The MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat # MA00-04002K you were looking at comes with 2 butt-connectors for you to be able to splice your vent's wiring to the wiring in your RV. You will want a good pair of crimps # PTW30764 to crimp the ends of the butt-connectors. view full answer...
The Fan-Tastic Roof vent fan you mentioned includes the mounting hardware, but no sealant. I'd recommend using the TemPro Silicone Sealant, part # 0160297 to provide a strong but flexible seal between the vent and the roof of your RV or trailer. view full answer...
Yes, screws are included with the Fan-Tastic Vent Roof Vent with 12V Fan and Thermostat # FV802250.
The accompanying photo shows the screws that come with the vent, and the video review I linked below also shows this hardware. view full answer...
Since the Fan-Tastic Vent Roof Vent Upgrade # FV807357 is designed to work with Fan-Tastic vents with fans that are already installed, it does not come with the fan assembly with the kit. You would use the same fan from your Fan-Tastic Fan model 2000BTS-B and use it with the # FV807357
With that being said, if you need a full setup that includes the same rain sensor functionality with a powered lift, that is the Fan-Tastic Vent Roof Vent w/ 12V Fan and Thermostat - Powered Lift - 14-1/4"... view full answer...
The Ventline Exterior Wall Vent for RV Range Hoods # V2111-55 does not include a screen to block insects but it does have a lockable damper panel that lets you secure the damper when the range hood fan is not in use, such as during storage periods. This feature helps stop drafts that can cause your HVAC system to turn on unnecessarily.
We also have this item in black as part # V2111-55.
Installation requires hardware such as # 31071 (ten screws are needed) as well as a silicone rubber... view full answer...
The MaxxFan Mini Plus Manual RV Roof Vent # MA00-03801 does indeed include mounting screws. However, it does not include sealants so you will also need LaSalle Bristol Self-Leveling Sealant # 34427034145-1 and Butyl Tape # 344270341410-1 to get a weather-tight seal.
Our returns policy is a bit long, so I have it linked below if you wish to read it in its entirety. That said, the main points are as follows:
-Within 60 days of receipt of your shipment
-New, unused item
-Shipping and handling... view full answer...
The Fan-Tastic Vent Roof Vent # FV802250 that you mentioned comes with a garnish but no sealant. For that you simply need something like the Sealant # 0160297 which comes in a 10.1-Fl oz cartridge.
Review videos of both products have been linked for you to check out. view full answer...
The replacement Digital Remote Control for Fan-Tastic Vent Roof Vents, part # FV9068-09, may not have come with the two required AA batteries so I would first check that your remote has two of this size battery. Also please make sure they are installed in the correct positive/negative orientation; if even one of the batteries is installed the wrong way the remote will not function at all.
Also make sure you have first selected the MANUAL operating mode and that the vent lid is in the open... view full answer...
The MaxxAir MaxxFan Mini Roof Vent with 12V Fan # MA00-04401M weighs just 10 lbs.
I have added a link below to a video review for you to check out as well. view full answer...
The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat - Manual Lift - 10 Speed - White # MA00-05100K does not come with a wall switch, but the Replacement Handheld Remote for Maxxair Roof Vent Intake/Exhaust Fans - Qty 1 # MA00A01150K will work with it. Keep in mind this does not have the power lift.
If you want the power lift, Then the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - White # MA00-07000K is what you want which comes with the remote... view full answer...
The Replacement MaxxAir Lifter Arm Bushing for MaxxFan RV Roof Vents # MA10-20287 comes in a quantity of 1 so the price that you see on the product page is for a single bushing. view full answer...
Camco part # CAM40148 is a smoke-color replacement vent LID ONLY that fits specific production years of Ventline and Elixir vents models. It fits Ventline vents with a continuous metal hinge that were produced before 2008 and similar Elixir brand vents produced after 1994. This hinge type is shown in the linked photo.
We do also offer complete vent units that include the lid. These 14 x 14-inch complete vents are shown on the linked page. We have models without fans like # V2092SP-29 or... view full answer...
Thanks for reaching out!
The motherboards on the MaxxFan Deluxe Roof Vent # MA00-07500K are sealed so condensation (and corrosion) won't be an issue. I confirmed this with my contact at MaxxAir, so it sounds like they've improved them!
Attached is a review video for you to check out. view full answer...
For a trailer roof vent that has a rain sensor you can use # FV803350. I have linked a video review of this fan for you.
The MaxxAir MaxxFan Deluxe # MA00-07500K does not have a rain sensor but does have a large rain shield to keep out rain. I have linked the instructions which cover installation as well as features of the fan.
These fans fit all standard 14-1/4 by 14-1/4 inch openings. view full answer...
The MaxxAir Mini Deluxe Trailer Roof Vent, # MA00-03801 has a bug screen over the fan blade and the motor is encased within the upper and lower pieces of the unit. Please see the attached product review video. view full answer...
The Ventline Roof Vent with 110V Fan # V2128SP-01 includes two pigtail wire leads and a wiring compartment for making the AC power connection to existing trailer wiring. No plugs or wiring harness are included but you can use butt connectors like # 05732-2.
If you need an installation kit you can use part # 344270KITW which includes both mounting screws and sealant and that is suitable for trailer roofs made of metal or coated metal roof and wood (but not rubber). For a rubberized roof... view full answer...
The MaxxAir MaxxFan Deluxe # MA00-07500K used to come with the ivory colored remote. It has since been replaced with a black remote. I went out to warehouse to verify that the vents we have in stock have the black remote. view full answer...
The Camco RV and Enclosed Trailer Roof Vent Cover # CAM40453 is a cover only, and it is designed and sized to work with standard 14 x 14 trailer and RV roof vents. This cover allows you to keep the vent open at all times, even when traveling down the road and when it is raining.
The smoke-color vent cover measures 18-1/2 long x 18 wide x 8-1/2 high and it includes both a removable screen and mounting hardware. view full answer...