bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Keystone Cougar Fifth Wheel


  • How To Determine Fit of the 18 Foot Solera 18V Power RV Awning
  • The Solera 18V Power RV Awning part # LC730510 will fit any trailer with 69" of space open on the side of the trailer wall straight down (see photo) and then at least 2-1/2" of clearance between the awning rail and top of entry door. If your trailer meets these two criteria which it should then you will have no issue installing the above awning. I don't have any of these specs for you trailer so you will need to measure this for yourself but if you don't have enough space for the above...
    view full answer...

  • What Was Fixed With Current Version of Lippert Correct Track
  • The previous generations of the Correct Track had some issues with brackets bending but the current generations like the single axle part # LC87120 and tandem axle # RR23QX have had all of that addressed and fixed.
    view full answer...

  • Replacement Stereo Option For a 2007 Keystone Cougar 278EFS
  • We offer replacement RV stereos. Since RV stereos are not a "fitguided" part, I am not sure what stereo you currently have that needs to be replaced in your RV. The Jensen RV Stereo w DVD Player # JWM60A has cutout dimensions of 9" wide x 6" tall x 5-1/2" deep. If your current cutout is about that size, then the # JWM60A would work. Or if you let me know what stereo you currently have and what features you want, I would be happy to help recommend the stereo best suited for your needs.
    view full answer...

  • How Much Work Is It To Swap Out A Dual Water Inlet With The Valterra lockable Dual Water Inlet
  • The Valterra Lockable Dual RV Water Inlets # A01-2000VP is very similar in size but without knowing the actual cutout hole dimensions it's not possible to know if you'll need to make modifications. This dual inlet box requires a 5-7/8" wide x 4-3/4" tall cutout hole. Worst case scenario you would have to trim the cutout hole a bit larger to fit this new inlet box in place. You'll want to use butyl tape # AL28FJ on the mounting flange and non-sag sealant # 344270341437-1 around the outer...
    view full answer...

  • Will the Landing Gear part # RVLG-8HDL Fit my 2007 Keystone Laredo
  • The Landing Gear Set w/ Handle part # RVLG-8HDL is a very common replacement. The biggest thing to check is the distance from the outside to the outside of the weld stops or inside to inside of the attachment straps to ensure that it measures 17.5". If it does this will be a good fit for you. This kit does come with the gear box attached but it can easily be removed if you choose to attach your own. If you have different measurements pleae get the model number off of the landing gear and...
    view full answer...

  • Replacement Pin Box for a 2022 Keystone Cougar 5th Wheel
  • Thanks for the information! I just spoke with my rep at Lippert and your 2022 Keystone Cougar has a 1621 pinbox. To replace it with a Curt Flex Air you will want item # LC328492. I have linked an installation video below.
    view full answer...

  • Are Shocks Still Needed When Adding a Shock Absorbing Equalizer to a Triple Axle 5TH Wheel Trailer?
  • As your 2005 Keystone Raptor 3212DS is a triple axle you will need a kit like the MORryde Rubber Equalizers for Triple Axle Trailers # MR39ZR. The Lippert Road Armor # LC696740 will only fit on tandem axle trailers. I do recommend also installing the Wet Bolt Kit # MR86ZR with the equalizers. This will allow the suspension to move more freely. While the equalizers and wet bolts above will allow the suspension to absorb some road shock, adding shocks will still improve the overall ride...
    view full answer...

  • Does The 901 Series Light Bulb Share the Same Base as the 921?
  • The 901 bulb shares the same T-5 wedge base as the 921 Bulb # VA0415-00. You will want to verify with the LED bulb manufacturer to ensure the bulb is compatible to replace your 901 bulb as there may be a issue with the overall size of the bulb itself.
    view full answer...

  • Can Spring Seats be Put on Opposite Side of Axle For Lift
  • You can put the spring seats/saddles on the opposite side of a round, standard straight axle to achieve lift, and to do this you would need what is called an over/under kit. The correct fit will depend on the diameter of your axle: - 2-3/8" Axle: Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 - 3" Axle: Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00 This moves your trailer's leaf springs to the top of your axle and lifts your trailer approximately the same...
    view full answer...

  • Correct Furrion Power Adapter for a 2021 Ram 2500
  • Yes the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera # FR87PR is the correct adapter for your 2021 Ram 2500. This adapter will provide you the extra power required for the Furrion Observation System to function.
    view full answer...

  • Can The Roadmaster Dual Hitch Receiver Adapter Tow A Motorcycle Trailer And Haul E-Bikes
  • The Roadmaster Dual Hitch Receiver Adapter for Tow Bars # RM-077-2 is not recommend for use with a trailer so you'd be voiding any warranty towing your motorcycle trailer with it. It also only has a 400lb tongue weight so you'd need to make sure that the weight of the bike rack, bike, and tongue weight from the trailer doesn't exceed 400lbs. There isn't a 2-1/2" version of this adapter but a stacked receiver might be the better option for you. The Gen-Y Phantom X Adjustable 2-Ball Mount...
    view full answer...

