Hey Brian, so we do have a couple of choices for your Outback but personally I like the Hidden Hitch by Draw-Tite Trailer Hitch Receiver # DT74YR the most.
The reason being is, it get's installed behind the rear bumper so it's completely hidden giving you that "from the factory" look when not in use.
Finally for wiring, I recommend going with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467 which is a custom fit harness that simply just plugs into your OEM... view full answer...
Yes, the Redarc Tow-Pro Liberty Brake Controller # RED52VR will fit your 2016 Chevy Colorado Z71. Sometimes our fitguide lists things this way when there isn't a custom wiring harness available. Rest assured, this will fit your truck and any other vehicle with a 7-way. This is my favorite brake controller since it is simple, reliable, and takes up almost no space in the cab. Great choice! view full answer...
I would need to know what specific year make and model vehicle you have to recommend a custom fit class IV or V hitch. The best solution I have for you without that information is to recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch item # 41990-07. This is a class V universal hitch with a 2" receiver. It fits frames up to 44" wide and has brackets that bolt directly to the sides. There is welding required on this heavy duty of a hitch but it is only to attach the crossmember... view full answer...
The etrailer Electric Trailer Brakes # AKEBRK-35-SA will work assuming you have brake flanges on the axle. If you don't have a brake flange you will need to take two of the # 4-35 to an axle shop and have them welded on. You will also need a hub and drum assembly like # AKHD-545-35-EZ-K.
I'm assuming the trailer has a 4-way on it right now so you will have up upgrade to a 7-way using the # HM20048. Adding brakes also means you need a breakaway kit like # 20400. On the vehicle side, you... view full answer...
I would be happy to! To add a hitch to a 2024 Chevrolet Trailblazer, I recommend the Draw-Tite item # DT55GR. This hitch is custom fit and bolts to your Trailblazer with included hardware.
I recommended the Draw-Tite Hitch item # DT55GR because of the way it installs. The main crosstube mounts behind your rear bumper cover leaving only the 2" receiver exposed. This not only looks better but helps with ground clearance.
If you are planning on towing you will also need a wiring harness... view full answer...
Hello Ken. We do have roof rack options for your 2024 Honda CR-V Sport L. Does your CR-V have the OEM flush mounted rails that run front to back? I ask because we offer roof rack option for both naked roof vehicles as well as vehicles with the OEM flush mounted rails. So, I will go ahead and recommend options for both roof styles:
OEM Flush Mounted Rails
- Thule WingBar Evo Crossbars # TH711300
- Evo Flush Rail Feet for Thule Crossbars # TH710601
- Fit Kit for Thule Evo # TH52KE
Naked... view full answer...
I would be happy to Ken! The best hitch for a 2024 Toyota RAV4 Hybrid is our etrailer item # e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This hitch fits all models of the 2024 RAV4 including your Hybrid Premium XLT.
The reason the etrailer item # e23ZR is the best hitch for your hybrid is because the crosstube mounts behind your rear bumper leaving only the 2" receiver visible. This not only looks better because it is hidden but it also helps with ground... view full answer...
To add a hitch to your 2024 Kia Sorento, I recommend the etrailer item # e28AR. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity and a 600 lbs maximum tongue weight.
I really like the etrailer Hitch item # e28AR because of the way the crosstube is concealed once installed. It mounts behind the rear bumper cover, which leaves only the 2" receiver visible. This not only looks better but... view full answer...
Hey Mark, the best hitch for your 2008 Toyota Sienna LE is the etrailer item # e98837. This hitch is custom fit and bolts to your van with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. These capacities can be increased to 5,000 lbs and 500 lbs when used with a weight distribution system.
The reason the etrailer item # e98837 is the best hitch is because of the way it mounts. The receiver sits right... view full answer...
Hello Devin, we do have a few options for you. The first thing that comes to mind is to just do a direct mount awning. The Thule HideAway Awning # TH490018 is a great direct mount option. You just need to have 8.5" of open space on the side of the van.
If you prefer a roof mounted option, the best bet would be to install roof tracks like the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14. You can then use the Track Mount RLTF Legs # RLTF along with some Rhino-Rack Vortex Aero Crossbars... view full answer...
Whoever you spoke with was either mistaken or not being fully honest. I just checked with Tekonsha, and your 2023 Tesla Model Y is 100 percent compatible with the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector # 119250KIT.
The other part you mentioned is on (very) extended backorder and is not just plug and go, there is more to it like running wires to the battery. The ZCI will work, and while it is a more involved install, you won't have to cut into the... view full answer...
My favorite brand for flat towing equipment is Roadmaster so I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM77GR for your 2024 Escape Hybrid. For a complete setup you will also need a tow bar, safety cables, wiring, and a supplemental braking system. I recommend the following:
-Roadmaster Falcon All-Terrain Tow Bar - Non-Binding # RM-522
-Roadmaster 64" Single Hook, Straight Safety Cables # RM-645
-Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit... view full answer...
Hey Charles,
While we do have a roof rack system for your Wrangler I do want to note that there are no American made options as most of the manufacturers for roof racks are either based in Africa or Europe/Asia. If you're looking to capitalize on space and want to hold a lot of items then Rhino-Rack or Front Runner are going to be the best option with their platform racks.
-The Rhino-Rack Pioneer Platform Rack with Gutter Mount Backbone Mounting System - 57" x 59" # RR86XP
-Front... view full answer...
Hello David. I can definitely help point you in the right direction. Does your 2022 F250 have the OEM 5th wheel prep package in the bed? Post in the comments below and let me know because that will be a major deciding factor in selecting a hitch.
If you do have the OEM prep package, you will have a lot of options for a hitch that will fit in the 18" deep bed with a tri-fold tonneau on top. My recommendation is the B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package # BWRVK3300.... view full answer...
I'm sorry to hear about your trouble and I would be happy to help you get your boat where it needs to go. For a hitch that fits your 2017 Tucson and won't need to be returned I recommend the etrailer Trailer Hitch Receiver # e54AR you were looking at. This has a bolt-on installation and a matte black finish.
The hitch also has a concealed cross tube so only the receiver will be visible at the back of your vehicle, giving it a nice clean look. The 2" receiver makes it a better choice over... view full answer...
Hey Kent, so we do have hitches that fit your 2021 Hyundai Palisade which were rated for use with weight distribution systems like with our part # e95ZR. Your frame design will be totally fine.
For the weight of your trailer the Reese Dual Cam Weight Distribution system part # RP45FR would be a really awesome solution. It has the best sway control at preventing sway before it starts. view full answer...
Go To Results