From the research I have done the CIPA Clip-On Towing Mirror, # 7070, will fit on your 2011 Chrysler Town and Country. This is a universal fit towing mirror and will fit on almost all car, truck and van mirrors as long as they have a separate plastic housing.
This mirror clamps on to the top and bottom edge of the plastic housing and uses two rubber straps to wrap around the back of the mirror for a secure fit. The arms on this mirror can adjust to fit different angles and lengths of... view full answer...
I spoke with my contact at Curt and the Curt T-Connector Vehicle Wiring Harness, # C56331, is exactly what you will need for your 2012 Chrysler Town and Country with LED lights.
This wiring harness will not draw the power directly from the vehicle wires, but intercepts those signals and sends them to the converter box which uses power from the vehicle battery to send the signals to the 4-pole trailer connector to power the lights on the trailer. view full answer...
We can get your 2014 Chrysler Town and Country set up for towing, starting with the trailer hitch receiver, and for that I recommend the etrailer Trailer Hitch Receiver # e98854.
This hitch is the best option for your '14 Town and Country because it has the best bumper clearance for your ball mount so you don't have to use the harder to find extra-long mounts, and because this hitch has a nice matte black finish which helps hide the scratches and dings compared to the glossy finish of... view full answer...
I recommend going with an adjustable ball mount, the MaxxTow # MT70068, which will give you up to 6-1/4" of rise on your 2015 Chrysler Town and Country. With this you'd need pin and clip # PC3 as well as 2" hitch ball # 40038. For a wiring harness to add a 4-flat you would want the # C56331. If you only wanted to hook up your 4-way to your trailer's 7-way you would then need adapter # 30717.
If you planned on using your trailer's electric brakes you would not need that adapter, instead... view full answer...
I may have a potential solution for you, but we do not carry any custom fit hitches for your 1994 Chrysler Town and Country. It looks like Curt used to make one, but they have not been available for about 2 years now.
I can offer you a universal hitch like the Curt # C13701. This hitch is rated for 5,000 lbs towing and can be adjusted to fit frames 18"-51" wide. Please keep in mind that this is not a custom fit hitch and this would have to be fabricated to fit the back of your car.
May... view full answer...
I have another recommendation as our etrailer Trailer Hitch Receiver # e98854 is only rated for up to 400lbs of tongue weight when equipped with a carrier like the Black Widow that you are considering. Currently there are no other receivers available with a higher capacity for a carrier.
I recommend using a Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7. This trailer has a bed that is 88" long and 52" wide which will be able to haul your two bikes that weigh 400lbs. Since the... view full answer...
The Curt Trailer Hitch Receiver # 13364 will accommodate your spare tire on your 2016 Chrysler Town and Country no problem. This is actually designed to fit around Stow-N-Go seats so you should have plenty of room!
Attached is an installation video on a similar 2016 Town and Country that you can check out. If you let me know what you plan on using the trailer hitch for I can make additional recommendations as necessary. view full answer...
To get replacement removable arms for your Roadmaster Crossbar-Style Base Plate Kit # 284-1 you'll just need to fill out the form I've linked below for # RM-ARMS listed as "Installation Details" and send it into Roadmaster to get the correct replacements. view full answer...
The Thule Passage 2 Bike Rack, # TH910XT, will fit your 2013 Chrysler Town and Country and you do not need locks to be able to use the rack. Some bike racks come with locks and some bike racks do not. A lock will not prevent the use of the rack. If you would like to be able to lock your bikes to the bike rack, then you could pick up the Thule Cable Lock, # TH538XT.
I have attached a demonstration video of this bike rack on a 2013 Chrysler Town and Country without a lock for you to check out. view full answer...
The Malone Profile18S cargo box # MPG910 will fit the factory roof rack on your 2014 Chrysler Town and Country if the center to center distance front the front bar to the rear bar is 24 to 36 inches. If you have a bar spread that is outside of those dimensions let me know what the spread is on your van and I can make other recommendations. view full answer...
