While a front mount cargo carrier that attaches to Blue Ox base plates is not offered, we do have a solution for you to install a cargo carrier, but it needs to be on the back of your Jeep or mounted to the top. Using the rear mounted hitch, you can install a carrier such as the etrailer # e98874.
Normally a front mount hitch would be available, but since the hitch and the base plate kit you have installed share the same installation location, they cannot both be installed so mounting... view full answer...
To flat tow your 2002 Jeep Wrangler TJ, I recommend the Roadmaster XL Base Plate Kit - Removable Arms # 1420-1. The arms of this kit can be removed when you are not towing your Jeep to maintain the look of the Jeep.
For a tow bar that is compatible with these base plates, I recommend the Roadmaster Falcon Tow Bar # RM-520. This tow bar features a quick-disconnect system to allow you to quick and easily mount and remove the tow bar. The telescoping arms help make hook up easier and will... view full answer...
Please take a look at the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars for 1" Thick, # RM-035-1. This adapter bracket let you use your Roadmaster tow bar to tow your off-road vehicle with bumper-mounted D-rings. The brackets attach to 1" thick shackle mounts on bumpers approved for flat towing and is compatible with all Roadmaster motor-home-mounted tow bars.
Please note the attached video links to product reveiw and installation videos. view full answer...
If you are talking about the hole spacing for Westin Max bull Bar # 46-43635 the center to center distance between the holes is 31-1/4 inches. But there isn't a bull bar that fits a 1995 Jeep Wrangler, at least not one that we carry. I have included a link to the options that we do have. view full answer...
A great starting point for your trailer project is the linked article that covers the components and processes for adding hydraulic drum brakes to a trailer. Your trailer will need to have brake flanges or you can have them added by a qualified welder. You'll need to select hub/drum assemblies that use the same bearings and bolt pattern as your existing hubs to ensure that they will fit your spindles and wheels. You'll choose hydraulic drum brakes to fit those hubs and to match your 3000-lb... view full answer...
Good news! We have both the adapters # RM-035-1 and # RM-035 right here on our website.
These Roadmaster adapters will adapt the Roadmaster tow bars to off-road bumpers. This will allow you to connect motorhome-mounted tow bars to the bumper mounts. The bumper mounts can have either a 7/8 inch or 1 inch diameter hole. The # RM-035-1 is for bumper mounts that are 1 inch thick and the # RM-035 is for bumper mounts that are 3/4 inches thick. view full answer...
We do offer Bestop replacement tinted windows for their Jeep tops, but the rear and side windows come together as a set. A rear window only is not offered as a separate item.
The link provided will show you the various Bestop kits we offer. These are available for the four types of tops: Replace-A-Top, Supertop, Sunrider and Trektop NX. The two linked articles will help you identify which top you have and which replacement window kit you need.
For example, if you have the Replace-A-Top... view full answer...
The Blue Ox Bolt-On Base Plate Bracket Kit, # BX88230, will require that you drill into your bumper and the bumper will most likely need to be reinforced or modified.
I spoke with my technical contact at Bestop regarding the HighRock 4x4 High Access Front Bumper, # B4291701, and any modifications, including drilling, will void the warranty for the bumper. Due to the fact that the Bestop bumper has not been tested for flat towing, they can not recommend that you use it for this purpose.
The... view full answer...
The base plate kit we offer that would work on the Bestop HighRock 4x4 High Access Front Bumper with Winch Plate # B4291701 would be the Blue Ox Universal kit part # BX88230. This would need to get bolted to the bumper. view full answer...
Yes, after doing a little research, I have determined that you can use the Bestop Full-Length Header Bikini (Safari Version) with Windshield Channel, # B5258435-B51243. If you do not need the Windshield Channel (required for installation), the top is # B5258435. I have included a link to the installation details below. These parts will fit up to the 2011 Jeep Wrangler Unlimited. view full answer...
We have exactly the adapter you need to allow your tow bar to remain level when connecting your towed Wrangler and your motor home or other tow vehicle.
The Roadmaster High-Low Hitch Adapter # RM-048-6 is designed for use with tow bars and will give you the 6-inches of rise that you need to level your hitch and toad. This adapter fits a 2-inch hitch. Please refer to the linked video. view full answer...
The factory side mirrors are attached to the hard doors of the 2012 Jeep Wrangler Rubicon 2 Door. When you remove the hard doors the side mirrors will also be removed.
The Bestop 2-Piece Soft Front Doors, part # B5179835, for your Jeep will not come with side mirrors. You will need to add the following Bestop replacement side mirrors that will attach to the soft doors. I am including a link to the installation instructions on the Bestop soft front doors.
I have three choices of Bestop... view full answer...
Yes, we do have plug-n-play wiring options to provide towed vehicle lights and trailer lights on your 2015 Jeep Wrangler. You will want to use the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118416 and the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56200.
The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118416 would plug into the plug behind the drivers side tail light and then the Hopkins Custom Tail Light Wiring Kit for Towed... view full answer...
There is an LED bulb and socket that you can use for flat towing. It is # RM-152-LED. The LEDs are red which work better than white lights if behind a red lens. I have linked a video showing an example installation for you. view full answer...
As long as you stay under 3,500 pounds you should be fine. There are no kits that will increase a vehicle towing capacity. Whatever towing capacities they were built with from the factory is what they can handle.
If you found the 3,500 figure on the hitch, you may want to check the vehicle owner manual. The 3,500 figure may be the weight capacity of the hitch. The vehicle may be able to tow more or less depending on vehicle configuration. view full answer...
We offer side steps like the Carr Custom-Fit Side Steps # CARR102551 which are intended to be used in place of a running board, but since they are a bolt on design you could just drilling into the running board to attach these steps. There are some steps on the market that clamp onto specific running boards, but we don't currently offer any with this design at this time. view full answer...
After speaking with Bestop your best option would be just to replace your Sunrider with a new top. I recommend the complete and top. You can choose from the Bestop Trektop NX Soft Top for Jeep - Sunroof and Tinted Windows - Black Denim Sailcloth # B5682015 or the Spice Sailcloth # B5682037 which is the dark tan you referenced. view full answer...
Please note that all winches we sell, whether manual hand-crank types or AC-powered units like the Dutton-Lainson StrongArm Electric Davit Winch # DL25032, are not to be used as hoists for lifting, supporting or transporting people, or for handling loads over areas where people could be present.
This safety statement should be considered carefully as there could potentially be liability exposure
if you use a product in an application specifically excluded by the manufacturer. Therefore... view full answer...
I have an answer about the availability about a tan-colored tonneau cover for your 1990 Jeep Wrangler. However, the Pavement Ends Cargo Cover for Jeep - Black Denim # PE4180515 is only available in black denim. The only other color option we have for the tonneau cover is the black Rampage Soft Tonneau Cover for Jeep # RA701001. There are no tan or spice colors available. view full answer...
For your 2006 Jeep Wrangler Rubicon we have the parts needed to flat tow it behind a motorhome. The Roadmaster Direct Connect Base Plate Kit part # RM-521424-5 is a confirmed fit and the easiest to use.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For... view full answer...
Go To Results