The part you referenced, the Thule Passage 2 Bike Trunk-Mount Carrier # TH910XT, will fit the 2002 Mitsubishi Mirage LS 2-door coupe model. I've linked at right a video showing this rack's installation.
This rack features Thule's patented Fit Dial adjustment system that ensures a perfect fit on your Mirage. It is protected by Thule's limited lifetime warranty. view full answer...
I recommend using the Demco Kar Kaddy X Tow Dolly w/ Disc Brakes - Tilt Bed Frame - 4,800 lbs - Wide Tread # DM9713093, which has hydraulic surge brakes and has plenty of capacity to handle the curb weight of your 2019 Mitsubishi Mirage LE. I really like that this dolly has a tilting bed so that you can load and unload a bit easier. You may also need a license plate bracket, which is available with part # DM39VR.
The Demco Kar Kaddy X doesn't require the use of a brake controller or 7... view full answer...
Based on my research it looks like your 1997 Mitsubishi Mirage with the automatic transmission can only be flat towed if you install a lube pump. This is needed to prevent damage to the transmission while it's being pulled. I do also recommend that you check your copy of the vehicle's owner's manual to verify this or to read any other restrictions when it comes to towing the Mirage.
With the above in mind your best option is likely to pull the vehicle using a trailer or tow dolly so you... view full answer...
From my research the 2014 Mitsubishi Mirage can not be flat towed as is. However, we always suggest that your consult your vehicle specific owners manual for most accurate knowledge. view full answer...
The thing with tow bars is that they are not vehicle specific but rather base plate specific. For instance, the Blue Ox Acclaim Non-Binding Tow Bar - Car Mount # BX4330 you were looking at work with any 2" ball, as well as any Blue Ox base plates that are spaced between 23" and 30" apart on center.
This base plate can be adapter to fit Roadmaster cross-bar style base plates with the RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter # RM-033.
While the tow bar you were looking... view full answer...
Per the owner's manual for your 2015 Mirage, it cannot be flat-towed.
You can, however use a tow dolly like the RoadMaster Tow Dolly with Electric Brakes, part # RM-2050-1. Using a tow dolly does eliminate the need for base plates on your mirage and also the need for a tow bar.
You will need a brake controller like part # 90885. This is one of our most popular because it is easy to install and operate.
Since the tow dolly comes with a 4-way connector you will need to replace it with... view full answer...
From the 2020 to the 2021 model year, there were no appreciable changes in the design of the Mitsubishi Mirage, so the Curt # C11394 would be a fit for your 2021 model.
If you click the provided link, you can see my buddy Rob installing a # C11394 hitch on a 2019 Mirage. view full answer...
Performance tuners can, in a suitable vehicle, provide increased horsepower and torque by changing the engine tune. Naturally, if you're getting substantially more horsepower and torque from an engine you will be consuming more fuel in the process.
Tuners often include a driving coach program. These function as a guide to help you recognize driving behaviors that negatively affect your mileage performance. The driving coach program in a tuner like Edge # EP69YR does not change the vehicle... view full answer...
I was able to find that your ground clearance on your 2019 Mitsubishi Mirage is 6.3". With that the length from the front of your bumper to where your front tires contact the ground must be 27" or less for it to fit on the Demco Kar Kaddy SS Tow Dolly # DM9713045. You will have no issues as your Mirage width is 65" and the dolly will accept 42-76" widths.
The Demco Kar Kaddy X Tow Dolly # DM9713093 will allow for some lower vehicle to fit as it has a 4 degree lower load angle. It will... view full answer...
The black WeatherTech Front Auto Floor Mats # WT446001 will fit your 2015 Mitsubishi Mirage without any cutting or trimming required. They will use the same grommet attachment point as your OEM floor mats.
Since these black floor mats are the custom-fit type, they will fit your Mirage perfectly.
For your second row mat we have the # WT446002 and for the cargo area mat we have the # WT40680.
WeatherTech products use precision laser modeling to provide an exact fit around each contour... view full answer...
Yes, the Curt Stabilizer strap part # 18050 can be ran to the bottom lip of a car's hatch if needed.
I attached a review video that shows it ran to the top of the hatch on a vehicle, but running it to the bottom would also work. view full answer...
According to the owner's manual for your 2015 Mitsubishi Mirage, the vehicle cannot be flat-towed. Instead, you will want to use either a trailer or tow dolly. Using a tow dolly will usually be the most cost effective way to tow a vehicle. It will also require far less modifications to the vehicle if any in addition to providing the least amount of stress.
For a tow dolly that will work well for you, I recommend using the Roadmaster Tow Dolly part # RM-2050-1. The Roadmaster Tow Dolly... view full answer...
The only solutions we have to tow a 2020 Mitsubishi Mirage behind a vehicle is with a tow dolly like the Demco Kar Kaddy SS part # DM9713045 as there aren't any base plate kits available for it. view full answer...
For a trailer hitch the Curt part # C11394 has been confirmed as a fit and would work well. For a ball mount you would want the part # C45521, for a Hitch Ball with 1-7/8" Diameter and Medium Shank # A-80, for a 2 inch ball # A-82.
For trailer wiring you would want part # C56223. view full answer...
I do have a hitch adapter that allows you to use the Curt Class I receiver hitch part # C11394 with the 2" bike rack. The Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver part # HTAD will fit into the Class I hitch and give you a 2" opening to fit the bike rack however it does cut the tongue weight rating of your hitch in half. The new tongue weight capacity rating of the Curt Class I with the use of the adapter is 100 lbs. If the weight of your bike rack and bikes does not exceed 100... view full answer...
Attaching/removing the wheels on the Viking Solutions Tilt-N-Go II Cart - Hitch Mounted - 300 lbs Item # 310-VTG002 is super easy. They are held to the axle with cotter pins. I have included a picture showing this for you. I have also linked the instructions which include instructions for this part and others from the same manufacturer. view full answer...
I do see that Curt has extended the fit for the Curt Trailer Hitch Receiver # C11394 to the current 2024 Mitsubishi Mirage. The only modification required is enlarging the access hole to pass the carriage bolt and square hole spacer into the frame. I have included an installation video near the bottom of the page which shows the hole being enlarged near the 6:30 mark of the video.
I recommend installing the Curt T-Connector Vehicle Wiring Harness # C56223 when you install the receiver.... view full answer...
When it comes to flat towing your 2018 Mitsubishi Mirage I recommend The Demco Kar Kaddy X Tow Dolly w/ Disc Brakes - Tilt Bed Frame - 4,800 pounds - Wide Tread # DM9713093.
The Demco Kar Kaddy has a maximum vehicle weight capacity up to 4,800 pounds. It is ideal for cars with front-wheel-drive with automatic transmissions. It has a tilting bed frame which allows for an easy loading and unloading of the vehicle.
The Kaddy includes a full LED DOT lighting package which includes the brake,... view full answer...
Go To Results