bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Hyundai Sonata


  • Will the Heat Shield Need to be Modified on a 2012 Hyundai Sonata GLS When Installing a Hitch
  • Yes, to install the Curt Class-I trailer hitch # C11025 you referenced, you will need to remove the heat shield during installation and modify it when reinstalling. When pushing the heat shield back into place, you will most likely need to modify or bend it into position to re-install. Take a look at the installation video at the 0:59 and 6:47 minute mark and the helpful article I included for you.
    view full answer...

  • Will Removing Heat Shield to Install Hitch on 2020 Hyundai Sonata Cause Damage to Vehicle
  • The heat shield needs to be removed in order to install the Draw-Tite # DT74MR on your 2020 Hyundai Sonata because it prevents the hitch from being in direct contact with the mounting surface on the underside of the vehicle. The good news is that the steel the hitch is constructed of will serve the same purpose as the heat shield, which is to isolate the vehicle underbody from the heat generated by the exhaust. In other words, removing the heat shield to install the hitch will not have...
    view full answer...

  • Does Removing Portion of Heat Shield To Install Trailer Hitch on 2016 Hyundai Sonata Harm Vehicle
  • Actually, removing the heat shield when installing the Draw-Tite # 24965 receiver hitch on your 2016 Hyundai Sonata isn't a problem because the hitch itself provides more heat protection than the flimsy sheet metal that the heat shield is constructed of. Removing a portion of or even all the heat shield is a pretty common occurrence when installing a trailer hitch. I've linked the installation video for reference. I've linked the installation video for the # 24965 for your convenience.
    view full answer...

  • Does the Exhaust have to be lowered to Install a Trailer Hitch on a 2009 Hyundai Sonata
  • Installation on a 2009 Hyundai Sonata with single exhaust is going to be nearly identical as in the video showing installation of Draw-Tite Trailer Hitch, # 24757, on a 2010 model. The two different years are part of the same generation and the hitch attaches the same way in both models. This is quite possibly the easiest installation I have seen for a hitch. Even the instructions, which I have linked for you, have just 2 steps. Neither our installers nor the hitch manufacturer mention...
    view full answer...

  • How To Run Power Wire for Trailer Wiring Harness On a 2019 Hyundai Sonata
  • The trailer wiring harness I recommend for a 2019 Hyundai Sonata is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56390 which is almost entirely plug-n-play. In regard to installation, the two pigtails plug in behind the taillights, the white wire needs to be grounded, then the black power wire gets run to the battery. In regard to the exact path to take, neither we nor the manufacturer provide instructions for this because it varies so much from install...
    view full answer...

  • Installing The Sportrack Semi-Custom Roof Rack # SR1002 On A 2013 Hyundai Sonata
  • I have attached the installation details for your SportRack Semi-Custom Roof Rack for Naked Roofs - Square Crossbars - Steel - 50" Long # SR1002 and have attached a photo of the measurements you need for your convenience. I've also attached a review video to assist. Please let me know if you have further questions.
    view full answer...

  • Does Draw-Tite Class I 24965 Replace Factory Heat Shield When Installed on 2013 Hyundai Sonata
  • You're exactly correct. Once the # 24965 hitch is installed, it will act as the heat shield protecting the gas tank from the heat given off by the exhaust system. You needn't worry about the portion of the shield that's trimmed away, the hitch is constructed of much heavier and thicker metal than the very thin metal the heat shield is constructed of. If you'll be using the hitch for light duty towing, you'll need a few other items to complete your towing system. For a trailer wring harness,...
    view full answer...

  • What Vehicles Does Curt Hitch # C11325 Fit
  • The Curt hitch part # C11325 that you referenced fits 2006-2010 Hyundai Sonatas.
    view full answer...

  • How Does The Battery Isolation Solenoid Work?
  • The Battery Isolation Solenoid, # PK5231201, is not the same thing as a starter solenoid or the Ford solenoid but could be used in a similar way. This solenoid is intended to isolate the power to the trailer so it doesn't drain the battery of your towing vehicle when the ignition is switched off. It is rated for 100 amps. This protects your trailer from draining your vehicle battery while still connected and leaving you needing a jump start or forgetting to plug in your trailer back...
    view full answer...

  • Can a 2011 Hyundai Sonata Tow a Trailer Using the Draw-Tite Sportframe Hitch
  • Regarding towing, what the owners manual states is "don't tow a trailer during the first 1,200 miles (2,000 km) of operation," and "we do not recommend using this vehicle for trailer towing." The Draw-Tite Sportframe # 24965 has a towing capacity of 2,000 lbs with a tongue weight of 200 lbs. The limiting factor will be between the hitch and your vehicle, whichever has the lower towing capacity. Since there is no listed towing capacity, I recommend reaching out to your dealer to see if...
    view full answer...

