For your 2019 Subaru WRX Sti with large factory spoiler I recommend the Yakima FullBack 2 carrier # Y02634 or the 3-bike version # Y02633 because both are specifically designed to work with this vehicle feature.
Both of the FullBack racks include locks, have adjustable arms that can be moved to provide the best fit with your bikes' frames and both install using only 4 straps, instead of the more typical 6 mounting straps found on most other trunk-mount racks. You can refer to the linked... view full answer...
Yes, for your 2018 Subaru WRX we have the EcoHitch part # 306-X7257 that installs behind the rear appearance cut out like you mentioned. If you check out the attached picture you'll see a ball mount going through the opening in the bumper and attaching to the hitch. This hitch also fits the STI models too.
If you need trailer wiring too the kit I recommend is the Curt part # C56259 because it installs without requiring any splicing and because it has the most reliable converter box of... view full answer...
The online edition of the owner's manual for your 2016 Subaru WRX notes on page 8-10 that low-profile S-Class tire traction devices can be used on the car's front axle only. It further states that you should use only devices rated by their manufacturer as suitable on your specific tire size.
We do have options for your P245/40-18X tire size that are shown on the linked page. These do not include any of the ISSE snow socks, please note.
If you are looking for low-cost chains that will... view full answer...
Yes, I spoke with my contact at Curt and the Curt Hitch part # C11408 that you referenced has been confirmed to fit the 2015 Subaru WRX so it will work for you. The hitch will hang below the rear bumper when installed. I attached a picture that shows this hitch installed as well.
For a ball mount you would want part # C45521, 1-7/8 inch hitch ball # 19256, 2 inch hitch ball # 19258.
For trailer wiring you would want the part # C56259. view full answer...
The Curt trailer hitch # C11408 will not be concealed behind the rear fascia of your 2015 Subaru WRX. The cross tube and receiver will be visible beneath the rear fascia. Take a look at the installation instructions I have linked that shows some pictures of the hitch position.
If you plan on doing some towing the correct ball mount to use is # C45521. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring use # C56259.
If you will be using the hitch... view full answer...
The correct Rhino-Rack ROC25 for your 2018 Subaru WRX is the Rhino-Rack ROC25 Roof Rack for Naked Roofs - Vortex Aero Crossbars # RR37GR.
You will not need any additional parts as the # RR37GR comes with everything you need for installation. view full answer...
I recommend using the Curt Trailer Hitch Receiver # C11408 along with the Curt T-Connector # C56259 because I like the way the squared Curt hitch looks on the WRX over the round Draw-Tite version. The Curt trailer hitch comes with a limited lifetime warranty and is assembled in the USA, and the T-Connector is the corresponding wiring kit for your 2019 Subaru WRX. I have attached install videos and a few pictures of this hitch installed for you to reference.
To complete a towing setup you... view full answer...
If the fishwire you are needing is to help you install the Curt hitch part # C11408 on a 2016 Subaru WRX like you referenced the correct one you would need is the part# C58400 which is a 1/2 inch bolt leader/fishwire. view full answer...
In order to setup a 2016 Mazda CX-9 for towing a trailer with brakes you'll first need a trailer hitch for which I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76020. Then you can add the wiring, the T-One Vehicle Wiring Harness part # 118278 would be what you need to start as that's all that is available but you can easily convert this 7-way using the 4 to 7-Way and 4-Way Adapter part # ETBC7L. This kit also comes with everything you need to add a wireless brake controller... view full answer...
For the Rhino-Rack ROC25 Roof Rack for Naked Roofs part # RR37GR on my 2015 Subaru WRX what is the best fairing will be the Rhino-Rack Fairing for Roof Racks part # RRRF2. This will give you the perfect fit and help to reduce any remaining wind noise. view full answer...
The only hitch we carry for your 2015 Subaru WRX that will allow you to use your dirt bike carrier is the EcoHitch Invisi Trailer Hitch Receiver # 306-X7257. This is a 2 inch receiver that is rated for tongue weight of up to 525 lbs, so it is the best option for this combination. I also recommend the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches # 63232 to secure your single dirt bike rack to this hitch. I've attached a photo of this fit to assist.
The Class I hitches are rated... view full answer...
For your 2018 Subaru WRX, the EcoHitch Invisi Trailer Hitch Receiver # 306-X7257 is a confirmed fit. There is no drilling required, but there is some minor fascia trimming and heat shield trimming required. This hitch will be hidden and will use the factory knockout panel location. I've attached a photo of this fit to assist as well.
For your wiring harness, I recommend the Curt Wiring Harness with 4-Pole Flat Trailer Connector # C56259 which is a confirmed fit. This custom-fit T-One... view full answer...
For carrying an E-bike on a 1-1/4 inch hitch the best solution will be the Thule Easyfold part # TH903202 which is specifically designed for heavier E-bikes like yours and would work well. It has a ramp that pulls out to make loading and unloading the heavier bikes easier as well.
I attached a review video for this rack for you to check out as well. view full answer...
The Thule WingBar Roof Rack # TH711420, # TH710501, and # TH145178 for your 2018 Subaru WRX that you have will have the front bar sit 9 inches from the windsheild line to the front of the front foot. Then the second bar will sit 31-1/8 inches behind it measured on center. view full answer...
For your 2020 Subaru WRX I recommend the EcoHitch part # 306-X7257 as it has plenty of towing capacity for your camper but also because it's only option that fits behind the rear bumper panel of your vehicle for a concealed look and also better ground clearance. See attached picture and install video for more info.
For trailer wiring then the Tekonsha kit part # 118768 is the best option as it's very easy to install and comes with a very reliable converter box.
Since you wanted to do... view full answer...
According to my Thule representative, the height of the spoiler on your vehicle would prevent you from installing a trunk mounted bike rack, but there are options that would allow you to carry two bikes.
Your best bet would be to install a hitch like the Curt Class I, part # C11408 and use it as an attachment point for a hitch mounted bike rack. My favorite bike rack right now is the Kuat Beta, part # B202-114. The rack is super strong, but its aluminum construction means its only about... view full answer...
The hitch you currently have will not fit a 2017 Subaru WRX. The WRX is different enough from the XV that it requires it's own fit. For that the Curt hitch part # C11408 would be what you would need.
I attached an install video for this hitch on a 2017 WRX for you to check out as well. view full answer...
The owner's manual for your 2017 Subaru WRX does not recommend towing a trailer therefore, a tongue weight capacity is not explicitly listed. There is a tongue weight capacity for the trailer hitch but if the vehicle is lower then that will need to be the figure you abide by. However, there is a vehicle weight capacity which will include the weight of all passengers, the weight of all cargo, and in your case the weight of the trailer hitch and anything on it. The vehicle weight capacity... view full answer...
I would be happy to help!
The Draw-Tite Trailer Hitch Receiver # 24968 you were looking at for your 2018 Subaru WRX will measure 2" from the center of the hitch pin hole to the most outward edge of the bumper.
Since the Thule T2 Classic 2 Bike Platform Rack - 1-1/4" Hitches - Tilting # TH9045 you mentioned measures 3-1/2" from the center of the hitch pin hole to the closest edge of the rack when it is folded up this rack would fit and work perfectly.
The # TH9045 has a 100lb (50lbs per... view full answer...
Yes, I do recommend the Curt trailer hitch # C11408 for your 2015 Subaru WRX STi model. Since you want to use the hitch for a bike rack you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch.
Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load (such as a bike rack or cargo carrier) per their warranty requirements.
For a compatible... view full answer...
Go To Results