In order to have brake connectivity between your 2014 Jeep Patriot and your trailer, you will first need to install a 4-way connector such as # 118552. The T-one connector plugs directly into your Jeep's existing wiring. I have included installation details and a link to a installation video.
You will also need the Universal Installation Kit for Trailer Brake Controller # ETBC7. The brake controller installation kit includes everything necessary for converting your 4-way connector to a... view full answer...
In order to flat tow your 2014 Jeep Patriot, you'll need a tow bar which you already have, base plates, a wiring setup, a supplemental braking system and possibly a high/low adapter.
The Roadmaster # 521441-1 would be a fine choice for a base plate, as long as your Patriot isn't equipped with the tow hooks up front. If you do have the tow hooks, you'll need to go with the Blue Ox # BX1130 along with a # RM-031 adapter. If you don't already have the necessary safety cables, use # RM-643.... view full answer...
Stop, turn and tail light functions can be provided by basic 4-pole wiring, such as by the trailer wiring harness # 118552 that fits your 2014 Patriot or a flat towing (dinghy) harness that connects the RV lighting signals to the dinghy.
If you are looking to add the cargo box lights as supplements to your standard flat tow lighting you will want to consider a few things. First, additional lights will demand more power and so I suggest using high-efficiency LED type lights that will be... view full answer...
First, I recommend checking your owner's manual for your vehicle's maximum gross trailer weight rating. It is important to ensure the trailer you want to tow doesn't weight more than is recommended for your vehicle. Based on my research, the 2008 Jeep Patriot without a tow prep package is rated for a maximum gross trailer weight of 1,000 pounds. With a tow prep package the 2008 Patriot is rated for a max gross trailer weight of 2,000 pounds.
To install a 7-way trailer connector in your... view full answer...
A 7-Way trailer connector has a few more functions than a 4-Way. Namely, it provides a reverse light circuit, a brake controller circuit for trailers with electric brakes, and a power circuit for trailers with batteries or large electrical systems. I have added a link to an FAQ page that talks about the differences between all of the common trailer connectors that should shed more light.
None of these functions are on typical rental trailers. The 4-Way is the standard for basic trailers.... view full answer...
According to the owners manual for the 2014 Jeep Patriot in the recreational towing section, you can only flat tow the vehicle if it has a manual transmission. If it is an automatic it cannot be towed with all 4 wheels on the ground.
It can be towed on a tow dolly, such as # RM-2050-1, with the front axle on the dolly. This only works for front wheel drive models and would work with manual or automatics.
And of course, the third option is to tow the vehicle on a trailer with all 4 wheels... view full answer...
When using the Rhino-Rack J-Style Kayak Carrier, # S512, on your 2011 Jeep Patriot with factory raised side rails and no cross bars, you can use the Evo Raised Rail Feet # TH710401 and 53" WingBar Evo Crossbars # TH711420 and locks # TH450400. I have linked a video showing installation of this roof rack for you. view full answer...
In order to use the Blue Ox Baseplate Kit # BX1130 with a Roadmaster Nighthawk All Terrain towbar # RM-676 you'll need the RoadMaster Nighthawk or Sterling Tow Bars to Blue Ox Brackets Adapter # RM-031-5. This is the correct adapter for the Blue Ox baseplates to be used with that tow bar view full answer...
Yes, all the hardware is included in The Blue Ox Base Plate Kit # BX1130 which is confirmed to fit your 2016 Jeep Patriot. The baseplate has a durable steel construction that is powder coated that helps resist rust and corrosion. If you're wanting to use a Roadmaster tow bar you will need adapter # RM-031 or RM-031-5. If you have a Demco Towbar you wil need adapter # BX88310.
I attached an installation video link of the baseplate being installed on a 2011 Jeep Patriot. The installation... view full answer...
I have a solution for you. Unfortunately, we do not carry (and they do not make) front trailer hitches for your 2010 Jeep Patriot.
However, we do carry rear hitches for your vehicle. For a great economic hitch with a 525 pound maximum tongue weight and 3,500 pounds of maximum gross towing weight, I recommend the Draw-Tite Trailer Hitch Receiver - 2" # 75712. The Draw-Tite has a 6-inch distance from the center of the pinhole to the end of your rear bumper, so you will be able to use 2-inch... view full answer...
In order to make your 2017 Jeep Patriot ready to tow, we need to start with the recommended base plates # 521441-1. This product works with your manual transmission.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting... view full answer...
Typically when the owner's manual says to keep the key in the ACC position it is to keep the steering wheel locked. If that isn't the case with your 2017 Jeep Patriot then I am not sure why you need to keep it in that position but I can say that it is always best to do what the manual says to avoid damage to your vehicle. For the odometer I have been told that it is hit and miss and that the dealer must be contacted...which doesn't sound like that worked out for you. You could test this... view full answer...
When mounting a bike like an Electra Townie, which can have a very low-slung frame tube, on a platform style rack like the high-value Swagman XC # S64650 you can use a bike adapter bar to make it easier to secure the Townie on the carrier.
Adapter bar # UB01 connects between the seat post and handlebar stem to provide the equivalent of a horizontal top frame tube, as is found on a typical man's bike frame. This give you a perfect substitute mounting point for the XC's ratcheting hooks.
Please... view full answer...
Go To Results