  • Size of Install Bolts that Come with the Draw Tite Hitch 24757
  • The included bolts that the part # 24757 uses for installation are M10 x 1.25 x 40mm Hex Bolt. For a full replacement kit for the hardware for this hitch you would want part # RHK. You would need to enter the part number for this hitch and select Draw Tite as the manufacturer.
    view full answer...

  • Recommendation For Tow Bar Wiring Kit on a 2012 Hyundai Sonata with Manual Transmission
  • The Roadmaster EZ Base Plate Kit, part # 521631-1, will only fit the 2012 Hyundai Sonata with 2.4L engine and a manual transmission. I am including a link to the installation instructions on the # 521631-1 base plate kit for your Sonata. They are very detailed instructions with pictures that will show what is involved in installing the base plates. It should give you a good idea if you will be able to tackle the installation yourself. There are two choices for a light wiring kit when...
    view full answer...

  • Does the Curt Hitch Receiver Fit the 2010 Hyundai Sonata with Dual Exhaust?
  • Yes, the Curt Trailer Hitch Receiver item # C11325 you referenced does fit the 2010 Hyundai Sonata with dual exhaust. I have linked a video of the hitch receiver being installed on a dual rear exhaust model so you can see the process for yourself.
    view full answer...

  • How To Install Trunk Mounted Bike Rack On 2018 Hyundai Sonata
  • I have a replacement option for you, but since Rhode Gear went out of business we unfortunately do not have a video for installing a Rhode Gear Pro Trunk Bike Rack, and I can not confirm that it will fit your vehicle. If you are unable to get it to fit your 2018 Hyundai Sonata I recommend replacing the rack with the Yakima FullBack 3 Bike Rack # Y02633 which is confirmed to fit your vehicle, and will allow you to carry 3 bikes weighing up to 35lbs each, but you will be limited to a total...
    view full answer...

  • Setting Up SportRack Short Roof Adapter for a SportRack Roof Rack
  • The short roof adapter # SR1116 is not needed for the 2011 Hyundai Sonata. When I run the vehicle through our fit guide the SportRack roof rack that comes up is # SR1002 and the adapter is not listed as required or even recommended. We just have a note that states that it may be needed. With this roof rack installed the crossbars will be 26 inches apart on center which is more than enough to not have to use the adapter. But the reason that it is not fitting is actually because you need...
    view full answer...

  • Does The Curt Receiver item # C11402 Come with Fishwire and Necessary Tools to Install?
  • The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" item # C11402 comes with the fishwire and all necessary hardware but not the socket wrench, 10 mm socket, or prybar you will need to complete your install. I have linked the installation instructions.
    view full answer...

  • Best Drill Bit for Enlarging Frame Holes in a 2018 Hyundai Sonata for Trailer Hitch
  • The step-up drill bit that you are using is great for many things such as large holes but when drilling smaller uniform holes in thicker metal they are not the best tool to use. Instead, you will want to look into a standard drill bit that is designed for metal such as the 1/2" Titanium Drill Bit part # PTW8589. I would also be sure to use some sort of lubricant and a high powered drill. The combination of these three items will make for the most seamless process. If you have a neighbor...
    view full answer...

  • Can Hollywood Racks Trail Rider Bike Rack be Used as Single Bike Rack
  • Yes, you can avoid installing the outer trays and hook on the Hollywood Racks Trail Rider Bike Rack # HR200Z during assembly since you'll only be carrying 1 bike at the back of your 2022 Hyundai Sonata. Then you can just keep the extra pieces stored away in case you every need to replace something or you need to carry another bike. Attached is a review video for you to check out.
    view full answer...

  • Installation of Standoffs Included with Stromberg Carlson RV Exterior Ladder LA-401
  • The four included stand-offs in the Stromberg Carlson RV Exterior Ladder # LA-401 have fixed positions on the ladder. You can see this in the photo I linked for you which shows the stand-offs and the uprights where the stand-offs screw into place. We do offer 5-inch Replacement Ladder Support Pegs # 8535 which can be added for additional flexibility in your installation to allow you to match up the mounting points to the RV's structural/frame members.
    view full answer...

  • Does Heat Shield of 2020 Hyundai Sonata Need to Remove to Install Draw Tite Trailer Hitch
  • The heat shield of the 2020 Hyundai Sonata gets in the way of the Draw Tite hitch part # DT74MR from fitting. If you check out the included instructions you can see that the hitch installs on top of where the heat shield sits.
    view full answer...