I may have a solution to help you better secure your kayak on the crossbars, but there is not an available eyelet that can be mounted on the Curt # C18118 since there are not channels on the bars. It sounds like maybe you don't already have a kayak carrier, which would provide the best possible solution to secure kayaks to your roof rack. I recommend using the Curt J-Style Kayak Carriers # C18320, which will mount to the Curt roof rack bars on the # C18118 and comes with 2 tie down straps... view full answer...
I took a look at the online copy of the owner's manual for a 2015 Jeep Cherokee and it can be flat towed so long as it is a 4-Wheel Drive and has a 2-Speed Power Transfer Unit so you will need to contact the dealer to find out if this Cherokee has those features.
If it is a 4WD with a 2-speed transfer case there are a number of parts you will need, starting with vehicle-specific base plates. I'll list all the parts you need:
- Base Plate Kit: Demco Tabless Base Plate Kit # DM9519308
-... view full answer...
I do have an option for you but the Demco Tabless base plate kit # DM9519340 does not have a compatible rock guard at this time. I recommend Roadmaster Crossbar-style base plate kit part # RM-521451-4 with the Roadmaster All Terrain tow bar part # RM-522. You will also need safety cables part # RM-645.
For a rock guard you can use Roadmaster Guardian Rock Guard # RM-4000 which mounts on the tow bar or you can use a hitch-mount adjustable mud flap system like Rock Tamers # ERT00108 which... view full answer...
I can help you with all the parts you will need to flat-tow your 1999 Jeep Cherokee. To flat-tow your Jeep Cherokee, you will need a base plate kit, tow bar, lighting or wiring, safety cables, and a supplemental braking system.
There are a few options for base plate kits on the 1999 Jeep Cherokee that can vary in price but all will work just fine on your vehicle. I would recommend the Roadmaster Classic Base Plate Kit, part # 1418-3. The # 1418-3 Kit will fit all models of the 1999 Jeep... view full answer...
To connect a Roadmaster Sterling All-Terrain tow bar # RM-576 to a set of Blue Ox # BX1110 base plates you are correct that you will need RoadMaster Sterling Tow Bars to Blue Ox Brackets Adapter # RM-031-5. This kit will work as long as your tow bar serial number is above 14,501.
The tow bar and base plates are just two of the components needed for safe and legal flat towing. The linked article covers these and the other items required, which include a wiring/lighting solution and a supplementary... view full answer...
Virtually all U.S. states and Canadian provinces require that a towed vehicle be equipped with a supplemental braking system of one type or another. Even if you happened to be towing in an area where one was not required my guess is that only a few miles would be required for you to see the merits of a toad braking system!
Supplementary braking systems come in many forms. There are purely mechanical systems and portable/wireless electronic systems like the outstanding Blue Ox Patriot #... view full answer...
Assuming you already have the # RM-522 Roadmaster Falcon All-Terrain tow bar that you'd looked at, you'll also need a base plate kit, safety cables if you don't already have them, a wiring solution, a supplemental braking system and possibly a high/low adapter if the installed base plate has a greater than 3 inch height difference from the height of the receiver on the vehicle you'll be towing your Cherokee with.
For base plates, I'd recommend the Roadmaster # RM-521452-5 which fits non-Trailhawk... view full answer...
The item you selected, Adapter 4 Way Flat to 6 Way Square for Jayco, part # 30104 may work, but the wire functions may be incorrect, and would require you to wire the adapter by function using circuit tester, part # PTW2993.
I would recommend changing your vehicle and trailer wiring to 6-Way Round. For your Jeep you will need, Adapter 4 Pole to 6 Pole and 4 Pole Trailer Wiring Adapter, part # 37175. Then, for your trailer, you will need Pollak 6-Pole, Round Pin, Trailer Wiring Connector... view full answer...
You'll need a tow bar, base plates, safety cables, wiring for the taillights, a supplemental braking system, and possibly a high/low adapter if the installed height of the base plates has a height difference compared to the motorhome hitch greater than three inches. I'll link to an article that shows how to measure for the height difference, along with a listing of our available high/low adapters.
For a tow bar, I'd recommend the Roadmaster Falcon All-Terrain tow bar, part # RM-522 along... view full answer...
According to Blue Ox, because the Patriot # BLU37TR is self contained, a separate connection to the brake stop lamp switch isn't necessary, as opposed to the Roadmaster # RM-9400 which would need a stop lamp switch installed. view full answer...
