Expert Answers about Audi Q3

• Trailer Hitch to Carry a Motorcyle Carrier with Total Tongue Weight of 450 lbs for a 2015 Audi Q3
• The Draw-Tite Max Frame Trailer Hitch, # 75218, is the confirmed fit hitch for your 2015 Audi Q3. The hitch does have a tongue weight rating of 450 lbs and you will not need to use a stabilization strap on the Draw-Tite product. The only permanent modification you will do to your Audi Q3 is when installing the hitch you will need to trim 3-1/2 x 3-1/2 inch hole in the bumper fascia so the receiver tube will be accessible. I check the owner's manual for the 2015 Q3 and it states that your...
  view full answer...


• Pewag Tire Chain Availability For 2016 Audi Q3 With 255/40R19 Tires
• The Pewag Servo RS Self-Tensioning Snow Tire Chains # PWRS80 are not a fit for your 255/40R19 tires. There are not any Pewag options available for your specific tire size other than their lower end Glacier Chains made of low-carbon steel instead of the titanium alloy steel of the chains you mentioned. I recommend checking your owners manual for any specifics regarding tire chain limitations. I tried to check for you but Audi requires a VIN number to view the manuals online. I have...
  view full answer...


• Are There 23mm or 24mm Adapters For Konig Premium Self-Tensioning Tire Chains, Part # th02230k55
• I spoke to a representative from Konig and I was informed they do not have a lug nut adapter larger than 21mm for the Konig Premium Self-Tensioning Snow Tire Chains - Diamond Pattern - D Link - K-Summit XL - Size K55, part # th02230k55. You can still go with the Konig Self-Tensioning, Low-Pro Snow Tire Chains - Diamond Pattern - D Link - Easy Fit SUV - Size 247, part # TH04115247. These tire chains are Class S compatible, so they will fit wheel wells with tight space tolerances. In addition,...
  view full answer...


• Recommended Class III Hitch for 2020 Audi Q3
• You can install a hitch like the Draw-Tite # DT68MR, which is a Class III hitch with a 2" receiver that will allow you to carry your Thule bike rack; a 2" receiver is ideal for towing as well, so you'll be well prepared if the need arises in the future. I've linked our entire selection of trailer wiring harnesses for your Q3 in case you wanted to be proactive on the towing parts. You'll also need a ball mount, hitch ball, hitch pin and clip; you could piece everything together or just...
  view full answer...