Weld-On Universal Trailer Hitch for Use on 2008 Chevy 2500 HD with Knapheide Utility Body
Question:
2008 Chevy 2500 HD 2wd with a 8foot knaphede utility body with bumper will this work.
asked by: Scott
Expert Reply:
The Curt Class V Universal Weld-on Receiver Hitch # 15902 will fit to truck frames that have between 18- and 44-inches between the frame rails. It offers just over 10-inches of drop.
You can measure the distance from your frame rails where this will weld on down to the bottom of the utility body/bumper to determine if the 10-inches of drop is adequate. If not you will be better off using Draw-Tite # 41990-16. This universal-fit hitch is intended for utility body trucks and has brackets that provide up to 16-inches of drop.
Products Referenced in This Question
Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2"
- Heavy Duty Receiver Hitch
- Weld-On
- 44 Inch Wide
- 1600 lbs TW
- 16000 lbs GTW
- Class V
- 2 Inch Hitch
- 16 Inch Drop
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Class V Universal Weld-on Receiver Hitch and Brackets with 10.865" Drop
- Heavy Duty Receiver Hitch
- Weld-On
- 18 - 44 Inch Wide
- 1200 lbs TW
- 12000 lbs GTW
- Class V
- 2 Inch Hitch
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Measure a Trailer Axle
- Article: Car Camping Checklist
- Q&A: Do Other Wires Need to be Installed on 2023 Honda CR-V With Curt 4-Way C56370
- Article: Flat Towing Package for 2002-2004 Jeep Liberty
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Q&A: Replacement Hub for Old Boat Trailer with 07100 Bearing
- Q&A: Dexter Self-Adjusting Electric Brakes for a Dexter 4400 Pound Trailer Axle
- Article: Flat Towing Package for 2005-2007 Jeep Liberty
- Q&A: Trailer Hitch, Wiring, and Brake Controller for 2010 Mitsubishi Fuso FE145
- Q&A: Bearings For Older Trailer Hub 22834
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Q&A: Replacement Surge Brake Actuator To Replace Tie Down Model 125 12,500LB Drop Actuator
- Article: How to Choose the Right Trailer Hitch Class
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)