Can The Redarc Tow-Pro Liberty RED24FR Be Installed On A 2019 Ford Ranger W/ Curt 7-way Connector?

Question:

I bought the plug and play 7 way port from you guys. I installed that a few months back. I just bought the red arc tow pro liberty. Will this work for me? Im guessing all I have to do is run a wire from the redarc harness to the back of the truck where the extra wire is.

asked by: Joshua S

Expert Reply:

You can absolutely install the Redarc Tow-Pro Liberty # RED24FR in your 2019 Ford Ranger that has the Curt 7-way Connector Harness # C56431 installed, you will just need the universal wiring harness # RED69FR.

While Ford did not run a trailer brake controller port for installing a trailer brake controller like some other vehicles have, they did run the four wires you need. These will be located underneath the dash near the driver side wheel well and will be bundled together.

Inside the bundle you will have a blue wire which will get connected to the blue wire of the # RED24FR, a yellow/red wire that will get connected to the black wire of the controller, a white/purple wire that will get connected to the red wire of the controller, and a white wire that will get connected to the white wire of the controller.

You will not need to run any additional wires to get a controller installed.

I included videos of the products mentioned for you to take a look at.