Expert Answers about Chrysler Sebring

• Base Plate Kit for a 2010 Chrysler Sebring Convertible
• Yes, the Blue Ox Base Plate Kit part # BX1984 will fit your 2010 Chrysler Sebring with a convertible top. This base plate kit is an excellent option as it has removable arms which provide for a clean look while not in tow. If you are also looking for a towbar to use with this base plate kit I recommend the Blue Ox Alpha Tow Bar part # BX7380 which has a non-binding design for easy hooking/unhooking and includes safety cables. I have attached a photo of what the base plates will look like...
  view full answer...


• Will the Thule OutWay 2 Bike Trunk Mount Bike Rack Fit a 2004 Chrysler Sebring Sedan
• Yes, Thule does list the OutWay 2, # TH45JV, as a fit for your 2004 Chrysler Sebring sedan. I had a chance to use the OutWay series of racks and they are probably the easiest racks to put on/take off. What makes it so easy is because it uses retractable cables instead of straps to secure to the vehicle. If you will be carrying women's, children's, or alternative frame bikes, I recommend using the bike adapter bar, # TH982XT, in order to hold the bikes more level. I have included links...
  view full answer...


• Trailer Hitch and Wiring for a 2008 Chrysler Sebring Convertible with Dual Exhaust
• Draw-Tite trailer hitch # 24871 will fit your 2008 Chrysler Sebring convertible with dual exhaust. It can be used to tow a rental trailer. The hitch has a 2,000 pound gross trailer weight capacity but check the vehicle owners manual to the Sebring's capacity and go by whichever is lower. You will need the proper ball mount, part # 3594. To add a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use # 118444 to add a 4-Way flat connector. I have...
  view full answer...


• What Size Transmission Lines are on a 2006 Chrysler Sebring with a 2.7L V6 Engine
• The Derale Transmission Line Compression Fitting Kit is designed to allow for you to connect a rubber hose to a steel line. The lines coming from the transmission are generally steel and the aftermarket transmission coolers will almost always use rubber hoses therefore, a fitting to connect the factory steel transmission cooler lines to the rubber hoses on an aftermarket transmission cooler is needed. The factory steel transmission lines on your 2006 Chrysler Sebring are most likely a...
  view full answer...


• Ground Clearance for Carrying Bikes w/ a Draw-Tite Trailer Hitch, 2004 Chrysler Sebring Convertible
• First, because the Curt trailer hitch # C1190 is a Class I trailer hitch, make sure that the bike rack you use is compatible with a Class I trailer hitch. If you need a compatible bike rack, I recommend the Swagman Titan, # S63400. It carries 2 bikes, fits a Class I, and comes with an integrated cable lock. You will also need a stabilizer strap like # 18050 when carrying bikes or cargo with the Curt hitch. I have included a link to a video review for you. This rack also has a rise in...
  view full answer...


• Trunk Mount Bike Rack Options for a 2004 Chrysler Sebring Convertible
• We have a few trunk mount bike racks from Hollywood Racks that are confirmed to fit for your 2004 Chrysler Sebring Convertible. I have attached a link to the entire selection for you to check out. The bike racks that I would recommend looking at are the Expedition 2, # HRF6-2. This rack has adjustable arms that move independently from the support legs. I have attached a demonstration video for you to check out. If you plan on carrying any women's, children's or alternative frame bikes,...
  view full answer...


• Hitch Compatibility with Dual Exhaust on 2008 Chrysler Sebring Convertible
• The Curt Class I receiver you mentioned, part # C11081 is compatible with the Sedan model only. Draw-Tite tells me that their Class I receiver # 24871 is a fit for the 2008 Sebring Convertible, regardless of the exhaust set-up. To complete your towing set-up, you might also need the following: Vehicle wiring harness with 4-pole trailer connector, part # 118444 Drawbar # 3594 Pin and Clip # PC2 1-7/8 inch trailer ball, part # 19256 or 2 inch trailer ball, part # 19258 To see installation...
  view full answer...


