It looks like you purchased a Draw-Tite hitch from us before for your 2010 Mazda 3. If you are still using this hitch, then the Yakima HoldUp 2 Bike Rack # Y02445 is not compatible with Draw-Tite Class I receivers. Draw-Tite hitches have a weld-stop on the inside of the receiver that prevents Class II hitch accessories from being able to fit.
One of our best bike racks that will fit your Mazda 3 is the Kuat Transfer 2 Bike Platform Rack # KU74FR. Just like the # Y02445, it is a wheel... view full answer...
In order for the Thule Echelon Roof Mount Bike Rack, # TH518, to fit the Thule AeroBlade bars, you will need the Thule Xadapt9 Aero and Xsporter Load Bar Adapter, # THXADAPT9. I have included a link to the installation details for you. view full answer...
The SportRack Semi-Custom Roof Rack # SR1010 that you referenced is a confirmed fit for your 2010 Mazda 3 Hatchback so long as it does not have any existing roof side rails or crossbars (in other words as long as it has what we call a naked roof).
This sturdy cost-effective rack employs 50-inch square crossbars that offer excellent compatibility with a broad range of rack-mount accessories such as bike or kayak carriers and cargo boxes. This rack includes locks to secure it to your vehicle.... view full answer...
The anchor points will be easy to find. In your vehicle gutters, you will see 4 rectangular covers. These hide the anchor points. There is no cutting required on the car. view full answer...
You are able to use the Hollywood Racks RV Rider Bike Rack # HLY64FR behind your 2015 Mazda 3 Hatchback with the EcoHitch Hidden Trailer Hitch Receiver # 306-X7305. The 350lb minimum weight rating is required when using the bike rack behind a 5th wheel camper. This is required on a 5th wheel as they bounce more than other RV's causing a more violent ride behind a 5th wheel than you will experience behind your Mazda 3.
I do recommend installing the T-One Vehicle Wiring Harness # 118405... view full answer...
If your 2013 Mazda 3 Sedan has a Rhino Rack aero bar roof rack installed on it currently like with the part numbers # RRVA118B-2, # RRRLKVA, and # DK289 the Ladder Mounting Kit # SEGLK2B that you referenced would fit and work great. This only fits the Rhino Rack aero bar profile so it would not work on a different rack. view full answer...
You actually won't need any type of mount kit to attach the Thule Tepui Foothill Rooftop Tent # TH37HJ to your Yakima roof rack.
The # TH37HJ will fit directly on Yakima crossbars with the parts included with the tent. view full answer...
Yes, the Thule OutWay, # TH45Jv, will fit a 2088 Mazda 3, five door. This is also my top pick for a trunk mount rack because the retractable cables make it easy to install and remove from the vehicle. I have included some informational links of the rack for you.
If you will be carrying women's, children's, or alternative frame bikes I recommend using the bike adapter bar, # TH982XT, for greater ground clearance and to carry the bikes more level. I have included a link to a video that shows... view full answer...
Even with a Class I, 1-1/4 inch trailer hitch receiver like the Draw-Tite # 24816 that fits your 2007 Mazda 3, you can absolutely use the Thule T2 Pro XTR 2-Bike Rack # TH23JV.
The XTR is rated for use with a Class I hitch, and is one of the premier racks in the industry because of how easy it is to use, its durability, and its optimal bike spacing to keep your bikes protected. It even has included hitch and cable locks to help protect the investments you made in the rack and your bikes. view full answer...
That is a rather wide crossbar, one carrier that is compatible with wider crossbars is the Yakima Jaylow # Y04073. This one doesn't wrap all the way around your crossbars but squeezes the crossbar from each side. This is compatible with a 3-1/2" crossbar width and can be used with one or two kayaks! It comes with one complete strap kit but you'll need another set # Y04031 to get two tied down properly. The Thule Compass # TH890000 wraps around the crossbars and those type of mounting systems... view full answer...
