We do offer mount and winch that would work well with your Moose manual lift plow.
I'd recommend the # BDW15102 Bulldog winch mount and the 2000 lb capacity Bulldog winch, part # BDW15001. The winch would also be good for recovery work when the plow isn't attached. view full answer...
We have the custom winch mount part # BDW15182 which is a fit for your 2016 Polaris RZR XP 4 turbo that you can then use with the synthetic rope Superwinch Terra ATV Winch # SW1145230. view full answer...
Yes, the Badlands winch mounting pattern is compatible with the winch plate part # BDW15151 that is also listed as a fit for your 2014 Polaris 400 Sportsman.
I spoke to my contact at Bulldog Winch and he told me that their winch mount that you referenced was designed to fit the standard winch mounting bolt pattern dimensions of 10 inch wide by 4-1/2 inches deep.
He said they know this will work with the more popular brands of winches like Superwinch and Badlands. view full answer...
The correct Bulldog Winch Mount for your 2015 Polaris 570 Sportsman is actually the part # BDW15151 and not the part # BDW20056 that you mentioned. view full answer...
For Superwinch ATV winch # SW1125220 you will need mount kit # BDW15151 to install it on your 2014 Polaris Sportsman 550. The fairlead is included with the winch. If you already have the winch but need just the fairlead I recommend # BDW20055. view full answer...
I would recommend a larger lift and as long of a ramp as you can. Since your Polaris Slingshot SL is 150 ish inches long so these ramps # RR-TR-11-2 are your best option! These ramps are 136-7/8 inches long and have the highest lift so you don't have to worry about you bottoming out. It seems like your Aluma 8218 doesn't sit too high so the 11" lift will get you right up there. You can put the ramps under the trailer and tilt it back a little bit since there is a little lip for your trailer... view full answer...
After consulting Superwinch I can recommend the ATV Mount # BDW15157 you referenced for your 2000 Polaris 500 Sportsman. It is a custom-fit winch mounting plate compatible with your ATV with all mounting brackets, hardware, and instructions included.
To use this mount for your ATV, you may need to mount your roller fairlead to the double-tube bumper or remove the bumper depending on the configuration of the bumper on your Sportsman 500. A co-worker here has a winch mounted on a 2002 Polaris... view full answer...
For your 2014 Polaris Ranger Crew the correct custom mount for installing the Superwinch part # SW1145220 is the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15174. view full answer...
Yes, I checked with our contact at Bulldog Winch and the Winch Mounting Kit # BDW15151 will work with your LT2500 Superwinch and will work on your 2012 Polaris 500 HO Sportsman. view full answer...
For your 2011 Polaris Ranger RZR 900 XP the correct winch mount is the part # BDW15167 which then will work well with the Superwinch LT3000 part # SW1130220 that you also mentioned. view full answer...
If your 2007 Polaris 500 Sportsman is a 4x4 you would need the Bulldog Winch Mount # BDW15159. If you have the 4x4 X2 2-UP this is also the correct mount. If you have the 6x6, then you will instead use the Bulldog Winch Mount # BDW15157 for the custom fit.
For the winch, I recommend the Bulldog Winch Powersports Series ATV Winch - Wire Rope - Roller Fairlead - 3,000 lbs # BDW15002. This is a customer favorite that will give you the power and performance you desire. I've attached a... view full answer...
We have the Bulldog Winch Mount part # BDW15167 which is a confirmed fit for your 2013 Polaris RXR-4 XP 900.
You could use it with the part # BDW15001. view full answer...
For the 2015 Polaris Sportsman ETX the mount you'd want is the part # BDW15151 for the Superwinch ATV winch part # SW1130220 that you referenced. This comes with all needed hardware so nothing else would be needed. view full answer...
It would be too small diameter-wise to replace a 145/80/12 with a 4.80-12.
Instead you would need the part # AM10140 for just a tire in the correct size that would work well for you. view full answer...
For a weight distribution system that would have a tongue weight range that fits between 400 and 700 lbs the part # RP66541 would be the best option. It has a tongue weight range of 400 to 800.
You should note that you will have to set the system for each of the tongue weights that the trailer will see so that it works properly.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286. For additional frame brackets you would need the part # RP6637. For chains you... view full answer...
For a winch mount that has been confirmed as a fit for your 2006 Polaris Ranger 500 4x4 you'd want the part # BDW15111 which is a confirmed custom fit. view full answer...
Yes, you can install Superwinch ATV/UTV winch # SW1135220 on your 2015 Polaris RZR 900. You just need the proper mount kit for the UTV. I recommend custom mount kit # BDW15182. The winch fits the mount kit and the mount kit fits your RZR! I have linked a video review of the mount kit for you. view full answer...
Yes, we do offer a winch mount that has been confirmed to fit your 2014 Polaris Ranger 570 that would work great with the Superwinch LT3000ATV Winch # SW1130220 that you referenced.
You would want the part # SW1130220 as this has been confirmed to fit your UTV. view full answer...
The 1/2 inch difference in rim width would not matter. For a spare tire I would recommend the part # TA82MR as it is the same size tire you have of ST205/75R14, is a radial like your current tires, and has the matching bolt pattern wheel you need.
I attached a review video for this wheel and tire for you to check out as well. view full answer...
The Curt Multipurpose Ball Mount, # D210, is designed to fit in a 2 inch receiver and then provide a ball mount and a separate 2 inch receiver that can be used together. If your Polaris Sportsman has a 2 inch receiver, you can use the ball mount.
Many ATV/UTVs have a smaller receiver opening like a 1-1/4 inch or smaller in some cases. If you have a 1-1/4 inch receiver and need to go up to a 2 inch, you would need an adapter like # HTAD. However, when you use an adapter like this, the tongue... view full answer...