The Roadmaster base plate kit part # RM-52924-5A is a confirmed fit for all models of the 2020 Subaru WRX so it fits your STI model.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For lighting/safety cables, locks, and covers for the... view full answer...
When it comes to a trailer hitch receiver for your 2015 Subaru WRX, a 1-1/4 inch Class I hitch, part # C11408, is the only one available. A 2 inch hitch is not available for the 2015 Subaru WRX.
If you are planning to use the hitch to transport bicycles, I have attached a link to our bike racks that are compatible with the Class I hitch. If you are interested in a different hitch mounted accessory, please feel free to send me an email with that information and I would be happy to make... view full answer...
When we installed the EcoHitch # 306-X7257 on a Subaru WRX, we found that the receiver sat right at 17 inches in height. I'd recommend going with the # D-4 ball mount, and Hitch Pin and Clip, # PC3, with # 19260 for a 1-7/8 inch ball or # 63845 for a 2 inch drop. For a trailer wiring harness, use # C56259.
Once the trailer is hitched up, the trailer's tongue weight will cause the rear of the WRX to settle a bit, which would put the ball height at about 17 inches which will be perfect for... view full answer...
I'm assuming you're wondering if the exhaust of the 2015 Subaru WRX needs to be altered in order to install the Curt Class I trailer hitch, part # C11408, is that correct?
According to the instructions, which you can look over by clicking the provided link, the exhaust will need to be temporarily lowered out of the way during installation, and the heat shield will be temporarily removed so a small hole can be cut in it.
If you'll be towing with your WRX, you'll also need the following... view full answer...
There is a high-quality option for a roof rack and roof-mounted bike rack for your 2022 Subaru WRX, but I checked with the manufacturers, and there are no trunk-mounted bike racks for your Subaru. So you'll need to go with a roof rack, and starting with the rack, the option that fit is from Thule, and consists of the following parts:
- Thule WingBar Evo Crossbars - Silver # TH711300 or Black # TH711320
- Evo Fixpoint Feet for Thule Evo Crossbars # TH49SC
- Fit Kit # TH88RE
When it comes... view full answer...
As long as your 2018 Subaru WRX has the center knockout panel in the rear bumper for a trailer hitch we do have a 2 inch receiver that fits; the EcoHitch, part # 306-X7257. I've attached a picture so you can see where it fits through the bumper. I've also linked the install details for you.
If you don't have the knockout panel then the only hitches available for you are 1-1/4 inch receivers. In this case your best option may be to replace your rack with a trunk mount. The Yakima FullBack,... view full answer...
I spoke with my contact at Yakima who said that the adapter sleeve that comes with part # Y8890203 that you referenced is not available by itself. You will need a replacement tongue.
For that the recommended option is the Replacement Shank # Y8880041 along with the hardware to secure it to your hitch receiver # Y8780022. view full answer...
The hitch you currently have will not fit a 2017 Subaru WRX. The WRX is different enough from the XV that it requires it's own fit. For that the Curt hitch part # C11408 would be what you would need.
I attached an install video for this hitch on a 2017 WRX for you to check out as well. view full answer...
I confirmed with Thule that, unfortunately, the pads of # THKIT3131 cannot be purchased independently from the rest of the hardware. view full answer...
I would be happy to help!
The Draw-Tite Trailer Hitch Receiver # 24968 you were looking at for your 2018 Subaru WRX will measure 2" from the center of the hitch pin hole to the most outward edge of the bumper.
Since the Thule T2 Classic 2 Bike Platform Rack - 1-1/4" Hitches - Tilting # TH9045 you mentioned measures 3-1/2" from the center of the hitch pin hole to the closest edge of the rack when it is folded up this rack would fit and work perfectly.
The # TH9045 has a 100lb (50lbs per... view full answer...
The correct attachment that you will need to mount the Yakima Raptor Roof Mounted Bike Carrier 8002085 on a Rhino Rack Euro Crossbar is the Yakima SnapAround Mounting Brackets part # Y8810135. If your Yakima Raptor already has these installed then you won't need anything else but if you have a different set of attachments like the Mighty Mounts then you will need the above. view full answer...
I recommend using the Curt Trailer Hitch Receiver # C11408 along with the Curt T-Connector # C56259 because I like the way the squared Curt hitch looks on the WRX over the round Draw-Tite version. The Curt trailer hitch comes with a limited lifetime warranty and is assembled in the USA, and the T-Connector is the corresponding wiring kit for your 2019 Subaru WRX. I have attached install videos and a few pictures of this hitch installed for you to reference.
To complete a towing setup you... view full answer...
We do have an option for a flush-mounted roof rack that fits your 2018 Subaru WRX, and I recommend going with the Rhino-Rack roof rack:
- Rhino-Rack ROC25 Roof Rack # RR37GR
The reason I like the Rhino-Rack is because it is the best overall value for a roof rack; you won't be losing out on quality or functionality, and you'll be getting it at a better price point. Essentially, what you get with Rhino-Rack is a strong, quiet roof rack without having to pay to have a certain brand name... view full answer...
When it comes to towing, you are always going to be bound by the component with the lowest capacity so even though the hitch can handle more weight, your vehicle can not. Since you mention that the tongue weight capacity of your vehicle is 165 lbs, a 280 lb power chair would exceed the tongue weight capacity and could cause damage to your vehicle but I do have a solution. The best solution would be to buy a lightweight trailer to transport your power chair.
The hitch that we offer for... view full answer...
Yes, I checked with Thule and the Thule Canyon XT Roof Cargo Basket part # TH859XT is a confirmed fit for your 2013 Subaru WRX Hatchback. If you like, you can also add the Thule One-Key System Lock Cylinders part # TH450400 which will allow you to lock the basket to your vehicle or the Extension Piece part # TH8591XT to provide you with an additional 20" of space. view full answer...
Between the Thule Pulse Medium Rooftop Cargo Box - 14 cu ft - Matte Black Item # TH614 and the Thule Motion XT Alpine Rooftop Cargo Box - 16 cu ft - Black Glossy Item # TH629506 the Motion XT Alpine is going to be quieter. It's a slimmer design which measures 90-1/4" long x 37-1/2" wide x 13-1/4" tall which is a little longer than the Thule Pulse which measures 67" long x 35" wide x 16" tall. With The Motion XT you are also gaining 2 extra cu ft of space. view full answer...
For an emergency set to keep in your 2018 Subaru WRX with the tire size 245/40-18 the Glacier cables part # PW1038 would be your best option. view full answer...
There are pros and cons to a design like this product yearning for pure invisibility. While it's certainly a nice aesthetic, it's understandable that the flushness of it might create some clearance issues that would otherwise be absent with other receivers.
I don't have a photo, but on the install video that I've attached, at the 1:19 mark of the video, the installer shows a flexibility in the bumper/rear fascia material that allows him to manipulate his hands to access the locking pin... view full answer...
It is possible to wire your 2013 Subaru WRX for towing, even though there is no custom wiring harness available. If your vehicle did not come equipped with a 4-way flat connector, then I'd start by recommending a converter kit such as the # C59496
If your trailer application requires the use of an electronic brake controller, I recommend supplementing the Wiring with our # ETBC7 to add the 7-way to the rear of the vehicle, and the very easy to use Curt Echo Wireless Brake Controller # C51180. view full answer...