We have hitch extenders like the # HE06 which will extend the hitch out an additional 6 inches and can be used with bike racks like the Swagman E-Spec part # S94FR that you referenced but you should note that when you use an extender like this you cut the capacity of the hitch by 50 percent. view full answer...
The Rapid Hitch Adjustable Locking Ball Mount # AM3400 has a total weight (with the hitch ball attachment) of just about 19 pounds. The shank by itself without the hitch balls is only 6 pounds.
I have attached a short video review on this product that you can check out as well. view full answer...
I have attached for you below the complete dimensions of the Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0 part # LC349975 to the degree that Lippert was willing to share. If you require further dimensions, I'd need to know exactly what that is to see if we are able to obtain these for you. That said, manufacturers typically don't release full CAD for products to prevent design theft so we are also limited in what we can provide. view full answer...
If your 2021 Grand Design Solitude 375RES is loaded when you're taking that measurement then yes, that would be why you're seeing a difference in the length from what you're measuring and what we have listed for the 7-Leaf Double-Eye Spring for 8,000-lb Trailer Axles - 24-7/8" Long # DX74XR.
As weight is placed on the springs they naturally flex which is why you're seeing what you're seeing.
Attached is a review video for you to check out! view full answer...
The weight of 1 of the Stromberg Carlson Base Pad Extreme for RVs and Trailers # SC33VR is approximately 4.5 lbs.
If you were wanting to know the weight capacity, it is 6,000 lbs. individually or 3,500 lbs. when 2 are stacked together. view full answer...
I would be happy to help you. There are a few ladder racks that use the stake pockets but for your application there's nothing with that style mounting method.
I recommend the Yakima BedRock HD Truck Bed Rack item # Y01160-59. These crossbars attach similar to a bed liner or camper shell. They use clamps to secure them to your Silverado's bedsides. The included locks will help to prevent theft.
The Kuat Piston item # KU32VR is a great option and would have more than enough capacity... view full answer...
To chose the correct Road Armor kit you'll need to measure the distance between the centers of the lower bolt holes that attach to the shackles as well as the drop from the center of the top bolt hole to the centerline of the two lower bolt holes.
For example, the Road Armor Shock Absorbing Equalizer Kit # LC696740 measures 6" across on center and 3-1/2" down from the top bolt position. This kit is also designed to work with 3,500 lbs - 8,000 lbs axles. As long as these specs match what... view full answer...
Sounds like you might have auto running lights on your truck which is then activating the running lights on your trailer and then turning on the camera of the # FOS43TASF that you have. Have you tried turning on the running lights or headlights of the truck when it's in reverse to see if that keeps the camera activated. view full answer...
I consider the Hollywood Racks RV Rider Bike Rack item # HLY64FR a pretty easy rack to install and remove from a hitch receiver but I can't speak to your experience to say for sure. One of the main issues you will have is the weight of the rack itself as it weighs 77 lbs. You said we, so I assume you'll have someone to help you get the rack on and off the receiver which is what I recommend for people with concerns like yours. The second person can help line up the shank with the receiver... view full answer...
Yes, we do. To add a 2" hitch to your 2023 Grand Design, I recommend the Adjustable Width Trailer Hitch Receiver for RVs item # 13703. It works with frames from 22" wide to 72" wide and comes with the hardware necessary to install. This hitch can be bolted to the frame or welded.
There are not any custom fit hitches available for your trailer which is why I recommended a universal one.
The Curt item # 13703 has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. This will... view full answer...
According to Swagman, 22-1/2" is the smallest bike size this adapter bar will fit. The bar itself, which would be the inside dimension of the arms, reduces down to 19" when fully collapsed,
I have attached a review of the adapter bar for your reference. view full answer...
The Curt # C13701 hitch has a 500-lb tongue weight rating, so it will be able to handle the weight of your dirt bike without issue as long as the carrier is rated for use on the back of a trailer or RV. Any type of carrier - bike, cargo or motorcycle - that will be used on the back of a motorhome or trailer MUST be made specifically for that application; you cannot use something that was designed to be used on a hitch on a passenger vehicle. These accessories, when used on a trailer or... view full answer...
The Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" # C13701 has a shipping weight of 47lbs so you'll need to subtract 2-3lbs for shipping materials for an approximate weight of 45lbs. view full answer...
Since your 2022 Grand Design Imagine 2910BH has two 4,400 lbs 3" diameter axles, I recommend the Roadmaster Comfort Ride Shock Absorbers item # RM-2460. This system has nitrogen-charged shock absorbers that help to eliminate trailer bouncing, chucking, and porpoising which will result in improved front-to-back, side-to-side, and up-and-down movement of your trailer for less sway and better handling.
I have linked an installation video below so you can see how to get this system set up.... view full answer...
Great question and information.
Based on your information I recommend the Trailair Rota-Flex 5th Wheel Pin Box - Lippert 1621 or 1621HD - 18,000 lbs # LC328330. Since your trailer is at 16,800 GVWR you really do not need to go up to 21,000 unless you just want to. The 18k capacity of this pin box will be enough.
If you do want the larger capacity you can get it here. Curt Rota-Flex 5th Wheel Pin Box - Lippert 1621 - 21,000 lbs
Item # LC328329.
From the center of the king pin to the center... view full answer...
When measuring the tongue weight with the etrailer Tongue Weight Scale # e99044 you want to measure the tongue weight before you connect the weight distribution hitch. This will allow you to ensure you are not overloading your weight distribution hitch and risking damage to your vehicle or hitch. When connecting to your 2022 Grand Design Imagine 3100RD it is best to use the Equal-i-zer OnTarget Laser Measuring Tool # EQ37FR. This will ensure the weight is properly distributed across your... view full answer...
The Trailer Hub and Drum Assembly # 8-407-5UC3-EZ is a lug centered hub with a pilot hole size of 3.62". Your 99.25mm(3.75") hub bore wheels will fit on hub/drum. view full answer...
The Swagman Around the Spare Deluxe 2 Bike Rack # S80501 referenced in your question weighs just about 22 pounds. It can safely secure up to 2 bikes that weigh 35 pounds each.
The rack is designed to mount to a 4 to 4-1/2 inch square continuously welded steel bumper. If this is what you have on your Grand Design the rack will work perfectly. I have attached a short video demonstration that you can check out as well. view full answer...