The padlocks included in the Roadmaster Accessory Kit for Nighthawk and Sterling Tow Bars # RM-9284-2 replace the safety pins connecting the tow bar to the vehicle base plate. This helps secure your vehicle to the tow bar while the tow bar is locked in place with the included hitch pin. If you are using a crossbar style base plate one lock will attach the tow bar to the crossbar and the other lock will need to replace the pin holding the cross bar to the vehicle mounts. view full answer...
Yes, the Pop & Lock Custom Tailgate Lock with Handle # PAL1700C that you referenced comes with the tailgate handle, 2 keys, lock mechanism and all necessary hardware for installation.
It is compatible with the following vehicles:
2004 - 2018 GMC Canyon
2004 - 2018 Chevrolet Colorado view full answer...
The Thule # TH903202 EasyFold XT bike rack won't require an additional hitch lock, as the shank that slides into the hitch on the vehicle features an integral locking knob that serves to tighten up the shank/hitch connection so the rack doesn't move around in the hitch. The cradles that hold the bike frame are also lockable, and all the locks are keyed alike so you won't need multiple keys.
I've linked to a product demonstration video for the EasyFold bike rack, and have provided a photo... view full answer...
Yes, the Yakima FullSwing 4Bike Rack, # Y02465, does include a lock that will secure the rack to your vehicle's trailer hitch.
The lock on the Yakima FullSwing is integrated in to the orange anti-rattle knob that is located at the bottom of the rack. When you install the bike rack into your trailer hitch, you will turn the anti-rattle device knob until the rack is secured in the hitch. The Yakima FullSwing will include a set of keys that will fit the lock in the knob. Once you use the... view full answer...
The Pop and Lock # PAL5500 does come with the slot available for the backup camera, but does not replace the factory camera or add one to your vehicle. This part is a confirmed fit on the 2011 Toyota Tacoma. If you wanted to add a power locking mechanism you would want to use part # PAL8525 in addition to the PAL5500.
There is not currently a tailgate lock that we have available that would add the tailgate camera to your Tacoma if you don't already have it present. view full answer...
The Rhino-Rack 2 Bike Rack # RRRBC045 doesn't come with bike or rack locks and since the only way to accomplish this is by wrapping a cable lock like part # e98891 around the bikes, rack, and trailer hitch I recommend checking out a different bike rack instead.
For a cost-effective bike rack alternative you can use the Swagman Trailhead # S63360 which can be locked to the vehicle with part # S64029. You will still need a cable lock like part # e98891 to lock the bikes though.
For a 2-bike... view full answer...
The Yakima EXO Swing Away Enclosed Cargo Carrier # Y62VR includes locks for the box and the rack. You can purchase tail lights and license plate holder with the part License Plate and Tail Light Relocation Kit for Yakima EXO System part # Y74VR. This includes the tail lights, a place to mount your license plate, and the wiring that you need to plug into a 4-way on your vehicle.
If you don't already have a 4-way on your vehicle, let me know your year make and model and I can tell you... view full answer...
What you see in the pictures of the Pop and Lock Locking Tailgate # PAL1700C is what comes with it. This product should work well on your 2011 Chevy Colorado.
Check out the picture I attached that shows the installation sheet that comes with this product. view full answer...
The BOLT Toolbox Latch Retro Fit Kit, Codes to Ford Key # BL7022698 that you referenced does not come with a striking plate. Since all of the handles we offer are either retro-fit kits or replacement parts, none of them come with a striking plate.
A latch that may work for you is the UWS Replacement Twist Latch # UWSTWISTLOCK. This lock mount entirely on the outside of the box and is lockable with a padlock. BOLT offers padlocks, like # BL7018519 for Ford keys, that can be keyed to vehicle... view full answer...
You would only need one Swagman Hitch Pin Lock, part # S64027, to secure the Swagman XTC4 Bike Rack, part # S64665, to your trailer hitch to help deter theft. It would be possible to unbolt the rack from the shank and take the rack. If you wanted to add another locking hitch pin for added security, you could.
We also offer the 10 Foot Cable Lock, part # e98891, which can be used to lock the bikes to the bike rack.
The rack now comes with rubber straps as an upgrade to the old hook and... view full answer...
I believe you are referring to the Diamondesque License Plate Frame - Chrome and Clear # CR18130 that you were looking at. This is sold as a single frame so you would need a quantity of two if you wanted one for the front and the back of your vehicle.
