There is a padlock that is compatible with the Blaylock EZ Lock Gooseneck Coupler Lock # BLTL-50, but if you were referring to the Master Lock Shrouded Padlock # 37DAT, it will not fit because the Coupler Lock has a 3/8 inch diameter hole for the padlock to fit and the Shrouded Padlock fits openings of 1/2 inch diameter or larger.
The padlock which is compatible with the Blaylock EZ Lock Gooseneck Coupler Lock # BLTL-50 is the Master Lock Stainless Steel Padlock with Shielded Shackle #... view full answer...
I went out to the warehouse and grabbed the Bauer Products Compression Latch # BA87FR and Bauer Products Padlock # BA46VR and was able to get the padlock to sit inside of the handle. It is a tight fit to get the body of the padlock in the handle but it can be done.
Both the latch and the padlock only come keyed alike with other latches or padlocks so you would have to have a professional locksmith rekey the locks to have them alike. view full answer...
You can use a combination padlock on the Pivot Lock Hitch Pin # 37201031, but you would need to find one with a shackle diameter of less than .25" to fit in the slot on the latch. The Master Lock Combination Padlock # ML4688D has a thin cable shackle with a .125" diameter and would be a good fit on this hitch pin. view full answer...
To lock the pin that comes with the Curt SecureLatch Lunette Ring # CU79FR you need a padlock with a 5/16" shackle and for that I recommend the Master Lock Laminated Steel Padlock # ML1KA. view full answer...
I went out to our video studio to take a look at the XTC-2 and found that the padlock hole that can be used to secure the frame hooks of the Swagman XTC-2 Bike Rack, # S64670, into position measures right at 1/4 inches. With this measurement, I recommend going with the Master Lock Covered Solid Body Padlock with 3/16 Inch Diameter Shackle, # 131D. This lock is sold individually.
The Master Lock Covered Solid Body Padlock with 1/4 Inch Diameter Shackle, # 141T, will be too large for the... view full answer...
We do have locks that will code to your 2003 Chevrolet Silverado. For a receiver lock you want BOLT Trailer Hitch Receiver Lock # BL7018445 if you have a 2 inch or 2-1/2 inch hitch or BOLT Trailer Hitch Receiver Lock # BL7019341 if you have a 1-1/4 inch hitch.
For a padlock with a 2 inch shackle you'll need BOLT Covered Padlock # BL7018517 and the coupler lock you are looking for is the BOLT Trailer Coupler Lock # BL7025283. I've attached links to video reviews of each of these locks... view full answer...
Yes, the CE Smith Padlock Brackets part # CE26002Z-2 will fit the Replacement U-Bolt for CE Smith Spare Trailer Tire Carrier part # CE22011Z. For a lock, I recommend using the Master Lock Laminated Steel Padlock part # ML1KA. view full answer...
Yes, you can get multiple Master Lock Laminated Steel Padlock item # ML1KA keyed alike. You will want to select the keyed alike drop down option and then input as many locks as you will need and all of the padlocks they send you will be keyed alike. Make sure you buy as many as you need because you will not be able to come back later and get the same lock and key combination. view full answer...
The use of a small pad lock like the Master Lock Covered Solid Body Padlock part # 131D on the Swagman XTC-2 2-Bike Platform Rack part # S64670 would not cause any harm to the bike rack.
It can be an effective way to secure your bikes. view full answer...
I have a solution for you but the Master Lock 1-9/16" Wide Solid Brass Body Padlock with 2" Shackle item # ML140DLH can not be keyed alike. You will need the Master Lock Laminated Steel Padlock- 1-15/16" Wide - 3/8" Shackle - Blue - Keyed Alike item # ML312KA. These have an option to be keyed alike right above the add to cart button. view full answer...
The specifications of the Master Lock Laminated Steel Padlock part # ML101 are inline with what is required to lock the coupler portion of a Reese Goose Box Adapter like part # RP85FR which you can see in the attached photo. That said, if you have tried to use this lock and found that it does not work due to being over-sized then I recommend the Master Lock Brass Padlock part # ML4140LH which also meets the specifications of the Reese Goose Box Adapter but is not as over-sized as the former. view full answer...
You can lock your spare tire to the CE Smith Spare Tire Carrier # CE22007Z-11050-2. All you need to do is add the CE Smith Padlock Brackets for Spare Tire Carriers # CE26002Z-2 which will allow you to use a padlock, the Master Lock # ML1KA to lock your spare tire.
These brackets simply thread onto the carrier so you can use the padlock to help secure the tire.
I've added links to video reviews of both the carrier and brackets for you to check out. view full answer...
The BOLT Covered Padlock - 2" Shackle - Codes to Late Model GM Key # BL7018518 is a confirmed fit for your 2011 Chevy Silverado ignition key. view full answer...
Yes, as long as the ladder is not wider than 6-1/4 inches it will work for an extension ladder. Keep in mind that the weight capacity is 75 lbs per ladder as well. Most 28 feet and 32 feet extension ladders fall under this weight limit.
This ladder rack does come with bungee cords to secure the ladders to the rack, but to help deter theft I recommend using the RockyMounts SteelBraid Cable Lock # RKY3850 with the Master Lock Padlock # ML1KA. The Padlock can be keyed alike if you decide... view full answer...
The Master Lock 970DPF will not work with the Blaylock EZ Lock Trailer Coupler # BLTL-33; instead you would want to use the Master Lock Padlock # ML40D. view full answer...
Yes, the CE Smith Padlock Brackets for Spare Tire Carriers item # CE26002Z-2 you were looking at will fit the CE Smith Spare Tire Carrier for Trailers item # CE22007Z-11050-2 and item # CE22011Z-11050-2. So if you purchased one of those two spare tire carriers you will have no compatibility issues. For a lock, I recommend using the Master Lock Laminated Steel Padlock item # ML1KA.
We offer both components and a lock as well. It is the CE Smith Spare Tire Carrier - Locking - Steel - 4-Lug... view full answer...
Based on my research, PJ trailers outfit their trailer with a Bulldog gooseneck coupler. As long as your trailer still has a Bulldog coupler, you will want to use Baylock EZ Lock Gooseneck Coupler Lock - Bulldog/Stallion/Superior/T.E.M. Gooseneck Couplers.
For just the coupler lock without an included padlock, you will want to use part # BLTL-50. For the coupler lock with an included padlock, you will want to use # BLTL-50-40D. If you want the coupler lock, the set screw lock, and padlocks... view full answer...
The Ram OEM fifth wheel can be locked though there is not a specific lock designed for it. The Reese OEM 5th Wheel Hitch # RP30918 will need to be locked with a padlock such as the Master Lock Padlock # ML1KA in the place where the pin and clip are at the handle. view full answer...
The Demco 5th Wheel Rail Adapter for Ford OEM 5th Wheel Towing Prep Package - 25,000 lbs # DM6175 does have the pin quick release that are 0.313 x 1.00 inch. Demco doesn't make a specific part for this to lock it but you can use a padlock with compatible diameter shackle for that application. The Master Lock Covered Solid Body Padlocks - 1/4" Shackle Diameter (2 Pack) # 141T should work well for your application. view full answer...
Yes, the Replacement Handle Latch for Cam-Door Lock part # 158-102 will work with a puck style lock like the Master Lock Stainless Steel Padlock part # ML40D so long as the shackle does not exceed 1/2" diameter. I have attached a photo of this for you. view full answer...
Go To Results