The Class III Draw-Tite Trailer Hitch, # 75599, for the 2006 Honda Pilot does not come with a ball mount, pin, clip, or ball. Only the Class II and I hitches we sell come with a ball mount, pin and clip. This is because the lower Class hitches have to use a certain ball mount according to the manufacturer for safety. A Class III trailer hitch does not have this restriction.
A Class III trailer hitch will also have a higher capacity and is compatible with more accessories than Class I and... view full answer...
There really isn't a difference between the two ladder racks you mentioned. The TracRac # TA37001 and the Thule TracRac # TH37001XT are both great ladder racks made by the same company but under different brand names. Either one will give you the same ladder rack. Most likely will we eventually go down one part number though. view full answer...
Yes, the license plate bracket of the Thule Arcos Enclosed Cargo Carrier # TH25YE does have a light on it to illuminate the license plate. view full answer...
There should be 2 relays and 1 fuse in trailer wiring harness # 118265. So it does sound like you have all of the pieces.
If you look at picture F in the instructions, linked for reference, there is only the one open fuse location. view full answer...
Since you don't have any trailer wiring harnesses on your 2020 Honda Pilot you'll want to start with adding a wiring harness; for that I recommend using the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # 118286. You can also use the Pollack # PK12711U as the mounting bracket for this connector to give this a nice, clean installation.
For the brake controller, I recommend using the Curt Echo Mobile # C51180 since the installation won't require any splicing... view full answer...
Fuses are included with the T-One Vehicle Wiring Harness for Factory Tow Package # 118760 that you referenced now. I attached a picture that shows the ones that are included. view full answer...
The Roadmaster Falcon 2 Tow Bar, # RM-520 is hitch mounted style tow bar that mates to either Roadmaster's direct connect or crossbar style base plates. For the 2013 Honda Pilot that would be the Roadmaster Crossbar-Style Base Plate Kit, # 521568-1. That includes all needed brackets to install on your Honda Pilot.
Please note the attached product review video. If you would like suggestions on a complete tow package set-up for your Honda including all needed wiring, supplemental braking... view full answer...
The wiring kit you selected, Tow Ready Custom Fit Vehicle Wiring, part # 118491, would just give you a 4-way connector at the rear of your 2009 Honda Pilot, only requiring one relay.
The other wiring kit that we offer, Honda Pilot Replacement OEM Tow Package Wiring # 118253, includes 2 relays as it is a replacement for the OEM tow package wiring. Part # 118253 would require 2 relays as it gives you a 7 way connector. The kit that you referenced from Honda is more than likely part # 118253.
If... view full answer...
No, the anchor post is not included with the Roadmaster Brakemaster supplemental braking system # RM-9100. It does come with all of the other parts needed for installation (air line, fittings, hardware, and so on). The anchor plate is # 450650-01. Once it arrives you will be able to install it and the seat adapter that you already have! I have also included a link to the installation details for this braking system for you. view full answer...
Yes, the relays and fuses and hardware needed to install the Honda Pilot Replacement OEM Tow Package Wiring, item # 118253, are included. view full answer...
The six bolts that come with the Draw-Tite Max-Frame Trailer Hitch Receiver # 75599, which is a confirmed fit for your 2008 Honda Pilot, are M12 x 1.25 x 35mm CL8.8. You will also need six 1/2" Conical Washers.
You can purchase the replacement hardware from our site using part # RHK. All you will need to do is simply click on the part number and then select the hitch manufacturer (Draw-Tite) and then input the hitch part number (# 75599). We will ship you all of the hardware that is necessary... view full answer...
Wiring harnesses are not included with Curt hitches. Hitches include the hardware needed to mount the hitch to the vehicle. Some Hidden Hitch models will included a draw bar and pin and clip. There are a handful of Valley hitches that have integrated wiring.
For your 2005 Honda Pilot, you would use either part # 118336 or part # 33105 for a trailer wiring harness. view full answer...
The Andersen Camper Wheel Chock and Leveler # AM3604 come with 1 chock and 1 leveler for one side of your axle.
To properly chock your trailer you need 2 of these kits. view full answer...
The 7-way that comes with the # 118286 is a standard 7-way design that is different from the Honda 7-way harness for your vehicle. This uses a 4-bolt mounting bracket whereas the one that comes from Honda uses a bracket for the 7-way that uses 2 bolts on the bottom of it.
This 7-way will still work and could potentially still fit in the cut out area of your Pilot but it may require modification. The one we offer will also be much less expensive. view full answer...