We do indeed offer Class III receiver hitches for the 2001 Mitsubishi Montero and Montero Sport (two distinctly different vehicles).
For the 2001 Montero, use the Curt Class # C13800 III hitch. If you'll be towing with the hitch you'll also need a trailer wiring harness like # C55380 a ball mount like # C45010 and # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball.
For the 2001 Montero Sport, you'd use the Curt Class III, part # 13223. For trailer wiring, use # 119178KIT and the... view full answer...
I spoke with my contact at Timbren and the Rear Suspension Enhancement System for your 2004 Mitsubishi Montero is part # TGMFK25S. This system eliminates suspension sag, cushions road shock, reduces sway, and improves roll stability. view full answer...
Aries offers a couple of options that will work with your 2009 Honda Ridgeline. for a bull bar which covers the center section of the grille, I'd recommend the # AAB35-6001 or for a full-coverage grille guard, go with the Aries # AA6055. view full answer...
Your current carrier offers about 1,440 square inches of cargo space. There are a few carriers with a bit more room, but nothing that's dramatically larger.
Cargo carriers can't get too much bigger than that because as they get wider than 60 inches, they can transmit too much torque on the connection between the basket and the shank that slides into the receiver. As the carrier gets longer, the weight of the gear carried on the rack gets too far away from the hitch receiver. As the weight... view full answer...
If you were wanting the weight distribution system to prevent the rear of the vehicle form squatting when a trailer is hitched up, you might consider an Air Helper Spring system like the # AL60747 from Air Lift. The air springs mount inside your current coil springs, and can be inflated when needed to prevent some of that rear send squat. If you click the provided link, you can see the installation instructions.
The leverage provided by the weight distribution system's spring bars places... view full answer...
I do have the y-style bow stop in the size you need but it is not offered in the thermal-plasticized rubber (non-marking). Instead you will want to use the Yates Y-Style Bow Stop part # YR7Y44-4 which has a 7" span and 4" base (see photo). The bow stop is made of a similar heavy-dry rubber that does have the tendency to leave marks. Unfortunately, this is the only option we have for you.
I have attached a review video on the bow stop for you as well. view full answer...
Go To Results