What Backup Camera Will Fit My 2010 Winnebago Access 29T

Question

Question:

Do you have a Backup Camera that would work on my Ford Winnibago?

asked by: Judy

1

Helpful Expert Reply:

Your 2010 Winnebago Access 29T is prewired for the Voyager WiSight backup cameras. The Voyager WiSight Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # ASA24YR will be the backup camera system that will fit your trailer.

I do recommend consulting your owner's manual to confirm your Winnebago is indeed prewired.

expert reply by: Thomas M

1

Answer 1

I checked with Furrion and the 7 inch and 5 inch monitor version of the Furrion observation system #FOS05TASF use part #FR79SR. The smaller 4.3 inch size use the part #LC776462. The ball of the #FR79SR is 0.85" or 21.59mm and the ball of the…

view full answer...

Answer 2

The Replacement Voyager WiSight 2.0 Wireless RV Backup Camera w/ Night Vision for Prewired System #ASA74YR, which is the WVSXP43 camera, is the camera that comes with the: -Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for…

view full answer...

Answer 3

The plugs are different, but if you like you can still use the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen #FOS05TASF. To do this you would need to wire it yourself as opposed to using the…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

view full answer...

Answer 10

The most likely cause of the "no signal" error you are receiving with the Furrion Vision S Wireless RV Backup Camera System part #FOS43TASF is due to an interruption on the camera's power wire. Make sure that the camera is receiving…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

What Backup Camera Will Fit My 2010 Winnebago Access 29T

Product Page this Question was Asked From

Continue Researching