The Blue Ox Tail Light Wiring Kit with Block Diode # BX8811 that you referenced does not come with a 4-Way connector as you stated.
To add a 4-Way connector you can simply use the Hopkins Wiring Harness with 4-Pole Flat Trailer Connector # HM38138 and connect it to your current wiring using Butt Connectors # DW05744-5.
For a look that is a little more clean and will provide you with a 7-Way to connect to your RV you can use the Hopkins Nite-Glow Tow Bar Extension Cord w/ Socket - Coiled... view full answer...
Great news, there will be 4 snake wires, also known as bolt leaders, included in the hardware kit for trailer hitch # C13315 which is confirmed to fit your 2016 Mazda CX-5.
I do want to let you know that if you plan on using this hitch for any non-trailer load like a bike rack you will need to use a stabilization strap like # 18050.
If you would prefer a hitch that this isn't needed then I would recommend the Draw-Tite # 76138.
I've attached installation videos for you to take a look... view full answer...
Yep, you did assume correctly. You do indeed get the complete pair of J-style carrier when you order the Rhino-Rack Kayak Carrier # S512. view full answer...
The red wire that you run from the Hopkins # HM11143165 to the battery on your 2016 Mazda CX-5 is a 12 gauge wire.
If additional wire is needed you can order it by the foot with part # 12-1-1. view full answer...
Yes! I am happy to confirm that the Curt Hitch - 1-1/4" # C11383 comes with all installation hardware included for your 2012 Mazda 3 hatchback. I went ahead and attached the hardware list from the instructional manual of the hitch. view full answer...
The Swagman XC-Extended Bike Rack for 2 Recumbent Bikes # S64650-EXT will include both the XC # P189 and XTC # P318 wheel hoops.
We do carry the Swagman XC2 Bike Rack # S64650 that only come with the XC wheel hoops and you can later add the XTC Hoops # P318 later if you decide you need them. view full answer...
The Thule The Stacker - Rooftop Multi-Kayak Carrier Item # TH830 consists of a front and a rear part. So you get 2 uprights. A quantity of 1 in this case means 1 complete system; a front and rear! I have linked a video review of this carrier for you. view full answer...
The Valterra RV Sewer Hose Carrier part # A04-3460 does not come with hardware, we do however offer the Self-Tapping Screw part # FA1131822 which may work for you depending on how you mount it. view full answer...
The DaLan Class I Fixed Bar Trailer Hitch, part # 217314 will come with all hardware necessary for installation. The ballmount on the hitch is permanently attached, so this hitch is not meant for use with a bike rack or other accessories. view full answer...
It certainly does, the fork block of the Swagman # S64704 Enforcer roof mount bike rack is lockable and includes 2 keys. I've put together a photo for you that shows this. I've also linked to a product demonstration video for you. view full answer...
The Konig Standard Snow Tire Chains CB12 # TH01221097 that you referenced actually come with a rubber tensioner built into the chain system where the face of your 215/45-18 tire will be. This is a perfect solution for your 2017 Mazda 3.
Attached is a review video for you to check out. view full answer...
Yes, we sell our tire chains as a set of two chains, one for each tire on the same axle. If your Mazda owner's manual says your car can use chains on all four tires then you would order two sets to equip all four tires with chains.
Your 2002 Mazda Protégé came with two stock tire size options, either 195/50-16 or 195/55-15. Before selecting chains check your tire size (its indicated on the tire sidewall) and review your owner's manual for any guidance regarding use of tire chains on your... view full answer...
Our trailer hitches like the Draw-Tite # 76138, which is a confirmed fit for your 2018 Mazda CX-5, do not come with electrical, but I can point you in the right direction for your Mazda.
I recommend going with the Tekonsha T-One # 118746 which plugs in behind your tail lights and the draws power from the battery on your CX-5 via the 12V power lead. This bypasses the wiring on your CX-5 so that any issues on your trailer to not trickle back to your tow vehicle.
You also need a ball mount... view full answer...
Per your first question, yes, we ship all our hitches with all the necessary installation hardware. These hardware packages will include nuts, bolts, spacer blocks, and bolt leaders. Some of our hitches will have a hardware picture if you mouse over the picture alternates so you can see what to expect.
A hitch for any given vehicle is going to be pretty similar from manufacturer to manufacturer. They want to make a strong, but easy to install hitch so they usually end up designing similar... view full answer...
The recommended ball mount for Curt trailer hitch receiver, part # C11356, is 9-3/8 inches long with 2-5/8 inches of rise or 3-1/4 inches of drop. It's part # C45016.
If you prefer a draw bar with 5 inches of rise use part # C45014. The hitch ball is not included so you can use part # A-82 for a 2 inch ball or part # A-80 for a 1-7/8 inch. They'll fit both the included and the other draw bar I mentioned and # F-4 is the pin and clip that fits.
You also need a wiring harness to power... view full answer...
The # ETBC7 is going to have everything you need, including the mounting bracket you're looking for, but since the Curt # C13315 has a concealed crosstube behind the bumper, you might have some difficulty mounting the bracket to the tube. For that reason you may want to use the Curt Easy Mount Bracket # C58000 which connects to the receiver tube and provides a mounting surface for your 7-way connector.
As for the RedArc Tow-Pro Elite # RED44FR , I can't recommend that enough. It's going... view full answer...
The Curt Trailer Hitch Receiver # C11356 does come with the fish wire so that you can properly install the included hardware.
Please note that per Curt, the Curt Trailer Hitch Support Strap # 18050 must be used for all non-trailer loads, such as bike racks, cargo carriers and such. Otherwise the warranty for the Curt Trailer Hitch Receiver # C11356 will be void.
If you will be using the hitch for towing, then I recommend using the Curt Class II Drawbar # C45016 along with either the... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11127 is a confirmed fit for 2012-2015 Mazda 5 models. It does come with pin and clip, but the ball mount is sold separately. For a ball mount, I recommend the Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs # C45520. You will also want a hitch ball like # C40001 for a 1-7/8 inch or # C40018 for a 2 inch.
For your vehicle trailer connection, I recommend the T-One Vehicle Wiring Harness with 4-Pole... view full answer...
The Konig Standard Snow Tire Chains # TH01221097 actually come with some extra links that you can use for repairs.
If you don't already have repair pliers then part # TCRP3S is a good option to have as they were built for snow chains.
These chains will fit your 2018 Mazda 3 as long as you have the 215/45-18 size tires. view full answer...