The Taylor Made External Eye Ends for 3/4" Bimini Top Poles # 36911705 have a flange that is 1/4" thick. This is the same with all our Taylor Made Bimini Top Parts.
You may consider changing all of your parts for the larger 1/4" flanges versus the 3/16" flange you currently have as it seems like there might be some strength issues with the smaller flange.
We have the matching Jaw Slides # 36911709 and other parts such as the Bimini Top Deck Hinge # 36911733. view full answer...
The Taylor Made Bimini Top Deck Hinges for Boat Sidewalls # 36911721 has 1/4" mounting holes. The mounting holes are 1-9/16" across on the center of each mounting hole. The overall length of the mount is 2-1/2" and the width is 7/8". view full answer...
The Taylor Made Bimini Top External Eye # 36911729 has a tab that measures 1-1/4-inch long x 1-inch wide x 1/4-inch thick and the hole diameter is 1/4-inch. I confirmed these dimensions with my contact at Taylor Made. view full answer...
The distance from the top of the mounting flange to the top of the receiver tube on the B&W Heavy-Duty Trailer Hitch Receiver part # BWHDRH25198 is around 7-3/8". The distance from the top of the mounting flange to the top of the receiver tube on the Curt 3-Piece Trailer Hitch Receiver part # C15511 is around 8".
I have attached a photo of each measurement for you as well. view full answer...
Reese part # RP54970 is the shank that is included in the weight distribution kit. If you flip the shank over, you will get as much as a 6 inch rise. That is 6 inches from the top of the receiver opening to the top of the WD head where the ball mounts. Hitch ball part # A-90 is a 2 inch diameter ball with about a 1 inch tall base, for a total of 3 inches from the base shoulder that rests on the WD head to the top of the ball. In total, from the top of the A-90 ball to the top of the receiver... view full answer...
The top part of the Thule SUP and Surfboard Pads for AeroCrossbars # TH845000 that sits on the topside of the crossbars is 20" long.
We also have the Thule SUP and Surfboard Pads for AeroCrossbars # TH846000 which are 30" long. view full answer...
The 20 inch height of the Fulton Boat Guide, # FBGR200101, is measured from the top of the horizontal part of the tube to the top of the vertical part of the tube where the padded part is. I made a picture for you that shows this measurement. view full answer...
The rise/drop for a set of RV steps like the Flexco Manual Pull-Out Steps for RVs part # SMFP-3200L is measured from the top of one step to the top of the other. These steps in particular have a 9" rise/drop. There is an 8" version of this step available as part # SMFP-3100. view full answer...
I walked out to our warehouse and assembled the Draw-Tite Hitch Cargo Carrier, part # 6502. From the top of the shank to the top edge of the carrier I measured 6-5/8 inches when the carrier is not folded up. Yes, you will be able to open the rear door on your 2004 Isuzu Rodeo when the Draw-Tite Cargo Carrier is attached.
Part # 6502 comes with a hitch pin to secure to your hitch, for added security we have the Trailer Hitch Receiver Lock, part # e98880.
I have linked a picture I took... view full answer...
I checked with Westin and for the Westin HDX Headache Rack part # 57-8023 the overall height is 25.9 inches from the top of the truck bed to the very top of the rack. view full answer...
The distance from the top of the trailer frame to the top of the horizontal bar on the Swagman Straddler part # S80503 is adjustable from 29-1/2" - 35-1/2". I have attached a photo to assist as well. view full answer...
The max rise of the Pro Series Adjustable Ball Mount part # 63071 is 4-5/8 inches. That measurement is taken from the top of the hitch opening to the top of the ball mount platform. view full answer...
From the top of the shank of the 48x32 Lets Go Aero GearCage FP4 Slide-Out Cargo Carrier for 2" Hitches part # H01380 to the top of the rail is going to be right at 8.75" view full answer...
The top of the shank L-brackets of the Front Mount Trailer Hitch License Plate Relocation Bracket, item # 5443, is about 3-1/4 inches to the top the license plate bracket. The hitch pin is not included with this item. You could use the Trailer Hitch Receiver Lock - Flush Design for 2 inch Trailer Hitches, part # e98880, or the Pin and Clip For Class III, IV and V Trailer Hitch Receiver, part # PC3. view full answer...
I checked with Jensen and they told me the dimension you are looking for is 3-3/4 inches from the top VESA mounting bracket to the top of the TV on the part # JE2417. I put this dimension on the picture you sent in. view full answer...
The distance from the top of the crossbar to the top of the carrier while using the mounts that are included with the Yakima FatCat EVO like part # Y03095 is 4-5/8". This same distance while using the Aero Crossbar SmarT-Slot Kit 2 part # Y03098 is 3-1/2" therefore it will become about 1-1/8" shorter. view full answer...
From the center of the mounting stud to the top of the back of the light base is 1-13/16 inches on the LED Submersible Trailer Stop, Turn and Tail Light # STL8RB. view full answer...
The 2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems part # EQ91-00-6140 measures 3" from the platform to the top of the hitch ball and 5-3/8" from the bottom of the shaft to the top of the hitch ball. view full answer...