You're correct that the Fullback 2 and MonoRail are both very highly recommended and are very high quality bike racks; I've recommended both of these to our neighbors depending on their particular vehicle and needs. With that said, the Yakima Fullback 2 # Y02633 and RockyMounts MonoRail # RKY10003 are two different types of rack in that one is a trunk mounted rack and the other is a hitch mounted rack; they're not really comparable since a trunk mounted rack is typically only used when... view full answer...
Since your RDX already has a 2-inch hitch like Draw-Tite # 75784 you are all set for installing a 2-bike carrier for your beach cruiser and electric bike. We do have a rack that will fit your hitch, handle your bikes' higher weights and also be exceptionally easy to use: The Thule Easy Fold platform carrier # TH903202 which is shown in the review video I linked for you.
This platform style carrier will fit both 1-1/4-inch and 2-inch hitches, it handles two bikes up to 65-lbs each, it includes... view full answer...
Yes. I recommend using the Curt # C13130 because of the durability of the powder coating on their hitches. This has a 2" receiver that provides you with a better variety of hitch mounted accessories and is much better suited for towing if the need arises.
If you're going to be towing, I've listed the appropriate wiring harness and other parts you'll need to complete your towing setup below.
Wiring: # 118569 (Tekonsha has the most reliable converter boxes)
Ball Mount/Hitch Ball: # 989900... view full answer...
Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver item # 76268 does fit your 2022 Acura RDX. This hitch is custom fit and bolts directly to your Acura with included hardware. Since you have the 18' spare tire you will have no problems with this hitch. The issue comes from the RDX's with the larger spare tires. Yours will fit neatly back where it sits now once the hitch is installed. view full answer...
All the roof rack options we offer for your son's 2007 Acura RDX would use the clamps that grab the upper door jambs, unfortunately nothing available would use existing mounting points on the vehicle's roof.
The door jamb clamps are actually a tried and tested solution for attaching a roof rack to a vehicle that works very well. The clamps are coated so the won't scratch the vehicle, and if properly installed, they'll be on there securely enough that you can grab the roof rack and rock... view full answer...
I recommend installing The etrailer Hitch # e72AR on your 2021 Acura RDX. We tried to install the # 76902 on a 2020 Acura RDX and there was no holes for it to mount up to and not enough room between the spare tire and the rear fascia to fit it. The hitch will only fit the 2010-2018 RDX.
The etrailer hitch has a bolt-on installation with no welding required. It has a matte black powder coat finish that is over a protective base coat that offers a superior rust resistance. The etrailer... view full answer...
We have just what you need, but there is not a Class II hitch for your 2010 Acura RDX; instead there are Class III hitches with 2" receivers that are rated higher than a Class II, so they're well suited for your needs. I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75784 which installs without any drilling required and will have a little bit better ground clearance than the Curt # C13154 that is also a confirmed fit for your RDX.
For the... view full answer...
When it comes to using a hitch adapter to make your 1-1/4 inch hitch to a 2 inch hitch it does decrease the tongue weight by 50%. The only way you could use The Yakima EXO SwingBase Swing Away Hitch Extender - 2 inch Hitches # Y34VR would be to switch to a 2 inch trailer hitch like The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # C95CR.
The trailer hitch has a gross trailer towing weight up to 3,500 pounds and a gross tongue weight up to 350 pounds. I would check your... view full answer...
First I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75784 for your 2016 Acura RDX. This class III receiver is rated for up to 400lbs of tongue weight and a towing capacity up to 4,000lbs. Be sure to verify maximum towing capacity with your Acura dealer. The receiver has a mounting tab for the 7-way connector so you will not need to drill holes in your fascia.
The T-One Vehicle Wiring Harness # 118569 is needed to control the lighting for the trailer. This will connect directly... view full answer...
Yes, the Curt Trailer Hitch Receiver # C95CR will fit the trim package on your 2022 Acura RDX. With the factory trim piece the hitch will not be very hidden. The hitch does have a simple bolt-on installation process and requires no drilling or welding.
When installing the trailer wiring harness, I recommend the T-One Vehicle Wiring Harness # 118800. I like this harness over the others that we offer because it has a more reliable powered converter box that will give you a longer running... view full answer...
I can help you select the components needed to equip your 2010 Acura RDX to tow a small trailer with electric brakes.
For a 2-inch hitch I suggest the no-drill installation Draw-Tite # 75784 which offers a 4000-lb towing capacity (check your RDX owner's manual for the car's rating). If you have no trailer wiring connector now you can use 4-pole kit # 118500 along with our brake controller install kit # ETBC7. These two parts include all components needed to have a functional 7-way trailer... view full answer...
We do not have that exact battery disconnect relay you are referencing, however, we have the Roadmaster Automatic Battery Disconnect with Switch for Towed Vehicle w/ Supplemental Braking System # RM-766.
This disconnect switch will work with almost all 12V batteries and comes pre-assembled for ease of installation.
This product, however, should only be installed on the towed vehicle in which a battery must be disconnected for towing. view full answer...
To order the exact replacement hardware that was originally included with a trailer hitch receiver that we carry use part # RHK and select the manufacturer from the drop down menu and enter the part number of the hitch.
You said you have a Draw-Tite but not the model number of the hitch you have. If you aren't sure let me know the year, make, and model of your vehicle and I'll find the correct model number. Also, a picture of the hitch might be helpful too. view full answer...
Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver item # 76268 will fit your 2022 Acura RDX's trim piece. I have attached a picture to show you what this hitch will look like installed on your vehicle. This hitch is custom fit and bolts directly onto your RDX with included hardware. It does not require any drilling or welding.
If you are hauling a trailer you will need a wiring harness to control your trailer's lighting functions. I recommend the Tekonsha T-One Vehicle Wiring Harness... view full answer...
Go To Results