Expert Answers about Nissan Xterra
- Availability of Towing Mirrors for 2013 Nissan Xterra
- Although we do have towing mirror options for your 2013 Nissan Xterra, a custom slip-on mirror like the
# CM10900 you'd looked at isn't available.
I'd recommend the K-Source Universal Towing Mirrors, part # KS3891-2. These mirrors attach to the factory mirrors using sturdy ratcheting straps that provide a tight fit for minimal vibration. The 7-3/4 x 5-1/8 mirrors provide a great field of vision when towing. The driver and passenger side mirror are included.
If you click the provided...
view full answer... - Towing Mirror Recommendation for 2014 Nissan Xterra
- The CIPA Universal Fit Towing Mirror, Clamp-On # CM11980 that you referenced will work well for a towing mirror on your 2014 Nissan Xterra. This towing mirror will allow you to extend the mirror out to provide you with the best view of the road and your trailer. I have attached a review video of the # CM11980 mirror for you.
Personally, I like the K-Source Universal Towing Mirror, Clip-On # KS3891. This mirror attaches to your Xterra's mirrors by clipping on the top and bottom of the...
view full answer... - Adding Roof Rack Crossbars on a 2013 Nissan Xterra to Mount Cargo Basket
- You can add crossbars to your 2013 Nissan Xterra. The aftermarket crossbars available do fit different years of the Xterra but I can't speak to the OEM bars.
To add crossbars I recommend using Inno square bars # INB107 with feet # INFR that clamp around the side rails. With the bars installed and at the proper width you can mount the Thule basket # TH859XT.
view full answer... - Adding a 7-Way and Brake Controller to a 2014 Nissan Xterra
- All 2014 Nissan Xterras will have at least some part of the tow package wiring but not all of them. Models that came with the factory tow package will have everything including a connector at the back. To determine if your Xterra has all of the pre-wiring you can have a Nissan dealer run the VIN and they should be able to tell you how the vehicle is equipped so you won't have to go digging around in the vehicle.
As far as a brake controller you can check under the dash to see if your Xterra...
view full answer... - Is 2006 Nissan Xterra Manual Transmission Flat Towable
- Yes, a 2006 Nissan Xterra with a manual transmission is flat-towable. The first thing you need is a base plate kit like the Roadmaster Direct Connect part # RM-344-3B that you referenced.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For...
view full answer... - Upgrade 4-Way to 7-Way Adapter for a 2015 Nissan Xterra and Recommended Brake Controller
- The harness and 7-way plug that you suggested # 118267 is a compatible upgrade for your 2015 Nissan Xterra that currently has a 4-way plug. You'll just need to plug-in with no additional wiring needed.
If you're interested in a brake controller with all the bells and whistles, I recommend the Tekonsha Prodigy P3 Brake Controller with Adapter # 90195, # 3050-P. It's the latest version of our popular and top rated Prodigy line of controllers.
view full answer... - Trailer Hitch Fit for a 2014 Nissan Xterra
- You are going to need to install a new hitch on your 2014 Nissan Xterra. The vehicles are different enough that the hitch fits from one do not apply to the other.
The most popular hitch option we offer is the Curt part # 13514 which is confirmed as a fit for your Xterra. I attached an install video for you to check out as well.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop...
view full answer... - Does the Weight of a Weight Distribution System Count When Calculating Tongue Weight
- When calculating tongue weight for a weight distribution system you would not add the weight of the system into the calculations.
To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle.
I have included a link to the right to our help article on determining tongue...
view full answer... - Troubleshooting Trailer Running Light Circuit that Stopped Working on a 2007 Nissan Xterra
- Actually the brown relay controls the 12-volt power circuit (which you aren't using), and the blue relays control the turn signal circuits so most likely the problem is a blow fuse in the fuse box of your 2007 Nissan Xterra or one of the other towing relays you had installed in your vehicle.
I would recommend you check the diagram for the fuse panels and relay boxes to see find the trailer running lights circuit and check to see if a fuse or relay is blown. The easiest way to check for...
view full answer... - 6 on 5-1/2 inch Bolt Pattern Hub Drum Recommendation for a Timbren Axleless Setup
- I believe I have a solution for you, but there are not hubs available that have a 6 on 4-1/2 inch bolt pattern. I believe you may have meant to type 6 on 5-1/2 inch. Which I can help if so.
For a Timbren System part # ASR3500S05 would work well and then for a 6 on 5-1/2 inch hub to install on the spindle you would want part # 84656UC3.
view full answer... - Are Pigtails Available from the Tow Ready Part # 118267 for a 2010 Nissan Xterra
- The Replacement Wiring Harness # 118267 is actually a piece of a few different wiring combinations for your 2010 Nissan Xterra (like part # 118266 for example). This is a whole wiring harness and unfortunately isn't offered in pigtails so you will need to get the whole kit.
