You have many options for a 2-bike trunk-mount carrier for use on your 2008 Infiniti FX35. The link provided will take you to our main page that shows all compatible 2-bike hanging-style carriers. If you wish you can use the filters at left to narrow the product results to just those items with the features and characteristics you prefer.
If you want a premium carrier that includes locks I suggest the Thule OutWay 2, part # TH45JV. This carrier features the patented Thule FitDial system... view full answer...
I have a trailer wiring solution for your 2005 Infiniti FX35 that does not require any hardwiring or splicing but we do not have any plug and play install kits.
Instead you'd want the ZCI part # 119250KIT. This uses sensors over the taillight wiring to get the circuits needed instead of requiring wires get cut. view full answer...
I recommend the hitch mounted bike rack, Thule Hitching Post Pro # TH934XTR, for your 2008 Infiniti FX35. This is one of the most valuable and user friendly bike racks in the industry and is durable during long road trips. The rack can hold up to 4 bikes and prevents contact with your vehicle. It also can fold down for easy storage, or tilt down for easy access to your trunk when the rack is on your vehicle.
I recommend a hitch mounted rack over a roof mounted rack for you because hitch... view full answer...
The correct ClearPlus rear windshield wiper you'd need for your 2005 Infiniti FX35 is the part # CP18142. This is the correct 14 inch size that is recommended for your vehicle. view full answer...
Between the bike racks that you mentioned, Thule T2 Pro XTR # TH83JV, the Kuat NV 2.0 # NV22G, and the Yakima HoldUp Bike Rack # Y02443, I recommend the Yakima HoldUp rack because it fits you application the best.
The Yakima bike rack can carry a wheel diameter between 14-29 inches. Being able to carry a tire as low as 14 inches will allow to carry the smaller child's bikes. Kuat and Thule have a 20 inch minimum on their wheel diameter. Also, the when folded up the Yakima rack measures... view full answer...
For your 2011 Infiniti FX35 the Curt Hitch part # 13554 is the correct hitch. For trailer wiring you would also need the Curt Harness part # C56074 since it is not included with the hitch.
I attached an install video for the hitch for you to check out as well.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a... view full answer...
Thule has tested the OutWay # TH45JV, and the Passage # TH910XT bike racks you mentioned on a 2012 Infiniti FX35 and has found that the bike racks are compatible with the spoiler.
Of all the racks, I'd recommend the OutWay because of how ridiculously simple it is to install and remove from the vehicle. The rack features only 2 ratcheting cables that adjust with the turn of a knob to fit your vehicle perfectly. When compared to the usual mounting method which involves 6 straps and a series... view full answer...
The Thule Passage 2, part # TH910XT is a compatible fit with the 2010 Infiniti FX35.
While the Passage is installed, it's not recommended to open the rear hatch as this can cause the straps to loosen or shift, and create an unsafe situation.
Initially, the Passage doesn't have any security features equipped on it. You can add a security strap for the rack with part # TH533 and a cable lock like part # e98891 for security.
Since you have alternative frame bikes, you'll need a frame... view full answer...
For two wire systems like your 2008 Inifiniti FX45 Tekonsha says to wire up the ZCI kit part # 119250KIT to the vehicle wiring by using the yellow wire ran to the left turn/brake signal wire, the green to the right turn/brake wire, and the brown to either of the tail light/headlight circuits.
You didn't mention exactly how you wired your vehicle to the system but I'd verify that you wired it all up like that. view full answer...
The Thule OutWay 2-Bike Rack # TH45JV that you referenced is a great option for your car, and is actually one of my top recommendations since it is lightweight - about 18-lbs - and since it includes locks for both your bikes and for the rack itself. I also like it because it has a superior atachment attachment system. This trunk rack is perfect for carrying 2 bikes on your sedan, station wagon, or SUV. It attaches easily with 2 rubber-coated straps that let you raise your trunk or hatch... view full answer...
No, the Hidden Hitch HH87639 is not compatible with your 2006 Infinity FX35. I do however, have a hitch that is compatible with your vehicle. It is the 2006 Infiniti FX35 Curt Trailer Hitch Receiver Class III - 2 inch # 13558. I've attached an installation video of this hitch on the same year/make/model for you.
If you will be using this trailer hitch receiver to tow a trailer, you will also need a ball mount and wiring. For your wiring needs, I recommend the ZCI Circuit Protected... view full answer...
Adding a trailer hitch to your 2004 Infiniti FX35 to accommodate a Thule bike rack will absolutely work. I recommend going with Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13558. This will be tucked neatly under the bumper of your vehicle, providing a clean look while preventing anyone from hitting their leg on it. Curt does require Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories # 18050 to be used on non-trailered loads, such as a bike rack.
The installation... view full answer...
It sounds like you are looking for a trailer adapter for a vehicle with lamp out sensors for your 2008 Infiniti FX35.
If that is the case I recommend the 7-Way to 4-Way/5-Way Trailer Adapter for Vehicles with Lamp-Out Sensors # C35FR if your trailer has a 4-way or 5-way connector, or the Trailer Connector Adapter w/ Lamp-Out Sensor Bypass # 20142 if your trailer has a 7-way connector.
These sensors are commonly needed on German vehicles with lamp out sensors, or newer domestic vehicles... view full answer...
The nicest trunk mounted bike rack we offer that has been confirmed as a fit for your 2012 Infiniti FX35 is the Thule OutWay part # TH45JV.
What makes this rack far superior to the others is the attachment system. It uses only 2 retractable coated steel cables to attach to the vehicle rather than the 4-6 nylon straps like other racks. This makes installation quick and easy and the cables also last longer.
The cables store inside the rack so there are no loose straps ends to flap around.... view full answer...
The Yakima SkyBox 18, # Y07336, measures 92 inches long. Chances are that the box will either overhang the roof or make contact with the rear hatch or both on your 2008 Infiniti FX-35. If your crossbars are adjustable and you can move them forward, and then adjust the box to be more forward, it can probably clear the rear hatch but will most likely overhang in the front.
What I recommend is a slightly smaller box, in terms of cubic feet. Take a look at the RocketBox Pro 14, # Y07192. This... view full answer...
The recommended ball mount for the Curt Class III Trailer Hitch Receiver, # 13558, on your 2006 Infiniti FX-35 is # 2753. If it is too low in the standard drop position, it can be flipped over and used in the rise position. You will get a maximum rise of 2-3/4 inches.
If 2-3/4 inches is not a high enough rise for a level trailer, you can find one that will on our ball mount page. I have provided a link to all the 2 inch, standard, fixed ball mounts below. I have also included an FAQ article... view full answer...
For your 2005 Infinity FX35 with a 4-way connector, you will need to get a brake controller and wiring to make a 7-way function correctly. I recommend the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires # ETBC7. This kit will give you all the wiring, connectors, and circuit breakers you need to make your 4-way into a 7-way connector. I've attached a video to help.
For a brake controller, I recommend the Tekonsha Prodigy P3 # 90195.... view full answer...
For your 2006 Infinity FX35, we have the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit # 119250KIT. This is a confirmed fit that uses zero contact interface sensors to capture the signal in the factory wiring to transfer it to your trailer wiring connection. This harness will give you a 4-way flat connection.
If you want to add a 7-way, the only way to do so is to use the # ETBC7 kit along with this 4-way to hardwire those... view full answer...
Go To Results