Trailer Hitch Receiver and Other Parts to Tow a Trailer with a 2010 Chrysler Sebring Convertible
Question:
Will the Curt #11081 hitch fit my 2010 Chrysler Sebring convertible? It is listed on your web site as fitting a sedan.
asked by: Rick
Expert Reply:
The Curt Trailer Hitch Receiver # C11081 is confirmed to fit the 2010 Chrysler Sebring sedan but not the convertible model. For the convertible use Draw-Tite # 24871 that is confirmed to fit.
If you're going to be towing a trailer with the Sebring then you'll need trailer wiring as well. Use # 118444 which plugs in behind both tail lights. Also the recommended ball mount is the Draw-Tite # 3594. It gives you 4 inches of rise. The compatible hitch ball is # 19256 for a 1-7/8 inch ball and # 19258 for a 2 inch ball.
If you need a ball mount with a different rise or drop I've attached a link of our selection of ball mounts for a 1-1/4 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once you choose a ball mount you can then choose a hitch ball to fit it.
For a pin and clip use # PC2.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Can the Kodiak 13" Hub and Rotor be Used as a Oil Bath Hub
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Picking Out Replacement Actuator Shock for Gabriel MPD 85746
- Q&A: Replacement Oil Seal for AL-KO 568303
- Article: Trailer Hitch Receiver Sizes
- Article: Best Bike Racks for Electric Bikes
- Q&A: Recommended 4-Way for a 2004 Chevrolet Silverado Without Tow Package
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Hitch and Bike Rack for a 2012 Chrysler 200 Convertible
- Q&A: Recommended Bike Rack and Trailer Hitch Receiver 2012 Chrysler 200 Convertible
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Rooftop Cargo Carriers