  • Recommended Dual Motor Landing Gear Jacks For A 2005 Keystone Cougar 5th Wheel
  • The Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 you were looking at is a perfect option since you're wanting a dual motor system. As far as compatibility goes, you will want to measure where your weld-stops sit and see if they match up see if you can easily just slip in the new landing gears. If not you'll have to grind off your old brackets and weld on the included brackets. I've attached a dimensional drawing of the weld-stops and a quick wiring diagram to aid you with...
    view full answer...

  • Non Friction Door Hinge that fits 2022 Keystone Cougar Half Ton
  • The replacement hinge part # LC198295 is what you are looking for as it's not a friction hinge that stops the door from moving and is correct size for your 2022 Keystone Cougar.
    view full answer...

  • Tekonsha Prodigy Brake Controller Shows S.H Code
  • If the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 shows a short in the system in idle conditions then you most likely have a short on the blue brake output wire. I recommend to inspect the blue wire from the brake controller to the back of the vehicle at the 7-way for any frayed or wire insulation cracks. If you find damaged wire you would need to replace it with part # 10-1-1. If the wiring is older, I recommend to check the 7-way plug on the vehicle side and trailer side...
    view full answer...

  • Replacement Hub & Drum And Electric Brakes For 2019 Keystone Cougar 315RLS
  • Thanks for all that info, that was awesome. And for your 2019 Keystone Cougar 315RLS with a 5,200 lb axle, hub with 6 on 5-1/2" bolt pattern, and Nev-R-Adjust electric brakes, here is exactly what you need: - Dexter Trailer Hub and Drum Assembly # K08-201-98 - Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 - Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12
    view full answer...

  • Will Classic Accessories PolyPRO 3 Deluxe 5th Wheel Cover # CA80-300-203101-RT Fit My 2021 Keystone
  • With the research I did, I found that your 2021 Keystone Cougar 364 BHL has a length of 39' 2". The Classic Accessories PolyPRO 3 Deluxe Extra Tall 5th Wheel or Toy Hauler Cover - XT Model 7 # CA80-300-203101-RT would be a little too large. I recommend the Classic Accessories PolyPro III Deluxe Extra Tall 5th Wheel Cover - Model 6 37-41' # 052963750638 because it fits trailers from 37' to 41' and will give you a more snug fit on your trailer.
    view full answer...

  • Will VueSMART RV and Trailer Backup Camera Work on 2022 Keystone Cougar 5th Wheel
  • Yes, you can use the VueSMART RV and Trailer Backup Camera part # HM34FR on your 2022 Keystone Cougar 5th Wheel. That said, I looked up some photos of the upper rear center clearance lamps and they are oval, not rectangular like what the above offers a mount for. Therefore, you'd need to remove the upper portion of the bracket and direct mount the camera to the trailer but this is all covered in the instructions.
    view full answer...

  • Recommended Replacement For A Dometic Rooftop Unit On A 2015 Keystone Cougar 313RLI Fifth Wheel
  • Since you stated that your 2015 Keystone Cougar 313RLI fifth wheel has a Dometic AC system you'll just need the Advent Air Replacement RV Air Conditioner for Dometic Setup w/ Start Capacitor - Black # ACDOM150B. This unit comes with a wiring harness adapter to allow it to plug right back into your Dometic system for an easy installation. I've attached a video below where Dave goes over the installation of an entire Advent system so you can watch the part where he installs the rooftop...
    view full answer...

  • 5th Wheel to Gooseneck Adapter For 2021 Keystone Cougar 29RKS Half-Ton 5th Wheel Trailer
  • Your 2021 Keystone Cougar 29RKS Half-Ton 5th wheel trailer has a Lippert 1621 pin box, so the correct adapter is the following: - Gen-Y Hitch 5th Wheel to Gooseneck Pin Box # GY58GR I also wanted to add that if you don't have safety chains, you'll need part # GY49GR.
    view full answer...

  • Recommended Fold Down Steps For A 2010 Keystone Cougar Fifth Wheel Trailer
  • We have just what you need with the MORryde StepAbove RV Steps # MR98RR. These steps fit a door width of 23-3/4" - 26-1/4" and an entry height of 30" - 33-1/2". These steps have a simple twist handle to unlatch and fold down the steps. There are pull pins in the hinge of these steps to allow you to remove the steps when in close quarters that won't allow for the steps to fold down. I will say having tested these out that the pull pins are in pretty tight and might be a bit of a challenge...
    view full answer...