Expert Answers about Hyundai Palisade

• Do I Need Two Power Wires When Installing the Universal Installation Kit Trailer Brake Controller
• Yes, you will need to run two power wires to the battery when installing the Universal Installation Kit for Trailer Brake Controller part # ETBC7. The first power wire that goes to the 4-way is for the converter and that's what actually powers the trailer lights. The second power wire that goes to the 7-way is for powering a battery on the trailer if equipped. If you don't have a battery on the trailer then the second power wire is not needed but the first is.
  view full answer...


• Is Bumper Fascia Trimming Required to Install a Trailer Hitch on a 2022 Hyundai Palisade?
• Trimming of the bumper itself is not required, but trimming of the lower fascia (underneath the vehicle) is for the installation on a 2022 Hyundai Palisade of the etrailer Hitch # e95ZR. That hitch requires trimming of a 5-1/2" wide x 1-1/2" deep section for the hitch to fit. There is not technically any trimming required to install the other two hitches that fit your '22 Palisade, the Curt Trailer Hitch Receiver # C13427. That said, it is still likely you will have to make a small cut...
  view full answer...


• Installation of Redarc Tow-Pro Liberty Brake Controller on 2021 Hyundai Palisade
• The Redarc Tow-Pro Liberty Brake Controller, # RED24FR installed using the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers, # RED69FR will draw its power from from the black wire on your 7-way RV plug and directly to the negative terminal of your vehicles start battery. We have an excellent installation video created that I have linked below. The blue wire is the brake output signal that goes back to the 7 way - black will be the power source that needs to go to...
  view full answer...


• Can Factory Wiring of 2020 Hyundai Palisade be Used with Stealth Hitch
• Yes, if you wanted to use the OEM wiring of your 2020 Hyundai Palisade instead of what comes with the Stealth Hitch part # 391HYUNPALIS19T that fits it you certainly could and it would work just as good.
  view full answer...


• Are You Required to Install a Wiring Harness on a 2022 Hyundai Palisade to Install a Hitch
• Installation of a wiring harness like the Curt T-Connector Vehicle Wiring Harness # CU94FR is not a requirement to get the etrailer Trailer Hitch Receiver # e95ZR installed on your 2022 Hyundai Palisade. The wiring harness is installed to provide power to your trailer's signal lights. Since you are using the hitch for your bike rack you would not be required to install the wiring harness. If you install the hitch and mount your bike rack and find that the bikes/rack block your taillights...
  view full answer...


• How to Run Brake Controller Wiring Into Passenger Cabin of 2020 Hyundai Palisade
• According to our install crew, the wiring was ran into the passenger cab using an existing grommet in the firewall. If you open the hood, on the driver's side of the firewall you'll see a rubber grommet where the main harness enters the passenger cabin from the engine compartment. Use a utility or an exacto knife to make a small slit in the grommet, and you'll be able to pass the wire through. Before slitting the grommet, be sure to look at the area around the grommet on the other side...
  view full answer...


• Is The Installation On The Curt 4-Way # C59236 The Same On a 2023 Hyundai Palisade as Kia Telluride?
• I have linked the installation video you found for the Curt Powered Tail Light Converter # C59236 on a 2023 Kia Telluride below. When installing on your 2023 Hyundai Palisade I recommend verifying the wire functions before splicing into the wires. While these do share a lot of the same parts I have seen instances where the exact same year make and model vehicles have had different color wires for their tail light functions. A Test Light # PTW2993 can be used to test the wiring. If you...
  view full answer...


• Will Aftermarket Hitch Be Affected By 2023 Hyundai Palisade OEM Hitch Kit Recall
• Absolutely not - the etrailer Trailer Hitch Receiver # e95ZR for your 2023 Hyundai Palisade will have no issues related to the recall that Hyundai has issued for their trailer hitches. According to my research the Hyundai recall actually has more to do with their tow wiring harness than the hitch itself, just to further put your mind at ease.
  view full answer...


• Connecting The Reverse Wire Circuit Of a Stealth Hitch Towing Kit 7-Way On a 2021 Hyundai Palisade
• To connect the reverse wire of the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit # 391HYUNPALIS19T harness, the purple wire that is labeled for the reverse light circuit will need to be connected to a wire on the vehicle side connector that you plug the harness into. It looks like the wire should be yellow with a black tracer but you will want to verify that you have the correct wire with a Test Light # PTW2993 as it can change on vehicles. Once you have verified that you...
  view full answer...


• Locking the Kuat NV with the Access Ramp Adapter
• Yes! When using the Access Ramp for Kuat NV 2.0 # ANVBRB, you lift the end cap out of place, then place the mounting bracket in between, then reinstall the end cap with the locks. This way, the Kuat NV 2.0 # NV22G functions and locks the same way, you just have an extra piece on the end for your ramp. I attached a video showing the install process of the end cap mounting bracket as well as the Access Ramp itself.
  view full answer...


