I do have a Class III hitch that fits your 1987 Ford F-150 with a 37-1/4 inch frame, however, it's not a Curt.
Take a look at the Draw-Tite Max-Frame Trailer Hitch Receiver Class III # 75038. This hitch receiver has a towing capacity of 5,000 lbs and a tongue weight rating of 500 lbs, which is more in line with the towing capacity of your F-150. It also features a concealed crosstube design, just like the Curt # 14001. That being said, Draw-Tite hitches are not manufactured in the USA.
If... view full answer...
On trailer hitch # 75038 it measures approximately 9-1/4 inches from the bottom of the truck frame down to the center of the receiver. The hitches for the 1988 Ford F-series trucks are designed for stock models. I can't say for sure if any would fit with the modifications to the rear of your truck.
If the measurements for the hitch don't work out another option is to use a weld-on hitch and have it installed by a qualified professional welder. I have linked the weld-on hitches that we carry. view full answer...
The grease seal used along with an L44649 outer bearing and L68149 inner bearing is a 10-19, part # RG06-050 which measures 1.719" inner diameter x 2.565" outer diameter. view full answer...
Correct! TW stands for tongue weight and WD stands for Weight Distribution. I have a class V hitch for your 1990 F150,F250 or F350. The Curt Class V # C15300 will fit your 1990 Ford. This hitch has a max gross trailer weight of 16,000 lbs and a max GTW when used with weight distribution of 17,000 lbs. It has a Maximum tongue weight of 2,400 lbs and the maximum TW when used with weight distribution is 2,400 lbs. I've included an installation video for you to watch that will help you with... view full answer...
First we will need to determine which style F-Series Super Duty your 1990 truck is. For a Cab and Chassis model you will need the Curt Trailer Hitch Receiver # C14082. For a Super Duty with Deep Drop rear bumper you will need the Curt Trailer Hitch Receiver # C15511. And Finally for the Super Duty with standard step bumper the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25122. All 3 of these will require drilling into your frame for a non-weld installation. Each will require you to position... view full answer...
I may have an option for you but Flex-A-Lite does not have a proper belt driven fan for the 1984 Ford F-250.
You will need Derale Thermal Fan Clutch part # D22052 and one of the following fans depending on how much space you have available.
17" Fan part # D17117
18" Fan part # D17118
19" Fan part # D17119
20" Fan part # D17120 view full answer...
There are a couple of things to consider to determine the correct under bed frame brackets for your 1991 Ford F-250 long bed.
When it comes to rails there are 2 basic types out there: 10-bolt and 4-bolt rails. The 10-bolt rails will have mounting holes on the side flanges of the rails. The 4-bolt rails will only have holes on the top, center parts of the rails.
If you have the 10-bolt rails then you would need installation kit # RP30439. If you have 4-bolt rails you will need installation... view full answer...
The cushion inside of the Convert-A-Ball cushioned ball mount # AMSC4 would have only a slight affect on the surge coupler on your trailer. You may not even notice it. The cushion is very dense and the more pressure that is put on it the firmer it gets. It would take more force to compress that cushion than to actuate the surge coupler.
Cushioned ball mount # AMSC4 has a 2-3/4 inch rise or 4 inch drop but there are other options if you need a different rise or drop to tow the trailer level:
#... view full answer...
As long as the door on your 1991 Jamboree is between 1-1/4" and 1-1/2" thick and the cutout is 2-1/2" wide x 3-1/2" tall up to 3" wide x 4" tall, you'll have no issues using the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Black # 295-000019. To fill the space in the door, you'll likely just want to use some sort of foam insulation to keep cold air from entering any gaps and into the coach. If your cutout is larger than the above mentioned dimensions, you'll need... view full answer...
Your 1988 Ford Hitch # C15300 has a Class V 2" hitch receiver. For a Class III, IV, and V trailer hitches, you will need to use a 5/8 inch diameter pin such as # e98881. If you are using this hitch with accessories and want an anti-rattle hitch lock, then # e99047 is a great option. view full answer...
As you stated, Thule has not tested this compatibility and neither have we. If I understand your measurements correctly it may require trimming or drilling the underside of the bed lip for a correct fit. I've attached a photo with the measurements for the clamps utilized on the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack - Aluminum - 450 lbs - Silver # TH500XT.
The other elements will be compatible and the loadbars which are 72" long x 3-1/2" wide x 1-1/2" tall will... view full answer...
We have a chrome plated rear bumper that is a confirmed fit for your 1988 Ford F-250 and comes with the installation hardware needed.
It's the Westin Fey Surestep Rear Bumper with Custom Installation Kit, part # 21002-92230. It has 3 hitch ball holes with a towing capacity of 8000 pounds and tongue weight capacity of 800 pounds. I've linked to a video review of it below.
The one that you referenced, part # 76001, will not fit your F-250. view full answer...
I have another option but the DeeZee # DZ2017 is 60" long which is designed for a Regular Cab truck and will not work on your 1990 Ford F-250 SuperCab.
I recommend the Westin Signature Series Round Nerf Bars # 25-0625 are 53" and are a confirmed fit for your 1990 Ford F-250 SuperCab. The Westin # 25-0625 are a great choice due to their corrosion resistant black powder coat finish, and since they are the only full length nerf bar we offer that does not require drilling to be installed on... view full answer...
If your existing lights have mounting holes that are 2 inches apart from the center of the holes, then the Optronics LED Side Marker # MCL13A2B would work just fine as a replacement. view full answer...
I contacted Curt and as long as the gas tank does not cover the frame at all on the 1988 Ford F-150 the Curt Trailer Hitch Receiver part # C15300 will fit the truck with the dual gas tanks. I have attached an installation video for your reference.
If you need to replace the trailer wiring, I recommend part # 118316 for a 4-pole connector. view full answer...
The mount kit you need to use the Detail K2 Summit II Snowplow # K2SUMM8826 on your 1990 Ford F-250 is the part # K281516 which is a custom fit for your truck's frame designed for mounting this plow. view full answer...
The only 5th wheel hitch that we have that is compatible with your 1989 Ford F250 Super Cab 3/4 T 4x4 8 ft. bed with lift springs and uses below bed rails is the B&W Companion 5th Wheel Trailer Hitch # BWRVK3500-5W.
If you mean Overload springs when you say lift springs then the correct below bed installation kit is the Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches # BWGNRK1110-5W.
If you do not have Overload springs then the correct install kit is the Custom... view full answer...
If your 1989 Ford F-150 has a standard or step bumper AND the frame measures 37-1/4 inches from left to right (outside to outside) then you can use trailer hitch # 75038. If your truck has the deep drop bumper then you will need # 41504 with adapter # 01685. I have linked instructions for each of these hitches for you.
If you plan on doing some towing I also recommend etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, hitch pin with clip, and a storage... view full answer...
For your 1989 Ford F-250 you want to use the Stromberg Carlson 100 Series 5th Wheel Tailgate # VG-100 instead of part # VG-97-100 as the part that you referenced fits newer models Ford pickups.
Attached is a photo a customer took of this tailgate on their 1996 Ford F-250 that you can reference. view full answer...
The Brophy Camper Tie Down # TDSF is a compatible fit for your 1989 Ford F-150/F-250/F-350 full size truck and will fit most campers up to 8 feet in length. I have included a link to the instructions for proper installation.
I also recommend the Brophy Camper Tie Down Hardware Package # TDHP for use with the Brophy Tie Downs. They have a capacity of 3000 lbs and I have included a link to the instructions for the proper installation of this product. view full answer...
Go To Results