The Valterra Water Inlet part # A01-0176LFVP fits the standard RV fresh water inlets that are found on nearly all RVs including your 2005 Gulf Stream Cavalier so this would be a great solution for you. view full answer...
We do not carry the water inlet and L-shaped attachment you asked about for your Jayco camper, but may have an inexpensive solution that will work for you.
I recommend the Camco RV Fresh-Water Tank Filler, part # CAM40003. This threads onto your water hose and you just slip this into the inlet on your camper. view full answer...
I may have a solution for you, while we more than likely have a replacement water inlet panel for your 2000 Chinook Class B Motorcoach we do not have a way to confirm the correct one for the cutout on your vehicle.
The Valterra City Water Inlet for RVs in White # A01-2001VP or Black # A01-2001BKVP fit cutouts that are 5-1/2" x 3-1/2" so if that matches the cutout dimensions on your Chinook this would be a great option.
While your current water inlet panel has the city water inlet on the... view full answer...
The fitting on the Vaterra Water Inlet for RVs # A01-2003VP that you referenced that is designed for a hose to slip over has an outer diameter of 1-1/8 inches. view full answer...
I attached a picture that shows all of the dimensions for the Valterra Flush Mounted Telescoping Water Inlet for RVs # R920 that you referenced including the mounting holes and size of hole cut out that would need to be made. view full answer...
To replace you entire city water inlet your best option is the part # A01-2000BKVP which comes with everything you'll need to replace everything you've damaged so far. view full answer...
What you'd want to do is use a valve like part # CAM2003 attached to the garden hose you'd use to fill through the tank and then on the opposite end attach the # CAM36601 which you would use to direct the water into the tank. view full answer...
Nice question, lets check and see what I found:
**RV City Water Inlet with Brass Check Valve - 1/2" MPT - Aluminum Flange - Surface Mount # 37262185.
Yes, it will work. The city water connection or inlet is more of a universal part and not a brand specific item.
You can mount it as long as you make sure you have the proper connections and plumbing know how. If you want this to replace your old or damaged inlet just make sure you follow the specs and directions or have a plumber install... view full answer...
Most RV fresh water tanks have to be gravity or hand pump fed and cannot be filled using an electric pump. That is because they are designed as a low pressure application.
You can either take the hose straight to the water inlet or you can use a hand pump like the Valterra Antifreeze Hand Pump with City Water Connection Hose for RV Winterizing # P23507VP. While this pump is meant for winterizing your RV, it could be used for water to transfer water from a container to your fresh water tank. view full answer...
The Camco RV Plastic Fresh-Water Fill Hose # CAM36601 is designed to attach to the spout of a water fill inlet like the part # CAM37102 which is ribbed to match. view full answer...
The Valterra DWV Adapter for RV Sewer System # D50-2922 does use the same 1-1/2 inch pipe thread size as what your Jabsco Macerator uses so it will match right up. And yes, it's okay to reduce the pipe size in the way you described as well. view full answer...
The Camco RV Water Line Blow-Out Plug # CAM36143 referenced in your question will connect to your RV's city water inlet to allow you to remove water from your water lines. After inserting the plug and opening all the drains and faucets, you will need to attach and activate an oil-less air compressor, which is not included.
I have attached a short video demonstration on this product that you can also check out. The video goes into further detail on this process. view full answer...
The AquaFresh High Pressure Drinking Water Hose for RV # W01-5180 is a fine choice that is rated for 160 psi, and measures in at 15' long.
Another great choice that offers more length is the AquaFresh High Pressure Drinking Water Hose for RV # W01-5300. This hose is also rated for 160 psi, and measures in at 25' long. view full answer...
While we did provide the cutout dimensions for that neighbor that you are referring to, we did not hear back from them to confirm whether the Valterra City Water Inlet for RVs in White # A01-2001VP fit their 2000 Chinook. The size you need truly depends on your cutout. If you have a 5-1/2" x 3-1/2" cutout for your inlet panel, these models fit what you have. Like the previous answer, you may have to re-route your hoses to match your inlet depending on your city water inlet's position.
As... view full answer...
The Camco garden hose shut-off valve # CAM20073 is designed for non-potable use. I recommend the brass version, # CAM20123, which is NSF/ANSI 61 certified. This is the certification for potable water piping (drinking water). I have linked videos on both parts for you. view full answer...
Yes the RV City Water Flange part # 372160-85-A-36A is same dimensions as 1680-85-a-3p that you asked about. This has a brass valve like you are looking for as well. view full answer...
There isn't an adapter to secure a hose to the Valterra Water Inlet # A01-2003BKVP though we do have other options that do allow you to secure a hose. Take a look at water inlet # A01-0169LFVP as one example. I have included a link to all of the inlets we have for you to browse. view full answer...
You can use the Dometic RV Water Heater - Gas and Electric - Automatic Pilot - 120 Volt - 10,000 Btu - 6 Gal Tank # DMC74FR to replace your water heater.
However, I recommend going tankless. I'll use the Furrion RV Tankless Water Heater - Gas - Automatic Pilot - 60,000 BTU - 16" x 16" Door # FR98SR. They heat water instantly and only when needed. You do not need to waste propane keeping several gallons of water hot overnight when you can have it on demand and save propane.
You can even... view full answer...
It sounds like you might be looking for a waste valve cap. The Valterra RV Waste Valve Cap part # T1020 is a great cost effective option with seal and tether so you don't lose it. It's also available with a garden hose inlet for cleaning, the Valterra RV Waste Valve Cap part # T1020-1VP. view full answer...