There is a retractable tonneau cover that will fit your 2006 Chevy Silverado 1500 with a 5-1/2' bed that can be driven with the cover partially open, the Pace Edwards JackRabbit Hard Tonneau Cover # 311-JRC3250, though the SwitchBlade Hard Tonneau Cover # 311-SWC3250 does not have the ability to be open partially while you are driving your truck.
The JackRabbit is able to be stopped at points every 12 inches along your Chevy's bed so you can drive with it open at a number of different... view full answer...
Yes, the Custom Underbed Installation Kit for Demco Recon 5th Wheel Trailer Hitch # C60712-5W will fit a 2005 Chevy Silverado 2500HD with a 6-1/2 foot bed as this is exactly the same as the Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit # C60712, but with a different part number.
Having said that, the Demco Recon 5th Wheel Trailer Hitch # DM8550045-5W may not be compatible with your truck and trailer because it is not a sliding hitch and cannot be used with... view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15312 will fit your 2001 Silverado 3500 with the standard factory bumper. This Class V hitch features a bolt-on installation and comes with a lifetime warranty. view full answer...
The K-Source Custom Extendable Towing Mirrors - Electric/Heat - Textured Black - Pair Item # KS62139-40G will replace your mirrors and allow you to retain all extra features you currently have with your mirrors. These custom, power towing mirrors replace the factory mirrors on your Chevrolet Silverado with a simple plug and play design. The mirrors telescope out to extend your lines of sight. view full answer...
The Aluminum Liger Trailer Wheel # LH39FR has a 4.88" pilot diameter. This means the correct cap is the Lionshead Trailer Wheel Center Cap # LHCS109-SI60C. view full answer...
That's a smart idea to make sure the rack fits, so I went ahead and double-checked with the manufacturer for you, and can confirm the Rhino-Rack roof rack does fit your 2002 Chevy Silverado 1500 Extended Cab, and consists of parts # RRVA137B-2, # RRRLKVA, and # DK227.
This is a really nice choice for a roof rack on your truck because Rhino-Rack roof racks offer the same quality as other name brand options but at a better price point so you're getting the best value. view full answer...
The Curt Class V Universal Weld-on Receiver Hitch # 15902 will fit to truck frames that have between 18- and 44-inches between the frame rails. It offers just over 10-inches of drop.
You can measure the distance from your frame rails where this will weld on down to the bottom of the utility body/bumper to determine if the 10-inches of drop is adequate. If not you will be better off using Draw-Tite # 41990-16. This universal-fit hitch is intended for utility body trucks and has brackets... view full answer...
Yes the Detail K2 Summit II Elite Snowplow # K2SUMM8826ELT will fit your 2010 Chevrolet Silverado 2500, and you are correct it does require a custom bracket to mount to the front of your truck, the correct bracket kit is # K283014.
Once you have the brackets installed, the plow has flip down casters to wheel the plow where you need it for storage or hooking up, they're also adjustable to match the height of your Silverado.
One of my favorite features of this plow is the wireless remote.... view full answer...
The Curt Overbed, Folding Ball Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs part # C61341-52 is the rails, hardware, hitch plate and 2-5/6" ball for the 2003 Chevy Silverado the following models:
1500 HD - 6-1/2 Foot Bed
1500 LD - 6-1/2 Foot Bed
1500 LD - 8 Foot Bed
2500 HD - 6-1/2 Foot Bed
2500 HD - 8 Foot Bed
2500 LD - 6-1/2 Foot Bed
2500 LD - 8 Foot Bed
3500 - 8 Foot Bed
If you need just the rails that is part # C61341. This comes with the hardware. If you need just... view full answer...
The answer really depends on how your tool boxes are mounted to your 2005 Chevy Silverado 2500. Since the Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501150 clamps onto your truck's bed rails (see photo), if the main tool box extends out to the rails, and/or if the side mounted tool boxes are up towards the bed rails, then it would not fit.
Each of the ladder racks that fit your truck do in fact clamp to the bed rails so you would likely need to remove the tool boxes to get... view full answer...