On the bright side you will be getting a whole new wiring harness with a brand new 7-Way connector from one of our most reliable wiring manufacturers so you know it will last.
view full answer... - Will Yakima RocketBox Pro 14 Rooftop Cargo Box Fit Factory Roof Rack on 2010 Nissan Xterra
- I checked with Yakima and found out the Yakima RocketBox Pro 14 Rooftop Cargo Box # Y07192 is a fit for the factory roof rack on your 2010 Nissan Xterra.
This box gives you 14 cubic feet of storage, has a lid that conveniently opens on either side, comes with lock cores that help secure your investment and uses clamps to secure to your bars that you only need to tighten with hand knobs. I have added a link to a video review of this box for you to take a look at.
view full answer... - Installation of Trailer Wiring Harness on a 2010 Nissan Xterra
- Step 4 in the instructions for wiring harness # C56225, linked for reference, seems to be where you are running into a little trouble. Before plugging in the harness to the vehicle behind that kick panel, you will need to insert the relays on the the connector.
On the other end of the 12 pin connector there are 3 ports, one for each of the relays. The brown one goes with the brown relay and the white plugs go with the blue relays. After you have plugged in everything you can tuck in the...
view full answer... - Hitch Extender for Front Mount Hitch on 2008 Nissan Xterra
- Yes, you can use a hitch extender such as the 7" Extender # HE06 with the Curt Front Mount Hitch # 31514 on your 2008 Nissan Xterra.
Please be aware that using any extender will reduce the capacity of the front-mount hitch by half. So the 350 lb vertical load (which is the same thing as tongue weight on a rear mount hitch) that the hitch is rated for would be reduced to 175 lbs meaning the most your bikes and rack could weigh is a combined 175 lbs. There may also be some extra motion due...
view full answer... - Rear Suspension Helper Springs for a 2001 Nissan Xterra Towing a 2,500 Pound Trailer
- If your 2001 Nissan Xterra is a 4-wheel drive model with standard ride height then I recommend Timbren springs # TNRXT4. These springs will not affect the unloaded ride quality, work independently side to side, and require no maintenance.
For a 2-wheel drive model with standard height you can use the SuperSprings # SSA1. These springs work independently side to side and require no maintenance as well.
view full answer... - Troubleshooting 7-Way Adapter on 2015 Nissan Xterra Not Working When Used
- If you already installed a 4-way trailer wiring harness like the part # C56225 which comes with all of the needed relays and harnesses then to convert the 4-way to a 7-way so that you can install and use the brake controller you would need to use the part # 118267 as this will replace the 4-way and give you a 7-way that is functional.
This would work well with your Prodigy P2 part # 90885 and install harness part # 3050-P.
view full answer... - Can Ultra-Fab Motorcycle Carrier # UF48-979033 Carry 450-lb Bike on 2002 Nissan Xterra
- In order to be able to use the full 500-lb carrying capacity of the Ultra-Fab Motorcycle Carrier # UF48-979033 you will need to use it with a vehicle and hitch that both have a tongue weight (TW) capacity in excess of its 500-lb rating. If either the vehicle or the hitch have a TW rating below 550-lbs, then you'll start to lose carrying capacity.
For example, if your Xterra owner's manual said the TW rating was 600-lbs but your installed hitch has a TW rating of 500-lbs, then the lower...
view full answer... - Would Trailer Hitch From 2000 Nissan Xterra Fit a 2003 Xterra
- Yes, a hitch from a 2000 Nissan Xterra would also fit a 2003 Nissan Xterra. For example the Draw Tite Hitch part # 75107 that you referenced would fit either year.
Hitch hardware is considered one-time-use so you would need new hardware if you plan to move a hitch from one vehicle to another. For that you would need part # RHK. On the product page you would need to enter the part number and hitch manufacturer info you need.
view full answer... - Adapting Thule Evolution Cargo Box to fit Factory Crossbars on 2001 Nissan Xterra
- According to my contact at Thule, there are two options that will get your Evolution cargo box to fit on your Xterra.
The first option would be to replace your existing mounting hardware with part # TH04997. This is not the nice, easy snap hardware that your box has now, and might involve slight modifications to the hole pattern of the box, but it would work according to Thule.
Your other option would be to retain your existing mounting hardware for the box, but go with a smaller diameter...
view full answer... - 2001 Nissan Xterra Recommended Parts Needed to Tow a Trailer
- To get towing with your 2001 Nissan Xterra you need a trailer hitch, wiring, a ball mount kit, and possibly a brake controller depending on the size of your trailer (typically it's required for a trailer at or over 2,000 lbs).
I recommend picking up the Curt Trailer Hitch # 13183, 4-Way Wiring # C59496 if you don't have the factory tow package or the T-Connector # C55244 if you do, and Ball Mount Kit # 989899. This gives you everything you need for towing a smaller trailer.
If you're...
view full answer...
Go To Results