We do offer various trailer wiring adapters to allow connecting a vehicle and trailer that use different connector types and all such adapters can be see on the linked page. For an adapter to join a round-pin 7-way on the vehicle to a 7-way blade (RV style) on the trailer you can use the Hopkins # HM47425.
Note that it is possible that the trailer may have a different wiring configuration than the vehicle and adapter. For the long term, if this same trailer is the primary one to be towed... view full answer...
Hitch bike racks mount onto a trailer hitch receiver. There are currently not any trailer hitch receivers available for your 2021 Mercedes Benz GLA so you will want to go with a trunk-mounted bike rack instead. This is usually a cheaper and easier route anyways.
I recommend looking into Yakima FullBack 2 Bike Rack - Trunk Mount - Adjustable Arms # Y02634. This attaches to the trunk of your vehicle and allows you to safely hang 2 bikes on the bike rack. The points of the rack that make... view full answer...
For your 2017 Coachman Prism on a Mercedes Sprinter that has a factory 7-way the Prodigy P3 part # 90195 can pretty easily install. There is a green connector under the driver seat of your RV that is for the install of a brake controller.
We don't sell a connector that plugs right into it, but you can still use it to wire up a brake controller like the P3 part # 90195. You'll need to cut the connector off and then wire the vehicle wiring to the controller's wiring.
On the controller the... view full answer...
We do offer a replacement 7-way harness for the 2009 Mercedes-Benz GL450 with tow package. You can use Hopkins part # HM42190 which will simply plug in to the OEM connector where the damaged 7-way is now connected. view full answer...
We do offer a hardwired solution for installing a 4 pole trailer wiring harness on your 2012 Mercedes-Benz M-Class.
I'd recommend the powered taillight converter, part # C59496. view full answer...
With a hitch like the Curt part # C13290 installed on your 2017 Mercedes GLC300 if you need a 6 inch rise you can take a ball mount and flip it upside down.
For example, we have the Curt ball mount part # C45090 which when upside down gives 6 inches of rise. view full answer...
The 7-Way to 5-Way/4-Way Trailer Adapter # C35FR will prevent the error light when towing a trailer with LED tail lights behind your 2023 Mercedes-Benz GLS. It will also allow for a trailer with incandescent lights to also work so you will not need a 2nd adapter. view full answer...
There is not an aftermarket plug and play brake controller wiring connector available for the 2003 Mercedes ML 350. You may be able to purchase one from the vehicle dealer though.
I spoke with my contact at Tekonsha and his advice is that you should take your Mercedes M Class vehicle to the dealer to have a brake controller installed. The Mercedes vehicles have very sensitive wiring and splicing into the brake circuit or power on the vehicle can cause issues.
If you have wiring experience... view full answer...
If your 2016 Mercedes-Benz is a GLE 350 (and does NOT have the Active Curve System) then Curt does offer a hitch fit in a 2-inch Class III type, part # C13294. Draw-Tite also offers a 2-inch hitch for this vehicle, part # 76141. Both hitches are no-drill installs with included hardware, but both are fairly involved. I have linked the instructions for both hitches for your review. These also indicate the tools required.
If your 2016 is not a GLE 350 please let me know the specific version... view full answer...
You do likely have a 2 inch trailer hitch on your 2011 Mercedes GL350. To be sure, just measure the receiver opening width. Just measure the opening, not the overall width.
The Apex XT 5 bike rack # TH9026XT is a great option. Carrying 5 bikes can be difficult, even on a rack designed for 5 bikes. The Thule Apex XT has 7 inches of spacing between the cradles for each bike giving you plenty of space to load them. It also holds the bikes at 3 locations keeping them from swaying back and... view full answer...
Currently there is no hitch offered for the 2010 Mercedes-Benz E-Class Coupe, only for the sedan version. Hitches are designed expressly for specific vehicles and so it is not advisable to attempt to install one on a vehicle different than that for which it was intended.
The Curt hitch you referenced, part # C11001, is a light-duty Class I hitch suitable for use with a hitch- mount bike rack or cargo carrier. Please note that your vehicle does not carry a rated towing capacity according... view full answer...
Installation of a Prodigy P3 trailer brake controller # 90195 in your 2014 Mercedes-Benz GL-Class requires a hardwire kit # ETBC7 since we have no custom-fit plug-and-play wiring harnesses for it. If your dealer can install a functional brake controller connection port under the dash, and supply the M-B connector that fits it, this part could be spliced to the pigtail harness included with the P3.
This pigtail plug is available on its own as part # 20127. view full answer...
We have the Center Aisle Mat for your 2013 Sprinter Winnebago View. We have 3 color options for you:
# WT442492 in Black
# WT452492 in Tan
# WT462492 in Gray view full answer...
The only trailer hitch we offer for your 2010 Mercedes-Benz GL450 is the Curt 2-inch Class III hitch # C13102. This hitch presents a fairly involved installation procedure, requiring removal and reattachment of exhaust brackets, exhaust tips, heat shields, and fascia bracket; heat shields may also require trimming. I have linked an installation video along with the written instructions.
This hitch is rated for a maximum trailer weight of 3500-lbs. Also, please note that it is NOT rated... view full answer...
We do not have license plate lamps specific to your 2010 Winnebago Profile View on Mercedes-Benz Sprinter Chassis.
We do have some light bulbs like the 1157 LED Bulbs # ARC93FR which fit your View and work for lights such as back-up, interior, or courtesy lights. But, not any that mention the license plate lamps.
We also have lights for license plates, like the Mini LED Trailer License Plate Light # OPT77FR or Optronics LED Trailer License Plate Light w/ Bracket # LPL55CB. But, they are... view full answer...
We do offer several rear-axle kits and a front axle suspension kit for your 2012 Mercedes-Benz Sprinter 3500 Cab and Chassis Flatbed but none of these is an air spring. All available suspension enhancement products for your vehicle are jounce or leaf spring types.
The Timbren front-axle jounce spring kit we offer for your 3500 is # TMBFSP35, which is a no-drill bolt-on kit.
For the rear axle you have several options including overload pads # TLA7311 from TorkLift that can be easily removed... view full answer...
While Thule does offer their Tram Ski and Snowboard Carrier Adapter # TH9033 for a Hanging Bike Rack # TH9024XT, they do not have an attachment for a T2 # TH9036XT. If you do not have a roof rack for the Carrier # TH732508 you might consider the SeaSucker # SEA46ZR which will use its vacuum cups to secure to your roof. view full answer...
We do carry a few racks, such as the Hollywood Racks Sport Rider SE # HLY84FR which are rated for use with heavier bikes weighing up to 80 lbs apiece. This will work great for an E-bike. Unfortunately we do not offer any hitch mounted trike carriers at this time. view full answer...
Currently I do not see any aftermarket manufacturer producing a custom fit receiver for your 2019 Mercedes-Benz C300 4Matic Wagon. They only have options for the sedan or coupe. We do have a 2" Receiver # E17 that you can take to a fabrication shop and have a custom hitch fabricated to fit your Mercedes.
The ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT will allow you to add a 4-way flat connector. This harness uses sensors to detect power for the tail lights rather than splicing... view full answer...