The HappiJac Truck-Mounted Camper Tie-Downs # LC182908-182928 does come with the stabilizer bar. I've included a video showing the contents of this product so check that out! view full answer...
For your 2024 Chevrolet Silverado 3500, you can use the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC3221.
There are currently no front tie downs available for your vehicle, however they are expected to be available at some point, just have not been confirmed yet. You are also going to need a set of turnbuckles # TLS9529 to secure your camper to the tie downs. view full answer...
The TorkLift Custom Frame-Mounted Camper Tie-Downs such as the Front # TLC2219 and Rear # TLC3215 that fit a 2016 Chevy Silverado 3500 Crew Cab without board or step underneath truck bed do come in pairs. They come with 2 tie-down inserts, frame brackets, and installation hardware; I've added links to video reviews of both products for you to take a look at. view full answer...
When you order the # TLF2007 you will receive two of the tie downs. Basically it's all you need for the front, so it's both sides.
You would need to order a set for the rear of your truck based on the truck you are driving. view full answer...
The part # LC182906-182971 from Happijac is a set of front and rear tie downs so with this part number you'd have tie downs covered for all 4 corners of the truck. view full answer...
The Brophy Stake Pocket Mounted Camper Tie-Downs are all sold in a quantity of 4, including the kit # TDSF you're wanting. This is just how Brophy kits them together so they aren't available only in pairs.
You can either use the extra 2 that you don't plan on using either as a backup or you can sell them to help offset what you paid for the whole kit. view full answer...
I reached out to my contact at TorkLift International, and the pins you are referring to are 1/4 inch diameter and 2-1/2 inches long for the TorkLift Custom Frame-Mounted Camper Tie-Downs for a Toyota Tacoma. These frame mounts are vehicle specific and any step rails could cause interference. view full answer...
The only other part that comes in the package of your TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLR3501 apart from the parts you mentioned is the metal pin/clip that attaches the tie-down shank into the receiver shank. I went ahead and attached a video that shows all of the parts included.
If this is not the part you are inquiring about, I would be happy to assist you if you respond to this answer with a photo of the extra part. view full answer...
Good question but the frame-only portion is not available as a separate purchase; you do have to get the entire part, the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF4007. view full answer...
Both the # TLF3007 and the # TLF2020 include the tie-down inserts, the frame brackets and all necessary installation hardware, both are complete kits that include everything needed to install the tie-downs.
Turnbuckles like the # TLS9522-2-LK locking TorkLift FastGun are sold separately.
I've linked to some product demonstration videos for both kits and the turnbuckles. view full answer...
Part # TLF2022 consists of 2 TorkLift front tie-down inserts, frame brackets, and the necessary mounting hardware. The rear kit only for the 2017 Ford F-350 is part # TLF3008. Both of these are a confirmed fit for the 2017 F-350 with 6-3/4 Foot Bed, without board or step underneath truck bed and with a factory installed hitch. These will not fit trucks with factory flip-out steps that are mounted under the bed. view full answer...
The Replacement Front Turnbuckle for HappiJac Original Turnbuckle part # LC182901 is for a single front turnbuckle. If you need a single rear turnbuckle then you'll use the Replacement Rear Turnbuckle for HappiJac Original Turnbuckle part # LC182900 or the HappiJac Original Turnbuckles for Camper Tie-Downs part # LC182898 if you need all four aka a full set. view full answer...
I spoke with my contact at Brophy and she informed me that the # HSSF is made of multi-grade steel.
They actually consider it a 10way multigrade steel that includes the following grade specs:
A36 / A529Gr50 / A572Gr50 / A709Gr36 & Gr50 / CSA44W / 50W / AASHTO M270 / M270M-10Gr36 & Gr50 / ASME SA36 / SA36m-07 view full answer...
The Erickson Car Tie-Down Kit - Twisted Flat Hooks and Axle Strap w/ Ratchet # 08504-05 comes with one tie-down strap and one axle strap. view full answer...
The Curt J-Style Kayak Carrier # C18320 comes with tie downs to secure the kayak to the carrier, but it doesn't come with bow and stern tie-downs. We recommend using bow and stern tie-downs because it just further secures your kayak and helps to keep it from sliding back and forth if you have any extreme conditions while driving.
I recommend either picking up the Yakima Bow/Stern Tie-Down Ropes w/ Ratchets and Strap Loops # Y04031 or just going with our J-Style Kayak Carrier # e98878 which... view full answer...
The Camco Tarp Tie-Down Clip come in a pack of 4. The Erickson Bungey Ball Bungee Cord Tie-Downs - 12" Long # EM06650 come in a quantity of 10. view full answer...
Yes, the TruXedo Elevate Truck Bed Rack System # TX46NV does include the 4 tie downs. This is demonstrated in the parts list for the TS Rails. view full answer...
I have the right part for you. Unfortunately, the B&W Biker Bar Motorcycle Tie-Down System Base with Anchor Plates # BWMC2300 only comes with the base assembly without the clamping bar.
However, if you are looking for the complete system with a base plate and clamping bar, it depends on what type of Harley you have. Here are the different options:
- B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Softail, Dyna, V-Rod # BWMC2302
- B&W Biker Bar Motorcycle Tie-Down... view full answer...