The Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs Item # C45036 can be used in either position. The ball would just need to be installed on the other side and torqued to the proper specifications. view full answer...
You will not need to remove the Roadmaster Direct-Connect Base Plate Kit - Removable Arms
# RM-521448-5 when you explore off-road. You will want to remove the removable arms just to prevent them from getting damaged. The Roadmaster Direct-Connect Base Plate kit is heavy duty and it also fits snug against the bumper and rock guard.
If you need a tow bar I recommend the Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs # RM-522. I recommend the... view full answer...
To install the P3 brake controller # 90195 in your 2013 Jeep Wrangler Unlimited you are going to need to do a little hardwiring using pig tail # 20127 and installation kit # 5506.
The white wire you will need to connect to the negative battery terminal. Black will go to the positive battery terminal via the circuit breaker included with the installation kit. Red will connect to the cold side of the brake switch.
You will need a circuit tester such as # 3808 to test the wires on the brake... view full answer...
I spoke with my contact at Carr and she told me that the Carr Custom-Fit Super Hoop Side Steps, # CARR101241, will fit on your 2014 Jeep Wrangler with the Rock Rails, but the Rock Rails will have to be removed to install the Super Hoop side steps.
Once you have the Super Hoops installed, the Rock Rails can be re-installed in their original location. view full answer...
The Demco Classic Base Plate Kit part # DM9518320 is a confirmed fit for a 2017 Jeep Wrangler Unlimited Hard Rock Edition. In regards to compatibility with a winch, the base plates install under the bumper so I don't think a winch would be an issue. If you don't already have a tow bar picked out, the Demco Commander II Non-Binding Tow Bar part # DM9511012 would be a great option. view full answer...
If the tow bar wiring setup you have installed is a kit that activates the taillights of the towed vehicle then failure to use the brake lite relay part # RM-88400 will mean that when the Blue Ox Patriot # BLU37TR is applying the vehicle brakes it will override a blinker circuit. So the brake lights would come on but you'd have no turn signals which is very dangerous.
We try to put this message in an easy to find place but it's sometimes pretty easy to overlook. view full answer...
I am sorry to hear about the issues you are having with your Titan Chain Alloy Snow Tire Chains part # TC2326. I do however have a few ideas for you to correct this issue and the Titan Chain Multi-Arm Rubber Tire Chain Adjuster part # TCMA3 is one of them. I have spoke to Titan in the past about the tensioner chain becoming loose and they recommend two things.
The first thing they recommend is to add an additional tension like the Titan Chain Multi-Arm Rubber Tire Chain Adjuster. The next... view full answer...
The long and short of installing the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 on your 2020 Jeep Wrangler Unlimited is that you'll need to remove the front bumper (disconnecting any electrical parts connected to the bumper) and then the base plate kit mounts directly to your frame. You will need to also make some cutouts in your bumper fascia for the removable arms to fit through.
While I could copy out the entire installation instructions, anything I put here wouldn't do... view full answer...
First and foremost, if Jeep requires the battery to be disconnected while flat towing, you must follow these instructions in order to prevent damage to your vehicle.
The main reason for disconnecting the negative battery cable when flat towing is to prevent the battery from draining. When you flat tow your Wrangler, the ignition must be left in the ACC position. This would leave certain electronic components on that could drain the battery.
The benefits of using the Roadmaster Automatic... view full answer...
While we don't have a longer version of the # P960 that will work for you I was able to look at the tire size you have and I can tell it's a 12.5 inch wide size. Which for that we have the Hollywood Racks SR2 2-Bike Carrier # HRSR2 which can fit up to a 12.5 inch wide tire. view full answer...
There are two methods for installing the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR on a 2020 Jeep Wrangler. If it has the factory tow package and there is a brake controller port under the dash then you'll need the Tekonsha Custom Wiring Adapter part # 3073-P and Redarc Tow-Pro Wiring Adapter part # 331-TPH-017. If you don't have the factory tow package then you'll have to hardwire the controller.
I cannot speak specifically for another trailer wiring harness product... view full answer...
You will actually be holding the bottom part of the bracket in place when you go to tighten the knob for the Rapid Gutter Feet for Thule Crossbars # TH300R. I have attached a sample installation video on a 2018 Jeep JL Wrangler Unlimited that you can see this done starting at about the 4:00 minute mark. view full answer...
The Bestop Trektop Soft Top, # B5685335, will fit your 2008 Jeep Wrangler Unlimited. The soft top kit will include the soft top, door surrounds and tinted windows. You will not need to purchase anything else to properly install the soft top to your Jeep.
I am sending you a link to the installation instructions on the Bestop soft top kit. view full answer...
I have a solution for you, but because the stock spare tire carrier and the 3rd brake light on the Jeep JKU are all one piece, the Rampage Spare Tire Extender # RA86610 will not allow you to continue using the 3rd brake light. In order to continue using your existing 3rd brake light you would need to use a different spare tire carrier like the Bestop # B6196101 which accepts the factory 3rd brake light in the tower on the back of the carrier. This carrier will extend the brake light up... view full answer...
The Roadmaster Even Brake Portable Supplemental Braking System - Proportional Item # RM-9400 has an inertia sensor that senses deceleration to engage the braking on the towed vehicle. The towed car's brakes are activated at the same time and with the same intensity as those in your motor home. The terrain-sensing design allows braking system to adjust for braking uphill, downhill or on uneven ground to prevent false braking. view full answer...
I would be happy to help!
I reached out to my contact at Draw-Tite and to install the Draw-Tite Trailer Hitch Receiver # DT78MR you were looking at on your 2021 Jeep Wrangler Unlimited EcoDiesel you will first gently pull down on the diesel canister to get extra clearance.
You will then need to use an 18mm open end wrench to hold the bolt head on the back of the hitch while you torque down the nuts on the front of the hitch with an 18mm crows foot wrench you can pick up from a local auto... view full answer...
The installation instructions for Curt front hitch # 31432 do not include an actual full-size template for trimming the underbody deflector panel but they do include a helpful diagram that shows where to trim it. Please note this is only required if you want to re-install the deflector panel. You can leave the panel off if you prefer. view full answer...
The BedTred Custom Jeep Replacement Liner for Rear Cargo Area, Tailgate, and Tub # BTJK11R4 is made of a thermoplastic liner that is over a foam so it will do spectacularly well against dog hair. Importantly, if a lot of dog hair does happen to get on the liner, it is very easy to remove the liner and clean out the dog hair so it is a really good option.
The BedTred Custom Jeep Replacement Liner for Rear Cargo Area, Tailgate, and Tub # BTJK11R4 is a custom fit for your 2017 Jeep Wrangler... view full answer...