Filling Freshwater Tank on RV Through Valterra City Water Inlet # A01-2000VP

Question

Question:

How do you keep the hose from coming out of the gravity feed inlet when filling? The cup that fit over the inlet is a 1/4 turn, but I cant find a hose end that has the same kind of fitting.

asked by: Ron K

0

Expert Reply:

What you'd want to do is use a valve like part # CAM2003 attached to the garden hose you'd use to fill through the tank and then on the opposite end attach the # CAM36601 which you would use to direct the water into the tank.

expert reply by: Jameson C

0

Answer 1

The Valterra City Water Inlet and Lockable hatch #a01-2004vp has a plastic fitting and the other #a01-2000vp has a brass fitting. If you plan on traveling to colder climates, I would recommend getting the brass fitting.

view full answer...

Answer 2

The only difference between the carded and non-carded Valterra city water inlets that I'm seeing is the "carded" versions come with all of the parts needed for installation like what you can see with the Valterra Lockable Dual RV Water…

view full answer...

Answer 3

I would be happy to help you find a hitch receiver for your 2021 Mercedes-Benz Sprinter 2500 van with a factory step. In order to haul a trailer you are going to need a wiring harness as well. The Curt item #13358 you were looking at is the best…

view full answer...

Answer 4

The Curt hitch part #13358 that you referenced fits the long and short wheelbase versions of your 2016 Mercedes Benz Sprinter 2500 with the factory step bumper. To determine if your spare carrier will fit past the bumper when this hitch is installed…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The Curt hitch item #13358 is a confirmed fit for your 2016 Mercedes Benz Sprinter 2500 Model 170 with OEM bumper step. The spare tire can be reinstalled after installation and removed when needed without any issues related to the Curt hitch item…

view full answer...

Answer 7

The Timberline is actually the towers #Y33TR, so you will either have the CoreBar crossbars #Y00421 or the JetStream #Y00426. You can trim these bars to a shorter length and I do recommend using a new hack saw blade to do so. The aluminum crossbar…

view full answer...

Filling Freshwater Tank on RV Through Valterra City Water Inlet # A01-2000VP

Product Page this Question was Asked From

Continue Researching