Expert Answers about Mercedes-Benz M-Class
- Can Atwood Water Heater in 2015 Starcraft Comet H1232 A-frame Be Converted to Switch Control
- My technical contact at Atwood/Dometic said that most often smaller pop-ups like your 2015 Starcraft Comet H1232 A-frame come standard with a manual-pilot-only water heater. For these there is no retro-fit to electrical operation via an inside switch; you would need to replace the entire heater.
The number 93756 actually refers to the specific document for your heater, but it is not actually the heater part number.
The linked page displays the gas and gas/electric combo water heaters...
view full answer... - Trailer Hitch Recommendation for a 2011 Mercedes ML350 BlueTECH Model
- We do have one trailer hitch that is listed as a fit for a 2011 Mercedes ML350 BlueTECH model. Take a look at Curt trailer hitch # C13102. This model was designed to fit the BlueTECH edition. I have included a link to the installation instructions for you to view.
If you plan on doing some towing, I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For trailer wiring use # C59236. I have included a link to the...
view full answer... - Availability of Trailer Wiring Harness for 2012 Mercedes-Benz M-Class
- We do offer a hardwired solution for installing a 4 pole trailer wiring harness on your 2012 Mercedes-Benz M-Class.
I'd recommend the powered taillight converter, part # C59496.
view full answer... - Is a Brake Controller Plug and Play Wiring Harness Available for a 2003 Mercedes ML 350
- There is not an aftermarket plug and play brake controller wiring connector available for the 2003 Mercedes ML 350. You may be able to purchase one from the vehicle dealer though.
I spoke with my contact at Tekonsha and his advice is that you should take your Mercedes M Class vehicle to the dealer to have a brake controller installed. The Mercedes vehicles have very sensitive wiring and splicing into the brake circuit or power on the vehicle can cause issues.
If you have wiring experience...
view full answer... - Availability of Trailer Wiring Harness for 2012 Mercedes-Benz ML350 BlueTec
- None of our wiring suppliers offers a trailer wiring harness that is compatible with the electrical system in your 2012 ML350. You will likely have better luck checking with your Mercedes-Benz dealership for a wiring harness that will fit your ML350.
If you need ball mounts and hitch balls you might consider the etrailer Ball Mount Kit # 989900 which includes several ball mounts and two hitch balls, pin and clip, all together in a handy carry bag.
view full answer... - Trailer Hitch, Wiring and Related Towing Items for 2011 Mercedes-Benz Gas Engine ML350 4Matic
- We can help you with a trailer hitch for your 2011 Mercedes-Benz ML350 to enable you to tow your utility trailer.
If your M-Class is the gas model (not the BlueTEC diesel) and if it does not have the Air Ride Suspension you can use the Curt 2-inch hitch # 13342 which bolts on using included hardware. The written instructions for this hitch are linked for you.
If your trailer has lights you'll also need a 4-pole wiring harness to power them. For an option that requires no cutting and splicing...
view full answer... - USA Made Adjustable Ball Mount Recommendation for Zero Rise/Drop
- To get to a zero drop/rise you have to go with an adjustable ball mount. For a US made one the best option we have is the B and W Tow and Stow part # BWTS10037B which would be a great option as this is one of our best selling ball mounts.
view full answer... - Is there a Brake Controller Wiring Harness that Plugs into a 2007 Mercedes ML500
- A brake controller wiring harness is not available for the 2007 Mercedes ML500. It is possible that Mercedes has a harness if the vehicle does indeed have a port to plug one in. That would be obtainable at a Mercedes dealer.
Usually, with factory harnesses, there are more than just 4 wires, which is what brake controllers have. The brake controller wire functions are white for ground, black for 12 volt power in, red for input from the brake switch, and blue for output to the trailer brakes....
view full answer...
Go To Results