You can install a 7-way in your 2000 Jeep Cherokee but there is no plug-in harness for this vehicle, you are going to need to add a number of parts.
First you need to add a 4-way, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118354 and I have linked a video so you can see how this installs on a '00 Jeep Cherokee.
From there you are going to need the Universal Installation Kit for Trailer Brake Controller # ETBC7, which will give you a 7- and 4-way adapter (this... view full answer...
There certainly is!
As long as your Cherokee has the 2 speed transfer case with a Neutral position, it can be successfully flat towed. FWD vehicles would need to be towed with a tow dolly like # DM9713093, and 4x4 vehicles with a 1 speed transfer case need to be trailer towed.
Assuming your Trailhawk has the 2 speed transfer case, you'll want to use the Blue Ox # BX1143 base plate kit.
You'll also need a few other items to complete your flat towing setup:
• Blue Ox Alpha 2 tow bar,... view full answer...
The correct kit for changing your brake system over from air to hydraulic brakes on the motorhome is the RoadMaster BrakeMaster Second RV Kit for Hydraulic Brakes, item # RM-98300. This kit will only work if you have the RoadMaster BrakeMaster for Motor Homes with Air Brakes, item # RM-9100.
RoadMaster recommends that you have BrakeMaster components installed by a competent mechanic, with experience in motorhome installations. view full answer...
Yes! We can help you order replacement hitch installation hardware for the hitch you already have for your 1997 Jeep Cherokee Country. We can also get you set with a wiring harness.
For replacement hitch hardware use part # RHK. Just enter that part in our search field and press enter. Then click on the RHK. On the next page you'll enter your hitch part number and the manufacturer name. This should be noted on the safety/warning sticker on your hitch. This will tell us the exact hardware... view full answer...
Thank you for you patience, I spoke to my tech guy at Roadmaster about the extra parts it says you need in the instructions.
The 1/4 inch check valve it calls for is to plug the vacuum line on the original vehicle so you can swap the systems back and forth with out causing a vacuum leak. This part you will not need at all because you are not swapping vehicles.
You will need the Replacement Cylinder for Roadmaster Brake Master and Even Brake Supplemental Braking System # RM-452109-10 and... view full answer...
If you have the Roadmaster Crossbar-Style Base Plate Kit # RM-521446-4 on your 2015 Jeep Cherokee Trailhawk you can use the RoadMaster Base Plates to Duncan Adapter # RM-038. If you have the Roadmaster Direct-Connect Base Plate Kit # RM-521446-5 you will need new Arms # RM-ARMS to change it to the crossbar-style arms.
I do recommend checking the condition of your tow bar to determine if it will need any repair. Depending on if the tow bar needs any repair it may make more financial sense... view full answer...
If the Derale Snap-In Radiator Adapter Fitting for GM # D13035 are too small, then you might consider taking a look at the Derale Radiator Adapter Fittings for GM # D13018 which have 5/8" inverted flare fittings.
However if you have have 3/8" inner diameter lines, then you could use the Derale Radiator Adapter Fittings for Dodge and Jeep # D13028 instead. view full answer...
To flat tow your 2018 Jeep Cherokee Trailhawk behind your motor home, you will need a base plate kit, tow bar, safety cables, a lighting solution and a supplemental braking system.
Starting with the base plate kit, I recommend the Roadmaster EZ5 Base Plate Kit # RM-521446-5. I checked with Roadmaster and confirmed that these will fit your 2018 Cherokee Trailhawk. The EZ5 brackets are virtually invisible and easy to mount and remove. Then for a compatible tow bar, I recommend the Roadmaster... view full answer...
The parts needed to flat tow your 2022 Jeep Cherokee Trailhawk include the following:
- Blue Ox Base Plate Kit # BX1143
- Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380
- Flexo-Coil Wiring Kit # RM-15267 OR # RM63MR if you have ParkSense
- Battery Charge Line Kit # RM-156-25
- Blue Ox Patriot Radio Frequency, Portable Braking System # BLU37TR
- High-Low Adapter (see article, bracket height is 20")
I tried to incorporate as many Blue Ox parts as I could, but when it comes to wiring... view full answer...
Yes, you will need the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers part # 3014-P even if your 2017 Jeep Cherokee Trailhawk has the factory tow package. This harness will plug into the tow package port on your vehicle and the back of the brake controller which is how it allows for plug and play install.
For a brake controller to use with this harness, I recommend the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195. The Prodigy P3 is our best selling brake controller... view full answer...
Go To Results