Yes, the Curt trailer hitch, # C13105, will fit all models of the 2014 Toyota Sienna including all wheel drive models. I have included a link to a video that shows a typical installation for you. Sounds like you are talking about the rear fascia that needs to be trimmed.
If you plan on doing some towing, I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, hitch pin and clip, and a carrying bag. For trailer wiring use # 118498. I have... view full answer...
As long as your Toyota Sienna hitch is rated for weight distribution like the etrailer part # e98837 is and it has a set of higher weight capacities when used with a WD system what you are wanting to do is possible. This particular hitch has a 5,000 lb trailer and 500 lb tongue weight capacity when used with a WD system.
Then for a weight distribution system the Reese part # RE34FR would be a great option that has a tongue weight range of 200 to 600 lbs like what your trailer would need. view full answer...
I'd be happy to help with that.
Let's begin with the hitch. For the most concealment/ground clearance I'd recommend the Curt class III hitch, part # C13343. This hitch will be mostly concealed, with the crossbar being hidden behind the bumper/fascia. The only visible portion of the hitch will be the receiver tube and the safety chain loops.
For a 4-pole trailer wiring harness, I'd recommend the Tekonsha # 118648. You'll also need a ball mount. The average leveled height of a trailer... view full answer...
It may be possible to use a weight distribution hitch with the side mounted jack on your Coachmen Clipper Classic 1270ST Pop Up Camper, but it will depend where it is located.
Based on the pictures of trailers similar to yours that I was able to find it appears your trailer has an A-Frame. If that is the case then installing an A-Frame jack like the # TJA-5000S-B if it has the center jack mounting hole.
If your side mount jack is just bolted on and can be moved then moving it as far back... view full answer...
Your roof racks factory weight limit is 150lbs. You should not have any problems carrying kayaks on the roof of your 2016 Toyota Sienna due to their weight. Your kayak carriers will need to be able to attach to a factory rack. I recommend the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs - J-Style - Folding - Side Loading, part # S512-S512X. It is a j-style carrier that can be adjusted to carry to kayaks like a stacker, or to a more traditional j-style rack if you need to carry just one kayak... view full answer...
The etrailer hitch part # e98853 is the best trailer hitch option for your 2017 Toyota Sienna as it's mostly hidden, has the best towing capacities, and has a matte finish which makes it a little less visible as well. I attached an install video for more info for you to check out as well. view full answer...
The Dexter trailer hub part # 8-257-5UC3 is the correct fit for the 2,000 lb axle you have on your trailer and has the correct wheel bolt pattern as well. Then for the correct brake assemblies you'd need the part # 23-47 for the left hand side and part # 23-48 for the right hand side. This setup is also compatible with 13 inch wheels like you have as well. view full answer...
We have exactly what you need to add a brake controller and wiring to your 2022 Toyota Sienna.
For a brake controller I recommend the Redarc Tow-Pro Elite # RED44FR because it not only is a great controller, but it also installs out of the way and has a small knob that you use to adjust settings. Since space is typically limited in and around the dash of minivans nowadays the mounting convenience is invaluable.
For wiring you need to start off with a 4-Way # TK69FR for the standard light... view full answer...
The rack I recommend that is a confirmed fit for your 2011 Toyota Sienna and 1998 Toyota RAV4 is the Thule Apex Swing 4 Bike Carrier part # TH9027XT. Not only does this rack have every feature on most standard racks like anti-sway cradles, arced arms, anti-rattle locking hitch pin, and integrated cable lock it also has the ability to swing away from your vehicle with bikes loaded to give you complete rear cargo access on your vehicles whenever needed. This rack will have plenty of clearance... view full answer...
For the best options for a 4-way flat trailer wiring harness and trailer hitch receiver for your 2022 Toyota Sienna, here is exactly what you'll need:
- etrailer Trailer Hitch Receiver # e56RR
- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK69FR
The # e56RR has the best ground and bumper clearances for your '22 Sienna, allowing the easiest use of a ball mount or accessory while also keeping them safe from ground contact. Then for the wiring harness, we have found... view full answer...
For your 2021 Toyota Sienna we have the Draw Tite Class III hitch part # DT55MR that has the highest towing capacities of 4,500 lbs trailer weight and 675 lbs tongue weight. view full answer...
My hitch receiver recommendation for your 2022 Toyota Sienna is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # C22UR. It has a maximum tongue weight of 350 lbs and a maximum gross trailer weight of 3,500 lbs. It comes with a gloss power coated finish to resist rust and corrosion. The installation is bolt on, no welding required.
I also recommend that you get your vehicle ready to tow by adding the necessary wiring. Adding the T-One Vehicle Wiring Harness with 4-Pole... view full answer...
For your 2013 Toyota Sienna the most popular 2 inch hitch is # C13105. This is a Class III hitch rated for 350 pounds tongue weight. I have included a link to a video showing how this hitch installs for you.
It sounds like you might have a Kuat NV, # NV22G.With a bike loaded and the rack tilted we could not open the rear hatch all the way but every bike is different so its still possible.
Also you need to know that there are only certain bike racks that are rated for the extra stress... view full answer...
For your 2020 Toyota Sienna I highly recommend the Draw-Tite Class III Max Frame Receiver Hitch # 76112. This Class III hitch features the hidden-crosstube design you're wanting (see attached images) and unlike the other hidden options available, it is rated for use with a weight distribution system.
The hitch itself features a 3,500 pound towing weight capacity and a 525 pound tongue weight limit. All the necessary hardware is included.
If you plan on doing some light towing you will... view full answer...
I recommend the Firestone Coil Rite, # F4155 for your 2022 Toyota Sienna. Firestone is known to have higher quality air bags than the competition and this kit easily installs by slipping into the coil spring on your Sienna. This will allow you to inflate the air bags as needed to compensate for loads but have "normal" ride quality when not heavily loaded and have tongue weight from a trailer.
Please note the linked product review and installation videos below. view full answer...
I would be happy to recommend a brake controller so you can safely get to your camping destination with your 2018 Jayco Sport 10SD. I do have a few questions first though to make sure that we get you exactly what you're looking for.
If you can get me the year/make/model of your tow vehicle and whether it has a factory trailer connector or not that would be huge so I can make sure I include all of the parts you would need. Also, is this the only trailer that you tow, and are you wanting... view full answer...
I have a good solution but the Curt Roof Rack for Raised Side Rails part # C18118 does not have a usable t -slot instead the Malone AirFlow2 Roof Rack part # MPG216 is the way to go. These will allow for the use of the Rhino-Rack Sunseeker Awning part # RR31132. view full answer...
For your 2006 Toyota Sienna the Curt Hitch part # C13105 would be the hitch I would recommend for you. It would do well for carrying the Hollywood Racks Bike Rack part # HR1400Z that you have and it costs considerably less. Basically the hitch is VERY similar to the other hitches except it costs less.
I attached an install video for you to check out as well. view full answer...
It sounds like you are looking for a trailer hitch for your 2015 Toyota Sienna. For this, I recommend the Draw-Tite Class III Max Frame Round Tube Receiver Hitch # 75237. This Class III hitch is confirmed to fit your Sienna and it will use existing holes in the vehicle's frame for a no-drill installation. This will provide you with a 2 inch receiver that will work great for hitch-mounted accessories like bike racks or cargo carriers.
I have attached an installation video on your vehicle... view full answer...
Yes kids bikes can fit on the Swagman Upright bike rack part # S64720 that you referenced. The two sizes you mentioned would fit perfectly. view full answer...
Go To Results