the 4-way to a 7-way with the part # ETBC7 since accessing the wiring that is only sometimes present on your vehicle for wiring a brake controller is pretty difficult to find.
So you'd want a brake controller like our best selling and performing P3 part # 90195 and the # 22292 to power and provide the brake signal and then you'd use the wiring of the # ETBC7... view full answer...
Yes, for the Electric Jack w/ Footplate # EJ-3520-BBX, we do have the Replacement Light Board for etrailer Electric Jack # EJ-3520-LT. view full answer...
The Curt MV Weight Distribution System part # C17062 is composed of the following parts:
Curt Spring Bar Retainer Package for Round Bar Style Weight Distribution part # 17109
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000 lbs part # A-6
Replacement Lift Handle for Curt Weight Distribution Systems part # C17112
Replacement Lift Bracket for Curt Weight Distribution Systems part # C17008
Replacement Bolt Kit for Curt MV Weight Distribution Systems part # C17076
Curt... view full answer...
If you have the Westin Bull Bar # 32-0245 or # 32-0240, then you will want the Replacement Bracket Kit for Westin Bull Bar 32-0240 # 32-024PK. Bull Bars are not a universal fit, so you will need to make sure you have the correct one or it will not fit your Expedition. view full answer...
You are correct. The Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear # LC146059 is the correct kit for your Venture VMC900 landing gear. view full answer...
For great front floor mats that will complement your tan interior of your 2004 Eddie Bauer Ford Expedition is the WeatherTech Front Auto Floor Mats - Tan # WT450291. These mats are custom-designed to fit the exact contours of your Expedition and come with the WeatherTech lifetime warranty. To top it all off, they are 100% made in the U.S.A. view full answer...
As long as the bull bar was specifically designed to fit a 2001 Ford Expedition like the Westin Ultimate Bull Bar with Skid Plate Chrome part # 32-0240 or the Westin Ultimate Bull Bar with Skid Plate Black part # 32-0245, then the correct replacement mounting bracket kit is the Replacement Bracket Kit for Westin Bull Bar part # 32-024PK. view full answer...
Using spring bars that are rated for a higher capacity can lead to a rigid trailer ride. An over-rated weight rating on your spring bars can even cause bounce leading to traction issues with the trailer.
I definitely recommend getting the spring bars that are rated for your specific trailer and vehicle using the total tongue weight. The total tongue weight is the loaded trailer tongue weight along with any cargo weight behind the rear axle of the tow vehicle. That weight combination... view full answer...
For your 2020 Ford Expedition the SumoSprings kit part # CSS-1168 is the best solution for rear suspension enhancement. This will work great with your weight distribution setup as well. view full answer...
We have a few different clip options that are possible fits for your Weight Distribution (WD) system.
Fastway WD - FA94-02-1059
Curt WD - 17109
From the picture that you sent me, I believe that the Curt clips # 17109 are the correct replacement clips for you. view full answer...
We have surge actuator couplers for drum-type brakes for both straight-tongue trailers and for a-frame trailers, for all three sizes of hitch ball and with or without a reverse lockout feature. We also have bolt-on and weld-on couplers. All such items are shown on the linked page and you can click on the filters to narrow the range of products shown to just those with your preferred characteristics.
You will want to select your actuator coupler based on the trailer's gross weight rating... view full answer...
Go To Results