• Trailer Hitch Receiver and Other Parts to Tow a Trailer with a 2010 Chrysler Sebring Convertible
• The Curt Trailer Hitch Receiver # C11081 is confirmed to fit the 2010 Chrysler Sebring sedan but not the convertible model. For the convertible use Draw-Tite # 24871 that is confirmed to fit. If you're going to be towing a trailer with the Sebring then you'll need trailer wiring as well. Use # 118444 which plugs in behind both tail lights. Also the recommended ball mount is the Draw-Tite # 3594. It gives you 4 inches of rise. The compatible hitch ball is # 19256 for a 1-7/8 inch ball...
  view full answer...


• Which Trailer Hitch Pin Lock Will Fit a Thule Roadway Bike Rack
• Many companies, like Thule, use their own in-house design for parts and accessories. The only locking hitch pin/anti-rattle device that will work on Thule Roadway Bike Racks, like TH912XT, TH914XT, or TH915XT, would be the Thule brand. The bike racks have a uniquely threaded hitch pin hole that matches the design of the lock. You would need Thule Snug Tite Hitch Lock and Anti-Rattle Device, # THSTL2. I have included a link to a video review of this lock for reference.
  view full answer...


• Recommend Correct Trailer Wiring For My 2010 Chrysler Sebring
• For the correct wiring for your 2010 Chrysler Sebring, you would need Draw-Tite Custom Fit Vehicle Wiring, part # 118444, which plugs in-line with your tail light wiring connectors and connects to your battery via included fuse. The item you selected, T-One Vehicle Wiring Harness, part # 118417 is designed to fit the 2006-2011 Chevrolet Impala. The item you referred to, 4-Pole 60 Inch Long Vehicle End, part # 18002, will not work for on your Chrysler Sebring as it has a 3-Wire System...
  view full answer...


• How To Use a Blue Ox Aladdin Tow Bar With Roadmaster Crossbar-Style Base Plate Kit
• If you wanted to use the Blue Ox Aladdin Tow Bar part BX4325 with a set of Roadmaster Crossbar-Style Base Plates you would need an adapter, the Roadmaster Tow Bar Adapter part # RM-032.
  view full answer...


• Trailer Hitch Receiver and Bike Rack for a 2010 Chrysler Sebring Convertible
• You'll need a couple things to tow, the first of which is a hitch. For the 2010 Chrysler Sebring, the Draw-Tite Class I Sport Frame, part # 24871 is a confirmed fit. It has a no-drill installation process, so it should be easy for you to install. I've included a video of it being installed on a 2008 Chrysler Sebring soft top convertible, so you can get an idea of the installation process. If you're going to be towing a trailer with the Sebring then you'll need trailer wiring as well....
  view full answer...


• Which Hitch Fits a 2006 Chrysler Sebring 4d Sedan
• I have a solution for you, but the Curt # C11190 will not also fit on the 2006 Chrysler Sebring Sedan; it's only going to fit on the 2d convertible versions. Instead you'll want to use the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12186, which will fit on the 4d Sedan versions of the Sebring and also has a 1-1/4" that's great for carrying bike racks or towing a small trailer. This is a durable Curt trailer hitch that installs without any drilling required, so it's...
  view full answer...


• Is There a Class II Trailer Hitch Receiver Available for a 2008 Chrysler Sebring Convertible
• The only trailer hitch receiver option for your 2008 Chrysler Sebring Convertible is the Draw-Tite Sportframe # 24871, which is only a Class I hitch. Due to the design of your Sebring, there are no Class II options available. This trailer hitch has a Gross Trailer Weight (GTW) of 2,000 lbs and a Tongue Weight (TW) of 200 lbs. I checked an online version of a manual for you Sebring and if had the same weight capacities that this hitch has, but you will want to check your copy of the owner's...
  view full answer...


• Do Swagman Upright Roof Bike Carrier S64720 & SportRack Kayak Carrier SR5511 Fit Rhino-Rack Bars
• The Rhino-Rack square bar 2500-Series roof rack made of parts # RRVA126B-2, # RRRLKVA, and # DK199 is a confirmed fit on your 2010 Chrysler Sebring 4-door. Both the Swagman Upright Roof Bike Carrier # S64720 and the SportRack J-Style Kayak Carrier # SR5511 are fully compatible with this roof rack. Installation videos for all three products are linked for your reference.
  view full answer...