• Adapter for Installing Curt Echo Mobile Brake Controller on Vehicle with 4-Way
• Yes we have an adapter specifically designed for use with the Curt Echo Mobile part # C51180 and vehicles that have 4-ways with the part # ETBC7L which comes with everything needed to convert the 4-way to a 7-way and also wire up the 7-way to install the brake controller.
  view full answer...


• Does Etrailer Trailer Hitch Receiver e95ZR For 2022 Hyundai Palisade Require Bumper Modification?
• The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e95ZR does not require any trimming or modification to your bumper molding or fascia. You will, however, need to remove the passenger side plastic molding temporarily but it can be re-installed right after the receiver is installed. Nothing will look out of the ordinary as you can see in the attached photos. We do not have an installation video for this exact receiver, but I did attach an installation...
  view full answer...


• Do Blue and Yellow Wires Get Hooked Up on 4 to 7-Way with 4-Way Adapter ETBC7L for Hyundai Palisade
• Correct, the blue and yellow wires don't need to be hooked up when installing the 4 to 7-Way with 4-Way part # ETBC7L on a 2023 Hyundai Palisade if installing a wireless trailer brake controller like the Curt Echo Wireless Brake Controller part # C51180. The blue wire is for brake output but won't be used since you have a wireless trailer brake controller and the yellow wire is for reverse lights which most trailers don't have so it's also left unused.
  view full answer...


• Does Install of Curt Hitch C13420 Have Order that Bolts Need to be Torqued
• Curt does not have the same bolt order torque instructions as the Hyundai OEM hitch for you vehicle has. Maybe it would be a good idea to use that order but Curt basically found that it didn't make a difference. There is a chance that the Curt Hitch part # C13420 might have some play between it and the frame of your vehicle before the bolts are torqued. This can happen due to slightly variances in manufacturing but most of the time it's due to the hitch getting slightly bent in shipping.
  view full answer...


• Can 2020 Hyundai Palisade T-One Wiring be Used to Power Trailer Interior Lights
• Hello, I'm happy to hear that we've been able to help out with information! You are correct that the wiring on the Curt T-Connector Vehicle Wiring Harness # CU94FR for your 2020 Hyundai Palisade is smaller gauge wire (it's technically 16 but that's just 1 size away from 14 so good job!) so to add a power wire for your trailer interior lights I highly recommend installing our Wiring Upgrade Kit # ETBC7 so you have power going straight from your battery (through a breaker) back to power...
  view full answer...


• Can Install Hardware of etrailer Hitch for 2024 Hyundai Palisade Install Backwards
• Sometimes our customers find better ways to install products we carry like the etrailer hitch part # e95ZR that fits your 2024 Hyundai Palisade. It's perfectly okay to have the bolts reversed like you mentioned. Glad to have back!
  view full answer...


• Where Does The Red Wire Go When Installing Brake Controller On 2020 Hyundai Palisade?
• On your 2020 Hyundai Palisade you will want to look for several wires connected to the brake pedal switch. To verify that you are connecting the red brake controller wire (brake input) to the correct wire on your vehicle's brake wiring, you need to verify which wire coming off your brake connector has power ONLY when the brakes are applied. You can use a tool like LCD Digital Circuit Tester # PTW2992 to determine this. I am attaching an installation video that may help out. In the...
  view full answer...


• How to Locate Installers for Stealth Hitches Hidden Trailer Hitch Receiver on 2022 Hyundai Palisade
• In order to find a place to install the Stealth Hitches Hidden Trailer Hitch Receiver # 391HYUNPALIS19T on your 2022 Hyundai Palisade you will want to follow the links on the product page. Below the pictures and installation videos, and above the info and reviews, you will see "Need help with installation?" and a link that says "Locate installers near me" just below. Following the link will take you to a page where you can enter your zip code or use your current location. Once your...
  view full answer...


• Recommended Hitch for a 2024 Hyundai Palisade
• We already have them! The hitches from the 2023 model year carried over to the 2024 Hyundai Palisades. I recommend the etrailer Hitch item # e95ZR. This hitch is custom fit and bolts to your Hyundai with included hardware. The etrailer item # e95ZR is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 750 lbs maximum tongue weight. I really like this hitch because the crosstube is hidden behind the rear bumper. This leaves only the 2" receiver visible. I...
  view full answer...


• Does Installing The Curt C13427 On My 2022 Hyundai Palisade Require Any Drilling Or Trimming?
• Installing the Curt # C13427 on your new 2022 Hyundai Palisade will not require any drilling to get fully installed. With that said, there is a very minor, and I do mean very minor, trimming that may be needed to get a panel reinstalled after the hitch is in place. This doesn't actually have to be done all the time, but I did include an install video we did showing what you will need to do if trimming does need to be done on your Palisade.
  view full answer...