I recommend going with the etrailer.com Trailer Hitch Receiver # E98856 for your 2019 Jeep Wrangler because it has a longer receiver portion (for more clearance) and a matte black finish that helps hide scratches much better than the glossy finish that is popular with other trailer hitches.
When we installed this on a 2018 Jeep JL Wrangler Unlimited we found that from the center of the hitch pin hole to the outermost part of the bumper measured 2-1/2" (see attached installation video).... view full answer...
For your 2001 Jeep Wrangler with a stock bumper the best base plate kit is the Roadmaster part # RM-521424-5 which is the easiest to use and has the removable arm design like you are wanting.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For... view full answer...
I recently asked Demco about brakes pulsing with the install of the Demco SBS Stay in Play part # SM99251 and they said this was normal if the sensitivity was cranked up too high and near the max setting. Have you set the sensitivity setting of your setup yet. view full answer...
The dual hitch adapter we carry with the highest tongue weight capacity is the Roadmaster Dual Hitch Receiver Adapter part # RM-077-6 for 6" rise or part # RM-077-8 for 8" rise. They both have a 400 lb tongue weight capacity.
Please note that this adapter is designed for flat towing only. If you can give me a better idea of what you are using the adapter for we may have alternative options if the above will not work. view full answer...
For your 2016 Jeep Wrangler I really like the rugged and durable look of the Rampage Mass Articulation Front Recovery Bumper # RA88509. The bumper features D-rings to let you perform recovery operations, a winch plate for simple winch mounting, and integrated receptacles to let you relocate your factory fog lights if you want to.
None of our aftermarket bumpers including the Rampage Mass Articulation Bumper are designed to be attached directly to a tow bar for flat towing applications,... view full answer...
Yes, the Jeep Wrangler (1997-2021) is the most popular flat tow vehicle among RVers. Thanks to its modest size, the Wrangler is a great option to pull behind both Class A and Class C motorhomes. The Wrangler has no speed or distance restrictions when being flat towed. Plus, both manual and automatic transmission models can be safely towed.
First with the base plates, I suggest the Roadmaster EZ5, # RM-521424-5 if you have either a U-channel bumper or a double tube bumper. If you have... view full answer...
Demco has a base plate kit that fits your 1998 Jeep Wrangler with the part # DM9519045 but the part number you mentioned is for newer generations of the Jeep Wranglers. view full answer...
All in one packages for flat towing are coming soon but in the mean time I can tell you all of the individual parts you will need to flat tow your 2015 Jeep Wrangler Sport. It is a lot of information to go through so don't hesitate to ask any follow-up questions.
The first thing you will need is a set of base plates. The base plates will mount to the front of your Jeep and provide a safe and proper attachment point for a tow bar. Since your Jeep has the standard bumper you can use Roadmaster... view full answer...
The easiest solution for tow bar wiring that fits your 2012 Jeep Wrangler is the plug and play Hopkins kit part # HM56200 which installs easily by plugging inline with the taillight connectors of your vehicle and then gives you a 4-way connector you'll route to the front of the vehicle. No wire splicing or light socket cutting required unlike other options. I attached an install video that will walk you through the install process for you to check out as well. It also would work just fine... view full answer...
For tow bar lighting for your 2017 Jeep Wrangler you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV where it plugs into the trailer connector of it. Once this connection... view full answer...
Absolutely!
For your 2017 Jeep Wrangler I recommend the Yakima JetStream Roof Rack System. This roof rack consists of a set of 50 inch JetStream Crossbars # Y00425 , the SkyLine Towers # Y53TR, and the Landing Pad 6 # Y00226.
This will provide you with a great looking roof rack with lightweight aluminum bars that will cut through the wind for a nice, quiet ride. The system features a 165 pound weight capacity and because Yakima actually installs their racks onto vehicles before confirming... view full answer...
I spoke with my contact at Demco regarding the Tabless Base Plate Kit # DM9519292 for your Jeep Wrangler and existing Demco Tow Bar.
My contact says it sounds like you have the Demco Commander Tow Bar, which features the smaller mounting holes that you mentioned. The base plate kit you purchased actually includes all the pieces you need to adapt them to this tow bar so a separate clevis or adapter is not needed. At the top of page 6 in the installation instructions it walks through how... view full answer...
For a spare tire cover that will fit the 255/70-18 tire on your 2010 Jeep Wrangler I recommend using either the Rampage Display Spare Tire Cover part # RA783235 or the Rampage Spare Tire Cover for Jeep part # RA773215. They are both made out of a 19-oz Jeep soft top fabric which will do an excellent job of protecting your tire from uv rays which should be your utmost concern.
I have attached a photo of the latter installed for you. view full answer...
Yes, the Roadmaster InvisiBrake Supplemental Braking System # RM-8700 referenced in your question will fit and work well with your 2006 Jeep Wrangler Unlimited. This is a really nice system that will give you real-time braking in the Wrangler. The actuator box installs permanently so there is no need for removal or adjustments as you transition from flat towing to everyday driving with the Jeep (and vice versa).
I have attached an installation video on a later model Jeep Wrangler that... view full answer...
To use a D-ring adapter like the RM-035-01 you need to use a Roadmaster tow bar that attaches to the tow vehicle by inserting into the trailer hitch like the Falcon All Terrain # RM-522.
I also attached a link to a page that has all of the tow bars that would work as well. view full answer...
I would be happy to recommend everything you will need to flat tow your 2021 Jeep Wrangler behind your Airstream Atlas with a vehicle mount tow bar.
Starting with the base plate kit I recommend the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # RM-521453-4 which will fit your Jeep as long as you have the factory steel or plastic front bumper. This base plate kit will pair up perfectly with the Roadmaster StowMaster Tow Bar - Car Mount - 2" Ball - 6,000 lbs # RM-501 which will... view full answer...
We've checked with Blue Ox and the base plate kit part # BX1139 is a confirmed fit for your 2020 Jeep Wrangler so it would work great with your Blue Ox tow bar like the # BX7420.
The Demco Air Force One part # SM99243 is a great choice for braking as well.
For lighting the Roadmaster kit part # RM-15267 is a great choice that splices into your taillight wiring and allows your motorhome to operate your Jeep taillights when flat towed. I attached an install video link to this page for... view full answer...
The only base plate kit solution we have that will work with your Curt tow bar part # C19745 is going to be if you use a Blue Ox base plate kit like the # BX1118 with the Blue Ox adapter # BX8833.
We don't have any other adapter solutions that will work with your Curt tow bar. view full answer...
The Saris Bones Hitch Mount Tilting Rack # SA883 is a basic 3 bike rack that will give you 9-1/2" from the center of the hitch pin hole to the upright bar. If you have a spare tire on the back, you will want to check this measurement. This rack has anti-sway straps. It doe not come with locks, so I recommend getting a cable lock like # e98891 to secure your bikes. This rack also comes with an anti-rattle pin.
With hanging bike racks, I recommend using an adapter bar like the Swagman... view full answer...
Blue Ox makes a base plate kit that fits your 2005 Jeep Wrangler with a standard bumper with the part # BX1120 which will work great with your Blue Ox tow bar.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed... view full answer...
Go To Results