You can use trailer wiring harness # 22121 to add a 7-Way to your 2011 Chrysler Town and Country that did not come with a factory 7-Way or tow package. If you also need a brake controller I recommend the P2 # 90885 because it is easy to set up and use and it is reliable.
All vehicles with automatic transmissions have some type of cooler. It is usually built into the radiator. However factory coolers are adequate at best for cooling transmission fluid so if you are towing then it would... view full answer...
There are no restrictions for Stow-N-Go seats for a trailer hitch for your 2010 Chrysler Town and Country so the trailer hitch I recommend for your van is the Curt Trailer Hitch Receiver # 13364 or etrailer Trailer Hitch Receiver # e98854
These are easy to install hitches and the only difference is cosmetic - the matte black finish of the etrailer hitch vs. the glossy finish of the Curt hitch. Otherwise they are the same in regards to installation and capacity so I recommend going with... view full answer...
The SportRack Lock # SR0901 is a fit for the SportRack Ridge Swing 4 Bike Rack - 2" Hitches - Swinging # SR2415. It is a great choice to secure your rack and then I recommend using a cable lock like # e98891 to run through the bike frames and the chain loop of your trailer hitch. view full answer...
I looked at some pictures of the 2008 and up Chrysler Town and Country and it looks like the K Source Universal Clip-On Extra Large Towing Mirror, # KS3891, should fit your van. If your mirror has a lip or space between the mirror housing and the glass then you will be able to use this mirror. I have included a link to a video review of this mirror for you.
Another option is the CIPA Deluxe Door Mount Mirror, # 11650, which fits at the bottom of the door and between the window and door.... view full answer...
As long as the diameter of the crossbars on your 2011 Chrysler Town and Country are less than 4 inches and are 25-7/8", 27-7/8", or 29-7/8" apart on center this SportRack Vista XL Cargo Box # SR7018 would work for you. view full answer...
The Thule ski carriers like the Thule SnowPack Ski and Snowboard Carrier Item # TH7326B are designed to fit any crossbar style, including the factory crossbars with the included mounts. This means you won't need any new parts to mount these on the crossbars of a 2014 Chrysler Town and Country.
If you need to replace the bottom clamps on a Thule Snowsport you can use the Replacement Bottom Mounting Clamp for Thule Ride-On Adapter, Snowboard Rack and Flat Top Ski Carrier # 753-2854. view full answer...
I recommend going with the Draw-Tite # 75579 to carry the Hollywood Racks Sport Rider # HR1400Z with your 2015 Chrysler Town and Country. This may require the plastic mud flap on the driver's side to be trimmed but when we installed this on a 2015 Town and Country there wasn't any trimming that we had to do (see attached video).
The Sport Rider is an excellent choice and will do a great job at carrying 4 bikes. My only concern is that if you check out the review video, due to the length... view full answer...
There is a trailer hitch receiver fit for your 2005 Chrysler Town and Country with Stow-N-Go seats:
- etrailer Trailer Hitch Receiver # e39KR
I verified for you that this is the correct fit for the Stow-N-Go seating on your Town and Country, and does not require any drilling or other modification to install.
The only other thing you may need, if you plan on doing some towing, is a trailer wiring harness. The correct fit for your '05 Town and Country is the T-One Vehicle Wiring Harness... view full answer...
Yes, the Thule Passage 3 Bike Rack, # TH911XT, will fit on your 2008 Chrysler Town and Country. When mounting the bike rack on your vehicle you will need to place the top clips at the top edge of the rear door and the lower clips at the bottom edge of your rear door. The lower arm of the carrier should be positioned on the top of the bumper.
One note about this bike rack is the rear wiper cannot be used when the carrier is mounted.
If you plan on carrying any womens or childrens bikes,... view full answer...
The Rightline Sport 3 XL Rooftop Cargo Bag # RL100S30 will fit just about any vehicle roof regardless of whether or not it has hardware, side rails or crossbars.
If the Town and Country is equipped with a factory-installed roof rack then the crossbars are the self-storing type that fold into the side rails when not in use. I reviewed the owners manual for this vehicle and it does not specify the dimensions or spread of the crossbars (but I was able to verify that the roof weight capacity... view full answer...
Go To Results