I reached out to Air Lift and they explained they only have the Air Lift SlamAir Air Helper Springs # AL59209 listed to fit the 2wd versions of your 2004 Chevrolet Silverado 1500 as that is all they have tested to fit. As most all lowered vehicles are 2wd they have not confirmed fitment on 4-wheel drive. This kit is very similar in design and mounting to the Air Lift Ride Control # AL59501 which fits both 2wd and 4wd.
I was also able to get some information on the dimensions for the Air... view full answer...
The Curt Wiring Adapter # C51520 is intended to plug in between a Curt trailer brake controller such as their proportional Triflex model # C24VV and the end of the Cequent wiring harness used in the brake controller port, such as part # 3025-P which fits your truck. The adapter simply allows mixing brands of controllers and harnesses. view full answer...
The Adarac Pro Series Custom Truck Bed Ladder Rack part # A4001015 is the perfect ladder rack to use with the BAKFlip G2 Hard Tonneau Cover part # BAK26101 on your 2012 Chevrolet Silverado 1500 with the 6-1/2' bed. It is also the only ladder rack that will allow for full unimpeded access.
I have attached a review video for you on a similar truck with a similar tri-fold bed cover as well. view full answer...
I can definitely help you with the same type of setup as part # Y01-140B but currently there aren't any kits that use the 71" Rhino-Rack Heavy Duty crossbars.
The parts that you will need are the Rhino-Rack 71" Heavy-Duty Roof Rack Crossbars # RB1800B-2, the Quick Mount Legs # RRRLT600, and the RTC-Style Roof Rack Tracks # RTC16. view full answer...
Replacement tarps/covers for tonneau covers, such as the Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover # TX1117651, are designed to be replacements for specific models of tonneau cover; this cover is designed to be a replacement for the TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX581101 which fits your 2005 Chevy Silverado 2500 with a 6-1/2 foot bed.
So to put it simply, if you have the Lo Pro # TX581101 then the Replacement Cover # TX1117651 will fit. If not, I would... view full answer...
The Convert-A-Ball Interchangeable Ball Set # 902B can install on any class of ball mount that has a 1-inch diameter ball hole and whose ball platform is not too thick for the shank which is 2-1/4-inches long. This multi-ball part will fit properly on a ball platform up to 1-1/8-inches thick. I confirmed this with Convert-A-Ball. This item is rated for 10,000-lbs towing no matter which ball size is installed.
For example, the Convert-A-Ball Ball Mount Class IV Ball Mount # AMSC2 has a... view full answer...
It may be possible to re-wire the K-Source Custom Extendable Towing Mirrors - Electric/Heat part # KS62139-40G however, it is not recommended or necessary because there are easier options.
I recommend to use CIPA Magna Custom Extendable Electric towing mirror part # CM70121 for the driver's side and part # 70120 for the passenger side. The CIPA mirrors are replacement mirrors for the 2000 Chevrolet Silverado that extend for towing. However, you may lose LED turn signals, automatic dimming,... view full answer...
The Sidewinder Fifth Wheel King Pin with Rotating Turret, # RP61412, that you have referenced is compatible with the Reese 5th Wheel trailer hitches. You will need a stationary trailer hitch like # RP30047. I have included a video review of the hitch, a video showing the installation of a Sidewinder, and a link to the Sidewinder installation details for reference.
I have also included a link to an FAQ article that explains what products the Sidewinder is NOT compatible with, as well as... view full answer...
If you trim an opening where the bed liner is covering the stake pockets on your 2010 Chevrolet Silverado, you should be able to install the Erickson Heavy-Duty Anchors # EM01003.
Part # EM01003 is a universal fit item designed to fit most Chevy, GMC, Dodge, Ford and Toyota pickups. You will want to measure the stake pockets on your 2010 Chevrolet Silverado and compare with the measurements listed on the product page to see if they will fit your truck.
I have linked a video installation... view full answer...
Since you have a regular cab (single cab) the Rhino-Rack Vortex Aero Crossbars # RRVA137B-2 with the Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars # RRRLKVA will not work.
These feet are only going to work with the crew cab and extended cab models.
Instead, you'd want to use something the Rhino-Rack Aero Bar Roof Rack for Camper Shell # Y02-490B. These crossbars come with two RTC style tracks that'll get mounted to the roof of your vehicle and provide a c-channel for the included... view full answer...