I recommend adding anti-theft hardware to deter theft of your license plates and covers. You will want to check your current hardware and match up accordingly with the following options: Star Pin Locking Fasteners (round nuts) # CR81300 or... view full answer...
Since you don't have any trailer wiring harnesses on your 2020 Honda Pilot you'll want to start with adding a wiring harness; for that I recommend using the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # 118286. You can also use the Pollack # PK12711U as the mounting bracket for this connector to give this a nice, clean installation.
For the brake controller, I recommend using the Curt Echo Mobile # C51180 since the installation won't require any splicing... view full answer...
Curt Trailer hitch # C12038 does not include lock washers. So it wasn't that you didn't get them it is that the hitch doesn't come with them. Using Loctite would be a great idea. Blue Loctite is should be all you need, # LT37614. Because the red Loctite is pretty much permanent. So should the hitch need to be removed for any reason, it would take pneumatic tools if you used red Loctite.
Also, make sure the bolts are torqued to the specifications in the instructions. If they are too loose... view full answer...
We have the Dutton-Lainson Coupler Repair Kit # DL13968 that includes the chain and pin that will fit the Dutton-Lainson Trailer Coupler # DL13728. You can remove the chain and pin while holding onto the other parts in the event you need to replace the coupler latch.
Personally I am not a big fan of that type of pin as it can fall out as it wears down over time. I recommend the Master Lock Hitch Receiver and Coupler Latch Lock Set # 2848DAT as it allows you to secure your trailer to your... view full answer...
Yes, the Rhino-Rack part # Y02-480B is a complete adjustable track-mount roof rack system that includes a pair of tracks, four leg assemblies, two aero-style crossbars and locks. This is intended primarily for applications on camper shells, hard tonneau covers, or hardtop resin roofs as found on some RVs.
This rack setup could also be installed on the roof of a vehicle such as your 2012 Chevrolet Silverado but we have other custom roof rack options that will not require drilling into the... view full answer...
You will not need any additional items or adapters to install the SportRack Semi-Custom Roof Rack, # SR1010, on your 2012 Chevrolet Cruze.
You may have read about an additional short-roof adapter for vehicles with short or dramatically curved roofs, but this will not apply to your vehicle.
This roof rack does not require any tools for installation and includes integrated locks to secure the roof rack to your vehicle.
If you would like a recommendation on a bike carrier, cargo carrier... view full answer...
Yes, the photo on our web page is of the actual hitch. If you mouse over the image links below the title you will see more actual pictures of the hitch and the display image shows the hitch from the underside of the vehicle. The Photo of the Draw-Tite Class III Trailer Hitch, item # 75148, is also the actual photo but we have not had the opportunity to photograph it on the vehicle. We also have a video installation of the Curt Class III Trailer Hitch on a 2007 model Nissan Murano (see link).... view full answer...
The Annex for 2 Person Yakima SkyRise Tents # Y07421 is just the enclosure that you see pictured beneath the Yakima SkyRise tent in the attached review video. This is a fit for the (discontinued) SkyRise Y07407 (Red) or SkyRise HD # Y07436 (Tan and Red).
The SkyRise tents are compatible with your Crosstrek but you will need to use a different roof rack if the one you currently are using is the OEM roof rack according to Yakima. Roof rack systems where the crossbars end inside the legs... view full answer...
The Draw-Tite Class II Trailer Hitch, item # 36501, for the 2011 Ford Escape does not include the wiring harness for the vehicle.
For trailer lighting you will need the Tow Ready Custom Fit Vehicle Wiring, item # 118551, for your 2011 Ford Escape. I have posted installation instructions and an install video for you to review.
You may also want to consider the following items to complete your Class II towing setup.
Draw-Tite Ball Mount, item # 36051
Hitch Ball, item # 19258
Hitch Ball,... view full answer...
The Brophy Hitch Extender, # HE06, comes as pictured. You will need a hitch pin and clip like # PC3 or a hitch pin receiver lock like # e98880 to secure the extender. If you want safety and security you will need a receiver lock on both the extender and the bike rack. You may also want to purchase a security cable to secure your bikes to the rack. This cable would run through the frames of the bikes and around the hitch or through the safety cable attachment on the hitch to secure the... view full answer...