We do have a trailer hitch receiver that fits your 2021 Mitsubishi Mirage G4 ES. What you need is the Curt Trailer Hitch Receiver # C11449. This is a custom-fit Class I hitch with a 1-1/4" receiver. It features a bolt-on installation and comes with a limited lifetime warranty.
According to the installation instructions, all non-trailer loads applied to this product must be supported by stabilizing straps. That means if you will be using the hitch for something other than towing you will... view full answer...
The mount kit for the # 71000 bumper is indeed sold separately as part # 95500. You can order it online from our website by using the product link provided below or by calling our Customer Service folks at 800-298-8924.
You can determine the various shipping rates by adding the item to a shopping cart, and clicking the CALCULATE SHIPPING link. You would input your zip code, and the various shipping methods and rates would appear. If you order by phone, the Customer Service person you speak... view full answer...
Aries offers a couple of options that will work with your 2009 Honda Ridgeline. for a bull bar which covers the center section of the grille, I'd recommend the # AAB35-6001 or for a full-coverage grille guard, go with the Aries # AA6055. view full answer...
We do have some trailer hitch and wiring options for your 2014 Mitsubishi Outlander. The most popular hitch option is Curt hitch # C13163.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise... view full answer...
It is still possible to put a roof rack together for your 2012 Mitsubishi Eclipse. The reason you didn't see anything is because manufacturers have discontinued the fit kits that would allow you to install the rack. What you can use is the Rhino-Rack Vortex Aero roof rack system. You will need the following:
-Rhino-Rack Vortex Aero Crossbars # RRVA126B-2
-Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA
You will also need the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series... view full answer...
I found a solution for your needing a replacement lock and key for your Yakima RocketBox cargo carrier.
If you there is no number on the lock core face, you will be able to use the SKS style lock and keys like # Y07202. This lock set will include 2 lock cores, 2 keys, and 1 control key that will remove the old lock cylinder and install the new one.
Yakima has been using the SKS locks and keys since 1993. They told me that there were only two years of RocketBox carriers that did not use... view full answer...
We do have trailer hitches and wiring available for the 2002 Mitsubishi Montero Sport. I have included a links to the Montero Sport hitches below. There are some videos for the Sport model and the hitches will install the same on the 2002 as the 2003. All of the hitches come with instruction links on the right hand side of the product pages so you will be able to see ahead of time exactly what a hitch installation entails.
As far as wiring, the Sport model uses the Tow Ready Wiring, #... view full answer...
There are no custom-fit front-mounted hitches made for your 1999 Mitsubishi Montero Sport but as you noted we do offer some universal-fit hitches intended for RVs that might work for you.
These hitches are made with adjustable mounting brackets that allow them to fit on vehicle frames of varying widths. They also vary in their weight ratings.
You'll want to have a look at the front-end frame access on the Montero to see if you have enough space to mount one of these. The Ultra-Fab # UF35-946403... view full answer...
You will need the Curt Weld-On 2" Receiver # E17 to have a custom receiver built for your 2004 Mitsubishi Galant ES 2.4L. There is currently not an aftermarket receiver being produced for your Galant.
The Vehicle Wiring Harness Kit # C59496 will allow you to wire in a 4-way flat connector. This will be needed for most small trailers you may tow and can also be used with Auxiliary Lights # C53201. The auxiliary lights are needed if your hitch mounted accessory impairs the view of your... view full answer...
I spoke with my contact at Timbren and the Rear Suspension Enhancement System for your 2004 Mitsubishi Montero is part # TGMFK25S. This system eliminates suspension sag, cushions road shock, reduces sway, and improves roll stability. view full answer...
I do have the y-style bow stop in the size you need but it is not offered in the thermal-plasticized rubber (non-marking). Instead you will want to use the Yates Y-Style Bow Stop part # YR7Y44-4 which has a 7" span and 4" base (see photo). The bow stop is made of a similar heavy-dry rubber that does have the tendency to leave marks. Unfortunately, this is the only option we have for you.
I have attached a review video on the bow stop for you as well. view full answer...
We can offer you several choices in a 2-inch Class III hitch including the Curt # 13581 that you referenced. Click on the link provided to see all available hitches for your 2008 Mitsubishi Outlander. All hitches for your Outlander install without drilling and include the required mounting hardware. I linked an installation video for the Curt hitch but all will install in essentially the same way. view full answer...
Yes! We do have a hitch available for your 2022 Mitsubishi Outlander. For a great hitch option, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C87WR. The Curt hitch provides 525 maximum tongue weight capacity and 3,500 pounds of maximum gross towing capacity. In order to make sure that your vehicle can accommodate this much weight, I recommend confirming with your owner's manual. Also, if you have a hands-free hatch sensor, this hitch will work with the sensor... view full answer...
Yes, the mounting hardware by itself is absolutely available for the Curt Trailer Hitch Receiver # 13581, the Replacement Hardware Kit for Trailer Hitches # RHK.
All you need to do is click # RHK, enter "13581" in the "Hitch Item Number" box, select "Curt" from the drop-down menu, and hit “Add to Cart” to place your order.
I have added a link to a video review for you to check out as well of the Replacement Hardware Kit # RHK. view full answer...
For a catalytic converter that is in line with the Federal Emissions you can use either a universal fit, like part # MF99004HM, or a more custom fit like parts # MF49459, # MF93195, # MF50824, and # MF49314.
You will want to choose one that performs like your OEM converter so as not to set off any error codes.
The universal fit # MF99004HM and part # MF50824 do not have an O2 port if that is something that you are looking at. Part # MF50824 doesn't have air tubes either.
Keep in mind... view full answer...
Your current carrier offers about 1,440 square inches of cargo space. There are a few carriers with a bit more room, but nothing that's dramatically larger.
Cargo carriers can't get too much bigger than that because as they get wider than 60 inches, they can transmit too much torque on the connection between the basket and the shank that slides into the receiver. As the carrier gets longer, the weight of the gear carried on the rack gets too far away from the hitch receiver. As the weight... view full answer...
If you were wanting the weight distribution system to prevent the rear of the vehicle form squatting when a trailer is hitched up, you might consider an Air Helper Spring system like the # AL60747 from Air Lift. The air springs mount inside your current coil springs, and can be inflated when needed to prevent some of that rear send squat. If you click the provided link, you can see the installation instructions.
The leverage provided by the weight distribution system's spring bars places... view full answer...
For your 2007 Mitsubishi Endeavor you would need the Curt hitch part # 13113 which is confirmed fit.
I have attached an install video for the # 13113 hitch which will walk you through the install process.
If you wanted to do some towing, you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and... view full answer...
We offer roof racks for the 2014 Mitsubishi Outlander for each of the three roof configurations it can come with, flush rails, totally bare roof and raised side rails that run front-to-back. You can use the linked page to see options for your roof by clicking on the configuration you have.
For a roof with flush front-to-back rails I like the Rhino-Rack Vortex system made of parts # RRVA126B-2 and # RRSX031. view full answer...
We can help you with a roof rack system for your 2018 Mitsubishi Outlander that has a plain roof.
The best value roof rack in my opinion is the Rhino-Rack Vortex Aero black roof rack that is made of parts # RRVA137B-2, # RRRLKVA and # DK290. Like costlier brands' similar products this will be a quiet rack that will make less wind noise. And the Vortex bars allow you to mount accessory carriers in two ways - with around-the-bar clamps and T-Slot fittings that slide into the track in the... view full answer...
Go To Results