Does Fan-Tastic Vent Roof Vent With 12V Fan Come With Screws

Question

Question:

Does it come with screws? Fan-Tastic Vent Roof Vent w/ 12V Fan

asked by: Ron D

0

Expert Reply:

Yes, screws are included with the Fan-Tastic Vent Roof Vent with 12V Fan and Thermostat # FV802250.

The accompanying photo shows the screws that come with the vent, and the video review I linked below also shows this hardware.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The correct replacement Roof Vent Cover would likely be the Fan-Tastic #FVU1500BL for black, but you'll want to check the model number of the existing vent. If the number ends with 'DF', this would be the correct tit that would attach to…

view full answer...

Answer 2

Having Item #FVU1500WH on your vent is a great idea and I always recommend it when I do install videos on vents. You have also just pointed something out that I need to start making everyone aware of when I do the install videos so I thank you for…

view full answer...

Answer 3

When using a Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover #FVU1500WH which doesn't have the complete height to allow the roof vent to totally open the motor will stop once it feels resistance and it will hold at that point without issue.

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Does Fan-Tastic Vent Roof Vent With 12V Fan Come With Screws

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching