Weight distribution/sway control (WD/SC) set-ups are needed in several circumstances, such as when the trailer's weight is more than half of the tow vehicle weight. This is surely the case for your trailer and vehicle combination so a WD/SC system will definitely improve your trailering experience by taking away some of the vehicle rear-end sag and trailer sway.
The key to choosing the correct system is knowing the total effective tongue weight (TW) of the setup. This total TW is the combination... view full answer...
Absolutely!
To install a 7-way connector on your 1990 Isuzu NPR you will first need to install a 4-way connector. Since there is not a custom 4-way connector harness you will need to use the Upgraded Modulite Vehicle Wiring Harness Kit # C59236 which includes a circuit tester to verify the functions of your factory wiring to make sure you make the correct connections.
The 4-way connector will wire as follows:
White wire to the vehicles frame
Red wire to brake light
Green wire to passenger... view full answer...
Bearing measurements have to be as precise as possible so if you are not using dial or digital calipers you will want to get some. But that is only if you cannot read the bearing number on the outer bearing. It should be stamped into the metal of the bearing.
The diameter of the Bearing Buddies is its outer diameter where it fits into the end of the hub. It is actually slightly larger than the opening because you need a very tight fit. If your outer bearing number is # LM-11949 then you... view full answer...
The closest trailer tire size to the 155/13 that you have would be the ST175/80-13 like the part # AM10210. This will be a little bit wider but it will still fit. This will be 20 mm wider than what you have now. view full answer...
From what I can find online the wheel bolt is a M12-1.5 inches long. The lug nut wrench needed is 21mm. We have one lug wrench to work well with your application. I recommend the Powerbuilt Billy Club Lug Wrench # ALL642250 which will come with the 21mm socket. view full answer...
While we have suspension enhancement that fits your 2015 Isuzu N-Series Freezer Truck like the SuperSprings part # SSA39 nothing we offer can officially increase the towing capacity of your truck. The # SSA39 can give you and additional 3,300 lbs of suspension support but since a vehicle's towing capacity is more than just the leaf spring capacity it doesn't increase the overall capacity of the truck. view full answer...
Although it isn't an exact match from the pictures you showed me, the Bargman LED Clearance/Side Marker Light - 59 Series # 47-59-002 is the closest we have and it does fit the same measurements. It's a 4 inches by 2 inches amber marker or clearance light with a white base. Also, the mounting holes are 3 inches apart, however on this light they are covered by the lens. It does not use the same plug in connector like your old light but instead will hardwire into your trailer's wiring. view full answer...
To install a new, fully functional 7-Way connector on your 2002 Isuzu NPR you will need to start by hardwiring a 4-Way harness. There are not any plug-and-play harnesses available for your particular truck.
If your truck has turn signals and brake lights that run on the same bulbs then I recommend the Tekonsha # 18252. If the turn and brake signals are on separate bulbs then you will use the Tekonsha # 119178KIT instead. This kit includes the converter that is needed to combine the circuits... view full answer...
Do you know the diameter of the holes on the D-Ring mounts that are on the bumper? If so then you could use Blue Ox adapter such as # BX88296 for 7/8 inch diameter if that is the hole size.
There are also options for 3/4 inch D-Rings # RM-035 or 1 inch rings # RM-035-1 but you would then have to use a Roadmaster tow bar such as the Falcon 2 # RM-520. If you go with the Roadmaster set up then the tow bar does not come with safety cables like the Blue Ox Aventa LX does. So for safety cables... view full answer...
The Thule Spare Me 2 Bike Rack part # TH963PRO can absolutely be used with the rear spare tire on your 1998 Isuzu Trooper and it will not break off if installed properly. This is actually exactly what this bike rack is designed for. It comes with multiple different adapters for vehicles with offset spare tires, odd bolt patterns, and different size spare tires. It is truly the most versatile spare tire bike rack carrier available. It is also very sturdy and works with virtually any bike... view full answer...
The Universal Wiring Kit # ETBC7 that you referenced is indeed what you need to install a fully functional 7-Way on your 1996 Isuzu Trooper so that you can install the Tekonsha Prodigy P2 Brake Controller # 90885 to power the trailer's electric brakes. It is okay that the wire colors for the included 7-Way connector do not match up to the wire colors used on your trailer. The pins on the connector will still match up to the pins on the trailer's 7-Way connector with regards to function.... view full answer...
You will need to start with a 4-way (if you do not have one). For that you would want the # 119250KIT.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling... view full answer...
Since the spare tire of your 2004 Isuzu Rodeo is mounted under your vehicle you would want the Curt Hitch part # C13222. Check out the install video I attached.
The part # C13235 that you referenced is designed for the Rodeos with door mounted spares.
For trailer wiring you would want the Tow Ready Harness part # 118360. Install video attached.
For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. view full answer...
The SportRack Semi-Custom Roof Rack # SR1002 that you referenced is confirmed to fit your 1996 Isuzu Trooper so it would work well.
For a light bar that is confirmed to fit your vehicle as well you would want the Carr Deluxe Rota Light Bar # CARR210871. view full answer...
There is a Surco Safari roof rack option that I can recommend for your 1994 Isuzu Trooper with raised siderails, but the part # SPS4550-1101 is not it.
Instead you would want the adapter part # SPSTR100 and Surco basket part # SPS5060 and you would have everything you would need to install a roof cargo basket on your vehicle. view full answer...
For your 2002 Isuzu Trooper, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75043 is a confirmed fit. It is an easy bolt-on installation, so no welding is needed. It comes with the hardware needed. If you have a little mechanical ability, a couple sockets, and some jack stands or ramps you will be able to do the install yourself. For a slightly easier installation, I recommend going with the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #... view full answer...
Your 1996 Isuzu NPR will need to have a trailer wiring harness and brake controller hardwired in. If the truck has the turn signals and brake lights on the same bulbs then the first thing you will need is a 4-Way, # 18252. If the truck has turn signals and brake lights on separate bulbs then use # 119178KIT.
Then to add a 7-Way and the provisions to install a brake controller you will need installation kit # ETBC7. I have included some links that show and explain the ETBC7 installation.... view full answer...
For your 2007 Isuzu NQR and 2011 Isuzu NPR you will need either the Universal 4-Way # C59496 or Universal 7-Way # 22551 depending on the trailer you plan on towing. The 7-way allows you to add a Trailer Brake Controller # 90195 if you have a trailer with electric brakes. view full answer...
There are only 1-1/4 inch hitches available for your 1999 Isuzu Oasis. 2 inch hitches are reserved for higher capacity vehicles like trucks and SUVs.
There are bike racks and cargo carriers that fit the smaller hitch size though.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and this one showed up in nearly everyone's top three.... view full answer...
For your 2002 Isuzu Trooper we have the Inno Roof Rack part numbers # INB127, # INSUT, and # INK115 which is a confirmed fit and is our best price option too. This would be your best option. view full answer...