Yes we do have 1-1/4 inch to 2 inch hitch adapters that would fit the Class I hitch part # 24912 that you referenced with the part # HTAD . You should note that these do cut the capacity of the hitch they are installed in by 50 percent. view full answer...
I have a solution for carrying 3 bikes with your 2016 Mazda 3 hatch back but the Class I hitch can't handle carrying more than 2 bikes due to the added weight and leverage of the third bike that stick out further.
You'd instead need a 2 inch hitch like the EcoHitch part # 306-X7305 which would easily handle a three bike rack like the Swagman Trailhead part # S63365. view full answer...
Thule has tested their 2 bike model of the Passage Trunk Mount Bike Rack on a 2007 Mazda 3, and found that the majority of the weight of the rack and the bikes is supported by the bumper and is not suspended from the spoiler located on top of the rear hatch lid.
Therefore, as long as the 35 lbs per bike maximum capacity isn't exceeded and the rack isn't used off-road, the rack will not damage your vehicle.
If you'll be transporting women's bikes or bikes with sharply-angled top tubes,... view full answer...
The Swagman kayak carrier, # S65148, could fit the Rhino-Rack aero bars but it would not be the best fit due to the designed of the mounting hardware as shown in the included picture.
I recommend the Rhino-Rack J-Style kayak carrier # S510 which is going to be a better fit. I have linked a video review for you.
These carriers are meant to carry one kayak. To carry 2 you would need to use 2 sets of these carriers. view full answer...
We do not carry the Allen brand of bike racks but we do offer some anti-rattle options that may work for your needs but this is going to depend on how the bike rack pin hole and shank are configured.
If the pin hole on your bike rack is not threaded, and the shank on the rack itself is hollow, you could use a basic anti-rattle device such as the Trailer Hitch Anti-Rattle Kit, # F-315, that you mentioned.
If the pin hole is threaded or the bike rack shank is solid, we do not offer a... view full answer...
Yes, the Saris Bones bike rack # SA801BL will fit your 2017 Mazda 3 hatchback with the spoiler but you will need to add and use Hatch Huggers # SA3035 in place of the side straps. Also the use of the Hatch Huggers reduces the bike rack capacity to 2 bikes.
What I recommend for 3 bikes is the Yakima FullBack # Y02633. I have included a link to a video review of this rack for you. It costs a little more but in my opinion it is a better rack compared to the Bones. The FullBack also includes... view full answer...
Yes, this Sportrack Vista XL Cargo Box # SR7018 will work on Thule Square Load Bars # THLB50 like what you have on your vehicle.
This cargo box has a capacity of 100 lbs, you will also need to know the weight capacities of the rack you have on your vehicle as well as the capacity that the roof of your vehicle has and then go with the lowest rated component as your overall weight capacity. view full answer...
We do! The trailer hitch you're looking for comes from Draw-Tite:
- Draw-Tite Sportframe Trailer Hitch Receiver # 24982
This will give your 2022 Mazda 3 Sedan a Class I hitch with a 1-14" receiver. While this does give you a hitch receiver just be mindful of the weight ratings of your vehicle and the hitch itself. If you were to use this for a bike rack you need to avoid loading more than 2 bikes on a Class I hitch so something like the Kuat Beta Bike Rack # B202-114 that only weighs... view full answer...
On your 2010 Mazda 3 measure from the center of a front fixed mounting point to the center of the one behind it. If that measurement is 20 inches to 37 inches then you will be able to use Thule basket # TH859XT with Rola roof rack 59833. view full answer...
I would be happy to help you verify those parts are compatible. Whether or not they fit on your 2013 Venture Tandem axle boat trailer depends on your spindle size. The Kodiak Disc Brake Kit - 10" Hub/Rotor item # K2HR35D has a 5 on 4-1/2 lug pattern and is rated for 3,500 lbs. It uses an inner bearing of # L68149 and an outer bearing # L44649. This works with the Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs item # DBRKHW35EZ. You will want to confirm the bearings... view full answer...
Go To Results