We have GCH camera kits that are designed to be used with the OEM monitor of your 2022 Ford F-450 with the part # 3460002 for if you have the 4.2 inch monitor or the part # 3460001 for if you have an 8 inch monitor but the # 3460003 is designed for use with aftermarket monitors that have RCA inputs.
The kits mentioned do have the switch you mentioned wanting that allows you to switch between cameras. view full answer...
Your 2010 Winnebago Access 29T is prewired for the Voyager WiSight backup cameras. The Voyager WiSight Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # ASA24YR will be the backup camera system that will fit your trailer.
I do recommend consulting your owner's manual to confirm your Winnebago is indeed prewired. view full answer...
Since your 2021 Ford F-450 has the RetraxPRO tonneau cover with the T-Slot rails you'll have to use a different ladder rack as the Thule Xsporter Pro Mid Overland Truck Bed Rack # TH34RR is for truck beds that don't have anything installed on the bed sides.
For a similar ladder rack we have the Yakima OutPost HD Overland Truck Bed Rack which comes with either 68" Long HD Bars # Y01152-58 or 78" Long HD Bars # Y01152-59. To fit these with that T-Slot you're also going to need the Adapter... view full answer...
If your 2001 Ford F-450 features a flat or dump bed, the Buyers Products Hitch Plate Bumper # 3371809055 will fit and work well. This is designed for cab and chassis trucks like yours with the nominal 34" frame width. Hardware is not included with the hitch but this is something you can obtain from a local hardware store. Please note that Buyers states the hitch should be both welded and bolted to the frame, with at least two 3" welds per side.
I have attached a short video review that... view full answer...
The install of the Demco Ford fifth wheel rail kit adapter part # DM6175 that fits your 2023 Ford F-450 with any bed liner would require modifying it. We don't have a Weathertech liner for your truck but unless it has basically the entire puck area cut out (it wouldn't) it would need to have that area trimmed back. view full answer...
Yes. You will want the Pop-In Ball for Reese Elite Series Factory Ford and Factory Ram Gooseneck Hitches - 3" Ball # RP19314 along with the Safety-Chain Loops for Reese Elite Series Under-Bed Gooseneck Trailer Hitch - Qty 2 # RP58468 for your OEM pucks. view full answer...
The specifications of the Master Lock Laminated Steel Padlock part # ML101 are inline with what is required to lock the coupler portion of a Reese Goose Box Adapter like part # RP85FR which you can see in the attached photo. That said, if you have tried to use this lock and found that it does not work due to being over-sized then I recommend the Master Lock Brass Padlock part # ML4140LH which also meets the specifications of the Reese Goose Box Adapter but is not as over-sized as the former. view full answer...
The Brophy Stake Pocket Tie Downs Item # TDSF and the HappiJac Qwik-Load Upgrade Kit for Standard Turnbuckles - Qty 4 Item # LC182894 are both compatible with the 2008 Ford F-450 Super Duty. Keep in mind the stake pocket tied down do require drilling to get them installed. You will also need the HappiJac Original Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 Item # LC182898 to work with the Quick-Load Turnbuckles. view full answer...
You actually have a couple options for the 2020 Ford F-450 Super Duty factory puck system. I recommend the Curt Safety Chain Loops for Factory Ford Underbed Gooseneck Trailer Hitch - Qty 2 Item # C60691. They are going to provide a tighter fit. You also have the Safety-Chain Loops for Reese Elite Series Under-Bed Gooseneck Trailer Hitch - Qty 2 Item # RP58468 which are compatible with the 2011 and newer Ford Super Duty trucks. view full answer...
It sounds like you have the old version of the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers part # AL88399 which only has two holes on the lower bracket instead of the one you need with three holes. If you used our site for the fit info and then purchased elsewhere you could very well run into this issue as other manufacturers will keep old stock and may not be aware of this issue but I can confirm if you order from us, you will receive the new lower... view full answer...
The cutout dimensions I can see for the JWM90A is 6.3" D x 10.9" W x 2.85" H. The Furrion RV Stereo # DV1230BL is a double-DIN with a 5-1/2" D x 6-15/16" W x 4" H cutout hole requirement so you'll have to increase the size of your cutout hole a bit height-wise for it to fit but it will still be a great replacement option.
The closest option would be the Furrion RV Stereo # DV3300SBL, which is a Single-DIN with a cutout requirement of 7.0625" W x 2" T x 6" D. view full answer...
Yes, the Custer Lite-It Wireless LED Agricultural Tow Lights # LIW-AGKIT-SG that you referenced does use 2-1/2 inch standard lights like the # MCL59AB. view full answer...
While you wouldn't be able to weld another 2" receiver on, there is a solution for your 2020 Ford F-450 to use your hitch-mounted flag pole mount with the MORryde Hitch Mounted Trailer Stabilizer for 2" Trailer Hitches # MR22AR.
What you would do is add a TorkLift hitch that has two receivers, with the bottom being a 2" receiver and the top being a 2-1/2" receiver, though it does come with a 2" adapter sleeve. The correct fit for your '20 F-450 is the following:
- TorkLift SuperHitch... view full answer...
The correct underbed installation kit for your 2019 F-450 Super Duty is the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BWGNRK1116-5W which is going to allow you to install the B&W Companion 5th Wheel Trailer Hitch # BWRVK3500-5W.
The B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package # BWRVK3300 you referenced would only work if you had the factory prep package with pucks in the bed of your '19 Ford F-450. Since you asked about the correct... view full answer...
The correct Gooseneck hitch and installation kit for a 2010 F-450 with 8 bed, Crew cab, DRW, 4 x 4, is the Reese Gooseneck, # 9460-49.
I have linked an installation video of a Hide-A-Goose installation on a 2008 F-250 that should be similar to the installation on your F-450, but the install kit is different.
You may also be interested in wiring for the bed of your 2010 F-450. The in bed wiring harness, # PK11893-11932, will plug inline with the factory wiring and install in the bed of... view full answer...
There is not an option at all for a 25,000 lb B&W Companion for the standard rails, just for the OEM prep packages. So for your 2008 Ford F-450 you will need the 20,000 lb B&W Companion 5th Wheel Trailer Hitch # BWRVK3500-5W and Custom Underbed Installation Kit # BWGNRK1108-5W.
If you need a 5th wheel wiring harness the correct fit is the 5th Wheel / Gooseneck T-Connector # PK11893-11932. view full answer...
Yes, you can replace just the base of your B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package - Dual Jaw - 20,000lbs # BWRVK3700 with the Replacement Base for B&W Companion OEM 5th Wheel Trailer Hitch for Ford Super Duty # BWRVB3300 to fit your new 2022 Ford F-450 Super Duty and just reuse the same hitch head. view full answer...
There is a specific wiring harness for your 2008 Ford F-450 Super Duty that is a better fit than the 20023 wiring harness. You will need Curt 5th Wheel and Gooseneck Wiring Harness item # C56000. For this harness, your vehicle will have to have a factory tow package, which you have indicated that your truck does.
The harness plugs in between the the OEM wiring harness and the factory 7-Way connector. You will still be able to use the factory 7-Way with this harness installed. I have included... view full answer...
The correct Roadmaster Rear Anti-Sway Bar for a 2017 Ford F-450 is part # RM-1139-190, not part # RM-1139-193 which is for a Ford F-350. The Roadmaster Rear Anti-Sway Bar is an excellent option to improve stability while hauling an in-bed camper so you made a great choice and it will be a bolt-on, easy to install option. view full answer...