For your 1997 Jeep Wrangler the part # RA68736 only requires that your Jeep has factory full steel doors and a hardtop.
All of the needed hardware would be included with the kit. view full answer...
If your tire diameter is right at or slightly under 39 inches then you will want to go with the Adco Ultra Tyre Gard RV Wheel Covers # 290-3950 in Polar White. These covers come in a quantity of 2 and fit tire diameters of 36" to 39". The covers quickly slip over your tires and repel liquid as well as UV rays and other environmental hazards that would normally damage the sidewalls of your tires.
If, however, your tire size is pushing the 39 inch mark then you will want to go with part... view full answer...
We have a good solution but the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118356 is for older model Wranglers.
Instead the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118409 is the one that will fit. Check out the video on the installation I've linked for you. view full answer...
Yes, the Curt Custom Base Plate Kit # C32KR for your 2006 Jeep TJ will also fit with a Blue Ox tow bar.
For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. If you do not have all of these components just let me know and I can make some additional recommendations for you. view full answer...
The Hopkins Fold-Over Mounting Bracket # HM48595 that you referenced is a universal fit. This means that it will be compatible with most, but not all 4-Way connectors that are out there as design can vary between manufacturers.
You can use the internal dimensions of 1-1/3" wide x 1/2" tall (see attached photo) to help you determine if it will work for you application. view full answer...
The Draw-Tite Max-Frame part # 75193 provides 400 lbs of tongue weight capacity and is a confirmed fit for your 2004 Jeef TJ Unlimited. view full answer...
We have a number of winch strap options for you to choose from. Most winch straps measure 2 inches wide, so the length of the strap and the working load limit are the factors to consider when choosing a new strap.
If your OE winch is a Fulton winch, we offer the Fulton Heavy-Duty Winch Strap with Hook # FWS20HD0200. This winch strap is 2 inches wide x 20 feet long and offers a safe working load limit of 4,000 pounds with a break strength of 10,000 pounds. This winch works well on Fulton... view full answer...
If you have a hard top with a naked roof you can use the Thule WingBar Evo Crossbars # TH711520 with the Rapid Gutter Feet for Thule Crossbars # TH93ZR.
If you have the hard top removed you can use the same bars mentioned above but with the Evo Raised Rail Feet for Thule Crossbars # TH710401.
These bars measure 53" long x 3-1/8" wide x 1" tall, has t-slot dimensions of 3/4" wide x 1/8" tall, and has a 220 lb weight capacity. view full answer...
The Blue Ox Patriot part # BLU37TR is a great supplemental braking system for your 2003 Jeep Wrangler TJ that is getting flat towed. It's very easy to use and install and uses an inertia sensor to detect how hard you are applying the tow vehicle brakes and apply a similar intensity to the tow vehicle brakes.
This would work great with a magnetic tow bar lighting solution like the Optronics part # TL21RK and would not require a brake light relay or anything else. view full answer...
The etrailer Invisible Base Plate Kit, # e98946 installs to the factory front bumper of the 2000 Jeep TJ with two 1/2” x 1-3/4” hex bolts plus the center support brace hardware. view full answer...
According to my contacts at Air Lift, their vehicle suspension kit # AL80702 is confirmed as a fit on your 1999 Jeep TJ, that has a 3 inch lift. This kit will install inside of your current coil suspension on the front axle. It provides additional support when using your snow plow, for both leveling and the handling of your vehicle.
I have checked with my contacts at Timbren, and to determine the correct fit for your 3 inch lifted Jeep, you will have to take some measurements. The measurement... view full answer...
I reached out to my contact at Flex-a-Lite and was able to confirm that the 16" Flex-Wave Electric Fan # FLX236 does in fact install directly onto the radiator core. The 16" Flex-Wave LoBoy Auxiliary Electric Fan # FLX238 is also a universal fan that installs directly onto the radiator, but it's slightly thinner and provides more air flow at 3,000 CFM, so if you don't need the reversible feature, this is the one I recommend for your 2005 Jeep Wrangler with the 4.0 L V6 engine.
For a fan... view full answer...
I took a look at the Roadmaster BrakeMaster Braking System with BrakeAway part # RM-9060 and in regards to mounting the breakaway cylinder, the following instructions are given in the manual.
"Choose a location for the air reservoir. The air reservoir is mounted in the towed vehicle, most
often in the engine compartment, but it may be attached anywhere an air line can be routed from the top of the air reservoir to the front of the vehicle, and where the drain valve, at the bottom of... view full answer...
Yes, this is something that can be done. You will need some extra parts to make this work. If you want to flat tow your 2004 Jeep TJ with the Bestop HighRock 4x4 High Access Front Bumper w Winch Plate for Jeep - Matte Black, part # B4491701, you will need the Bestop D-Ring Shackle Set for 4x4 HighRock Bumpers - 9,500 lbs - Qty 2, part # B4292100, and the Blue Ox Aftermarket Off-Road Bumper Adapter - 7/8" Pin, part # BX88357. You will need to attach the D-Ring shackles to your bumper and... view full answer...
A braking system like your Ready Brake and a tow bar like your Ready Brute are two of the items needed for safe and legal flat towing. The other components include safety cables, a wiring/lighting kit, a high/low hitch adapter to keep the tow bar level when it is connected and either base plates on the towed vehicle or a tow-rated aftermarket bumper.
Base plates and adapters for the 1997 TJ appear on the linked page and the right one depends on the bumper setup. You can use the drop-down... view full answer...
A front-axle suspension enhancement kit for your 1998 Jeep TJ is an excellent idea if you will be using a snowplow/winch set-up. We offer a range of suitable products whose fits will depend on whether your TJ is 4WD or 2WD. We offer several options if 4WD and one if 2WD.
If you have a 4-wheel-drive TJ a great option that is cost-effective and simple to install is the Super Springs # CSS-1168F. This kit consists of two microcellular polyurethane foam springs that insert between the turns... view full answer...
In order to recommend a replacement spring for you, I'll need to know for certain who the manufacturer of the brake assembly is. A photo would be helpful, as well.
If your 10 inch brake assembly is from Dexter, we might have replacement springs. If you click the provided link, you can see the replacement springs we have that are compatible with a 10 inch brake assembly.
If you can reply with more information for me, I'd be happy to help. view full answer...
Yes, the Curt Custom Base Plate Kit, # C32KR is a confirmed fit for the 2005 Jeep TJ. It is compatible with Curt and Blue Ox tow bars. I suggest the Curt Rambler Steel Tow Bar for Curt and Blue Ox Base Plates, # C26FR. This will have the needed safety cables with it, so no additional purchase needed.
Other parts you may need to flat tow your TJ are, wiring for the lights, a supplemental braking system, and a high-low adapter.
To power the Jeep's lights the Roadmaster Diode 7-Wire to... view full answer...
The Replacement Locking Knob for Yakima SpareTime/SpareRide 2 Bike Rack # 8890239 comes with a control key to remove or install a lock core, but this does not have a lock core integrated. It will function without a lock but for the locking feature you will need to add a lock core from the knob you are removing or add a new one using # Y07202. view full answer...
To flat tow your 2002 Jeep Wrangler TJ, I recommend the Roadmaster XL Base Plate Kit - Removable Arms # 1420-1. The arms of this kit can be removed when you are not towing your Jeep to maintain the look of the Jeep.
For a tow bar that is compatible with these base plates, I recommend the Roadmaster Falcon Tow Bar # RM-520. This tow bar features a quick-disconnect system to allow you to quick and easily mount and remove the tow bar. The telescoping arms help make hook up easier and will... view full answer...
Go To Results